Be Sure to visit the store to see whats new

Author Topic: Sizing Die Bushings  (Read 869 times)

rsterne

  • Hero Member
  • *****
  • Posts: 567
  • Addicted Airgunner
    • View Profile
Sizing Die Bushings
« on: December 19, 2018, 04:46:24 PM »
How about adding any body or nose (please specify) sizing die bushings you need, either out of stock or new ones you need, to this thread?....

I need a 0.171" and a 0.170" body bushing.... I also need a 0.283" and a 0.282"....

Bob
« Last Edit: January 13, 2019, 02:55:44 AM by rsterne »

teemu

  • 1000 Dollar Club
  • Hero Member
  • *
  • Posts: 565
  • Airgunner/Mold hoarder
    • View Profile
Re: Sizing Die Bushings
« Reply #1 on: December 19, 2018, 05:31:36 PM »
IRC on "old forum" was list of body and nose dies which was needed.... can't find that topic anymore...

rsterne

  • Hero Member
  • *****
  • Posts: 567
  • Addicted Airgunner
    • View Profile
Re: Sizing Die Bushings
« Reply #2 on: December 19, 2018, 05:37:39 PM »
I couldn't find it either, despite a search.... NOE did a large run of bushings after that thread, and filled out a lot of the missing inventory, plus added the airgun bushings.... That is why I decided to start a new thread....

I don't need any, but I know there is talk of making bullets for .177 airguns, which could require bushings from 0.174 to 0.179.... I need ones just under bore size for the .172 cal NOE bullets....

Bob
« Last Edit: December 19, 2018, 05:43:36 PM by rsterne »

teemu

  • 1000 Dollar Club
  • Hero Member
  • *
  • Posts: 565
  • Airgunner/Mold hoarder
    • View Profile
Re: Sizing Die Bushings
« Reply #3 on: December 19, 2018, 06:22:07 PM »
Yes and there was new list after that also... I'm quite sure...Well i could use some "wierd" body bushings since my old ideal mold .228 mold drops so much wider that when trying size down .228 body bushing bullet jammed in and needed use hammer and rod to get it off. So if this goes on i could take .229 .230 and .231...

rsterne

  • Hero Member
  • *****
  • Posts: 567
  • Addicted Airgunner
    • View Profile
Re: Sizing Die Bushings
« Reply #4 on: January 31, 2019, 04:36:11 PM »
I just talked to Al, and he plans to run these additional bushings soon and put them in the Store.... If you have any additional requirements, post them NOW....

Bob

Back_Roads

  • New Member
  • *
  • Posts: 2
  • Airgunner
    • View Profile
Re: Sizing Die Bushings
« Reply #5 on: February 09, 2019, 02:14:29 AM »
 I just opened up a .173 3 cavity mold and also sizer. I do have a .172 sizer and I think .171, that I will probably not need now.
 
 Others have mentioned a smaller body die for .217 seems some guns are tighter bore .215 , on my AT Nova Liberty.

teemu

  • 1000 Dollar Club
  • Hero Member
  • *
  • Posts: 565
  • Airgunner/Mold hoarder
    • View Profile
Re: Sizing Die Bushings
« Reply #6 on: February 10, 2019, 03:55:51 PM »

SwedeNelson

  • Administrator
  • Hero Member
  • *****
  • Posts: 1768
  • Bullet maker, maker
    • View Profile
Re: Sizing Die Bushings
« Reply #7 on: February 12, 2019, 12:24:38 AM »
teemu

229 .230 and .231... will see what we can do!
Thanks

Bullet maker, maker
Al Nelson

teemu

  • 1000 Dollar Club
  • Hero Member
  • *
  • Posts: 565
  • Airgunner/Mold hoarder
    • View Profile
Re: Sizing Die Bushings
« Reply #8 on: February 12, 2019, 07:27:27 AM »
Thanks!   Need to check if i missing some others "normal" sizing dies.. Taking all at one shipping then.

Cerebration247

  • New Member
  • *
  • Posts: 1
  • Noe Guest
    • View Profile
Re: Sizing Die Bushings
« Reply #9 on: March 26, 2019, 04:45:45 AM »
New guy here.

Was browsing the website and notice that the sizing die is out of stock and don’t see a .310 body die listed either.

orerancher

  • New Member
  • *
  • Posts: 15
  • Noe Guest
    • View Profile
Re: Sizing Die Bushings
« Reply #10 on: April 10, 2019, 08:54:55 PM »
I could really use a .430 Body Bushing!

 



Castpics and Reloader's Reference