Be Sure to visit the store to see whats new

Author Topic: 321-187-RF (321323) -52- GB269  (Read 36592 times)

SwedeNelson

  • Administrator
  • Hero Member
  • *****
  • Posts: 1771
  • Bullet maker, maker
    • View Profile
321-187-RF (321323) -52- GB269
« on: March 01, 2016, 10:21:27 PM »
NOE 321 187Gr. RF (321323) 
We will be running this like a inventory run







Will be offering this in three sizes .321, .323 and .325

We will be running 1 cavity, 1 cavity Brass, 2 cavity, 2 cavity Brass, 3 cavity, 4 cavity, 4 cavity Brass, 5 cavity GC or PB.
We will offer mixed GC and PB in 2 cavity, 4 cavity moulds only, 1 each in 2 cavity and
2 each in 4 cavity (no mixed GC, PB in 5 cavity blocks).
 
Top punch, wrenches and sprue lube are extras now if you want them

Prices will be our standard website prices ( www.noebulletmoulds.com )
1 cavity $68.00
1 cavity Brass $90.00
2 cavity $79.00
2 cavity Brass $101.00
3 cavity $86.00
4 cavity $92.00
4 cavity Brass $114.00
5 cavity $99.00

Lyman/RCBS style Top Punch $5.00
Saeco style Top Punch $7.50
Mould Wrenches / Sprue Lube $2.50
RG2 blank pin set $4.50
RG4 blank pin set $9.00

Will run this as soon as we get 10 signed up and we get the tooling in.
Will have them listed on our website as a inventory item as soon as we have them ran
So you can use Pay-Pal, Credit Card or Check / Money order
Post a "I want" and receive a 15% discount off the website.

Please make sure your order is posted in this thread and contains the following information:

Number of cavities
Mould material, brass or aluminium
Gas check (GC) or plain base (PB)
Diameter required

We will PM a discount code for you to use at check out

If you have question - Visit our website or PM me

Thanks
Swede Nelson
« Last Edit: May 01, 2016, 05:47:19 PM by SwedeNelson »

SwedeNelson

  • Administrator
  • Hero Member
  • *****
  • Posts: 1771
  • Bullet maker, maker
    • View Profile
Re: 321 187Gr. RF (321323)
« Reply #1 on: March 01, 2016, 10:22:21 PM »
List of orders
1 Wader4 2 cavity brass PB .321"
2 Wader4 2 cavity brass PB .321"
3 Wader4 2 cavity brass PB .323"
4 bwgdog  1 cavity brass PB .323"
5 ssshooter 2 cavity brass PB .323"
6 OkeyMaple 1 cavity brass PB .321"
7 OkeyMaple 1 cavity brass PB .323"
8 rhbrink 1 cavity aluminium PB .323"
9 smbrj 2 cavity 1GC 1PB aluminium .321"
10 Longbow95 2 cavity PB brass .321"
11 bullshot 2 cavity PB brass .323"
12 Pentz 1 cavity PB brass .321"
13 Pentz 1 cavity PB brass .323"
14 frnkeore 2 cavity PB brass .323"
15 frnkeore 2 cavity 1PB 1GC aluminium .321"
16 Flatlander 1 cavity PB brass .321"
17 joe gussenhoven 2 cavity PB brass .321"
18 dromia 1 cavity PB brass .325"
19 dromia 1 cavity GC aluminium .325"
20 rhbrink 1 cavity PB aluminium .321"
21 jfeldman 1 cavity PB aluminium .323"
22 hi-wall56 1 cavity PB brass .323"
23 Longbow53 2 cavity PB brass  .323"
24 Dr Tom 2 cavity 1PB 1GC brass .323"
25 Dr Tom 2 cavity 1PB 1GC brass .325"
26 beehive 2 cavity PB aluminium .323"
27 LarryD 2 cavity PB brass .323"
28 Primers 2 cavity PB brass .323"
29 Irascible 2 cavity PB brass .323"
30 jimb16 base 1 cavity PB aluminium .325"
31 djryan 5 cavity PB aluminium .325"
32 paul3240athotmail.com 1 cavity PB aluminum .325"
33 4060may 4 cavity PB aluminium .323"
34 rmrix321 2 cavity PB brass .321"
35 GeorgeC 1 cavity  PB aluminium .321"
36 Fritz 1 cavity PB Brass .323" ASSRA
37 Mike 1 cavity PB aluminium .323" ASSRA
38 sportslube 2 cavity Brass .323" ASSRA
39 Bonner 2 cavity aluminium .321" ASSRA
40 Onkel 1 cavity GC aluminium .325"
41 jeffer1942 2 cavity PB aluminum .321"
42 jeffer1942 2 cavity PB aluminum .323"
43 jeffer1942 2 cavity PB aluminum .325"
44 TRK 2 cavity brass .323"
45 Larry D 1 cavity PB brass .323"
46 USCRA112 2 cavity PB aluminium .321"
47 USCRA112 2 cavity PB aluminium .325"
48 UtahDave, 1 cavity PB brass .323"
49 ss2830bal 1 cavity PB brass .323"
50 ss2830bal 1 cavity PB brass .325"
51 rr2241tx 2 cavity PB aluminium .323"
52 SR4440 2 cavity PB Brass .325"
53 Jim Betush 2 cavity PB brass .325
 

Sorry for any inconveniences But -
Please make sure you are on the list above
Sighing up on the ASSRA forum does not guaranty you are on our list.

Please make sure your order is posted in this thread and contains the following information:

Number of cavities
Mould material, brass or aluminium
Gas check (GC) or plain base (PB)
Diameter required

 

Bullet maker, maker
Al Nelson
« Last Edit: May 13, 2016, 03:13:50 PM by dromia »

bwgdog

  • 1000 Dollar Club
  • New Member
  • *
  • Posts: 36
  • Noe Guest
    • View Profile
Re: 321 187Gr. RF (321323)
« Reply #2 on: March 02, 2016, 04:45:36 AM »
Signed up for this with Frank over on the ASSRA forum . THANK YOU for running this mold for us Al !   :)

frnkeore

  • 1000 Dollar Club
  • Full Member
  • *
  • Posts: 195
  • Noe Guest
    • View Profile
Re: 321 187Gr. RF (321323)
« Reply #3 on: March 03, 2016, 08:42:28 PM »
Please note that the second band is marked .000. The actual width is .075. It's a glicth in the program. It happens to mine, also but, I edit it to the right size in another program.

Frank

Wader4

  • New Member
  • *
  • Posts: 3
  • Noe Guest
    • View Profile
Re: 321 187Gr. RF (321323)
« Reply #4 on: March 03, 2016, 10:55:06 PM »
I want 2 of the .321 base band bullets in a 2 bullet brass configuration. Oh heck, might as well put me down for 1 .323 base band 2 bullet brass also. Thank you Frank for all the work you put into this!

Wade

Wader4

  • New Member
  • *
  • Posts: 3
  • Noe Guest
    • View Profile
Re: 321 187Gr. RF (321323)
« Reply #5 on: March 03, 2016, 10:58:37 PM »
Ooops!!!! Forgot about the PB on all 3 molds. Thanks AL!!!!

Wade

jfeldman

  • New Member
  • *
  • Posts: 3
  • Noe Guest
    • View Profile
Re: 321 187Gr. RF (321323)
« Reply #6 on: March 04, 2016, 12:13:27 AM »
Hello, I would like one of the aluminum moulds for a .323 base band, plain based bullet.
Thank You.  A 2 cavity mould please

Regards, Joe Feldman

PS:  Thanks again Frank, for all the leg work.
« Last Edit: March 08, 2016, 01:08:03 AM by jfeldman »

longbow95

  • New Member
  • *
  • Posts: 2
  • Noe Guest
    • View Profile
Re: 321 187Gr. RF (321323)
« Reply #7 on: March 04, 2016, 03:39:22 AM »
Signed up with Frank on ASSRA for a brass .321 thank you

bwgdog

  • 1000 Dollar Club
  • New Member
  • *
  • Posts: 36
  • Noe Guest
    • View Profile
Re: 321 187Gr. RF (321323)
« Reply #8 on: March 04, 2016, 04:28:05 AM »
 one .323 two cavity brass plain base for bwgdog    :)
« Last Edit: March 04, 2016, 04:29:38 AM by bwgdog »

dromia

  • Administrator
  • Hero Member
  • *****
  • Posts: 3334
  • Sans Peur
    • View Profile
Re: 321 187Gr. RF (321323)
« Reply #9 on: March 04, 2016, 07:59:11 AM »
Hello, I would like one of the aluminum moulds for a .323 base band, plain based bullet.
Thank You.

Regards, Joe Feldman

PS:  Thanks again Frank, for all the leg work.

Number of cavities?

dromia

  • Administrator
  • Hero Member
  • *****
  • Posts: 3334
  • Sans Peur
    • View Profile
Re: 321 187Gr. RF (321323)
« Reply #10 on: March 04, 2016, 08:00:39 AM »
Signed up with Frank on ASSRA for a brass .321 thank you
Number of cavities?

GC? PB?

dromia

  • Administrator
  • Hero Member
  • *****
  • Posts: 3334
  • Sans Peur
    • View Profile
Re: 321 187Gr. RF (321323)
« Reply #11 on: March 04, 2016, 08:01:27 AM »
List updated.

stubbicatt

  • New Member
  • *
  • Posts: 1
  • Noe Guest
    • View Profile
Re: 321 187Gr. RF (321323)
« Reply #12 on: March 04, 2016, 11:54:34 AM »
I want a 2 cavity brass mould in 325. Thanks.

Regards,
Stubb

dromia

  • Administrator
  • Hero Member
  • *****
  • Posts: 3334
  • Sans Peur
    • View Profile
Re: 321 187Gr. RF (321323)
« Reply #13 on: March 04, 2016, 11:58:40 AM »
I want a 2 cavity brass mould in 325. Thanks.

Regards,
Stubb

GC? PB?

uscra112

  • New Member
  • *
  • Posts: 5
  • Noe Guest
    • View Profile
Re: 321 187Gr. RF (321323)
« Reply #14 on: March 04, 2016, 12:46:21 PM »
Confirming that I signed up with Frank on ASSRA site for one mould at .319" and a second at .325".

 



Castpics and Reloader's Reference