Be Sure to visit the store to see whats new

Author Topic: HTC .264 BT-GC bullet.  (Read 1246 times)

KB

  • New Member
  • *
  • Posts: 44
  • Noe Guest
    • View Profile
HTC .264 BT-GC bullet.
« on: August 18, 2017, 07:24:26 PM »


I would like to have a 6.5 mold for a BT and GC HTC bullet at around the 140g, I was thinking of a bullet designed off a scaled down NOE 310-174-SP.BT but with a GC option as well as the BT.
Anybody else need a bullet like that.


KB

475AR10

  • New Member
  • *
  • Posts: 3
  • Noe Guest
    • View Profile
Re: HTC .264 BT-GC bullet.
« Reply #1 on: November 05, 2017, 03:35:56 AM »
I would be interested, got a drawing? I also would not mind a scaled down version of the 309414.
« Last Edit: November 05, 2017, 04:07:10 AM by 475AR10 »

KB

  • New Member
  • *
  • Posts: 44
  • Noe Guest
    • View Profile
Re: HTC .264 BT-GC bullet.
« Reply #2 on: November 06, 2017, 06:47:04 AM »
Would need advice about what could be cut and what cannot be, can we have a SP or a very small flat nose,maybe someone can jump in and let us know what can be done,
KB

rsterne

  • Sr. Member
  • ****
  • Posts: 485
  • Addicted Airgunner
    • View Profile
Re: HTC .264 BT-GC bullet.
« Reply #3 on: November 06, 2017, 04:10:58 PM »
I see no listing for the 310-174-SP.BT bullet you quoted.... can you provide a link or a drawing?.... Scaling that bullet down to 6.5mm would result in a weight of only about 110-115 gr....

Bob
« Last Edit: November 06, 2017, 04:13:00 PM by rsterne »

KB

  • New Member
  • *
  • Posts: 44
  • Noe Guest
    • View Profile
Re: HTC .264 BT-GC bullet.
« Reply #4 on: November 07, 2017, 06:24:10 PM »
Basically the bullet would be .264 smooth sided with a 1 inch radicus nose finishing with a small round point and either beveled or gas checked base and around the 140 grains,
Can anybody draw that up for a look see,
KB

KB

  • New Member
  • *
  • Posts: 44
  • Noe Guest
    • View Profile
Re: HTC .264 BT-GC bullet.
« Reply #5 on: November 07, 2017, 06:29:10 PM »
Here is the bullet I was referring to, would need to be modified to be close to the above dimensions .
KB

Dr-Greg

  • 1000 Dollar Club
  • New Member
  • *
  • Posts: 31
  • Noe Guest
    • View Profile
Re: HTC .264 BT-GC bullet.
« Reply #6 on: August 28, 2018, 09:19:58 PM »
I logged in to the forum today specifically so I could make a post about wanting this same exact bullet, but before I did, I searched the past posts and found this :)

This needs to be done. Come on, why are the 6.5 options on the NOE site so lacking given the extreme popularity of this diameter? I have tons of 308-312 stuff, but there are no good 6.5 options and this HTC BT design re-drawn for the 6.5 would be a fantastic addition.

My target would be to use this for 6.5 PRC, but obviously a lot of guys would want it for Creedmoor too.

mike c.

  • New Member
  • *
  • Posts: 12
  • Noe Guest
    • View Profile
Re: HTC .264 BT-GC bullet.
« Reply #7 on: September 10, 2018, 09:35:31 PM »
I would love 266-126-FN

cornmastah

  • Administrator
  • Hero Member
  • *****
  • Posts: 1386
  • Collector
    • View Profile
Re: HTC .264 BT-GC bullet.
« Reply #8 on: September 13, 2018, 03:19:49 PM »
let's start with this and modify it to what we want it to be (keep in mind we can have the options of bt, gc, or pb):


Dr-Greg

  • 1000 Dollar Club
  • New Member
  • *
  • Posts: 31
  • Noe Guest
    • View Profile
Re: HTC .264 BT-GC bullet.
« Reply #9 on: September 21, 2018, 01:43:00 AM »
I'd like to try a BT and a PB

cornmastah

  • Administrator
  • Hero Member
  • *****
  • Posts: 1386
  • Collector
    • View Profile
Re: HTC .264 BT-GC bullet.
« Reply #10 on: September 21, 2018, 01:58:21 PM »
Any modifications you'd like to see on the bullet?
I'd like to try a BT and a PB

Dr-Greg

  • 1000 Dollar Club
  • New Member
  • *
  • Posts: 31
  • Noe Guest
    • View Profile
Re: HTC .264 BT-GC bullet.
« Reply #11 on: September 22, 2018, 03:35:44 PM »
Basically just going for as similar to this as we can, but in 6.5


cornmastah

  • Administrator
  • Hero Member
  • *****
  • Posts: 1386
  • Collector
    • View Profile
Re: HTC .264 BT-GC bullet.
« Reply #12 on: October 04, 2018, 06:26:20 PM »
Basically just going for as similar to this as we can, but in 6.5

I can't keep the same proportions as a .30 cal bullet and still get the weight to 140gr.  I kept the nose length about the same and extended the body to get about 135gr.  What dimensions would you like me to change from the drawing I posted above?

Dr-Greg

  • 1000 Dollar Club
  • New Member
  • *
  • Posts: 31
  • Noe Guest
    • View Profile
Re: HTC .264 BT-GC bullet.
« Reply #13 on: October 05, 2018, 11:37:01 PM »
For the PB version, that looks fine (is that a little bump where the ogive meets the shank? The 30 cal version seems to have a more smooth rounded transition)

Other than that, and a boat tail version and I'd pass the ball back to any others interested in this Buy.

mike c.

  • New Member
  • *
  • Posts: 12
  • Noe Guest
    • View Profile
Re: HTC .264 BT-GC bullet.
« Reply #14 on: October 10, 2018, 09:36:11 PM »
how about HTC 266-6.5 with a gas check

 



Castpics and Reloader's Reference