Be Sure to visit the store to see whats new

Author Topic: Any interest in a re-run of this mold? 360-147-RN-AK1  (Read 99957 times)

tmaloy

  • New Member
  • *
  • Posts: 25
  • Noe Guest
    • View Profile
Any interest in a re-run of this mold? 360-147-RN-AK1
« on: June 28, 2019, 06:54:15 AM »
I have the Lee version of this mold, and would love to have a aluminum 5 cavity in this mold for both .357 and 9mm for subsonic use.  Any interest in a re-run of this one?  Mainly the a 5 cavity. My gripe with the Lee is the softer alloy of Lee molds in aluminum.  An NOE version would last forvever.

cornmastah

  • Administrator
  • Hero Member
  • *****
  • Posts: 1511
  • Collector
    • View Profile
Re: Any interest in a re-run of this mold? 360-147-RN-AK1
« Reply #1 on: August 09, 2019, 11:49:46 AM »
I think a round nose 147 gr would be a great idea.  Grooved or grooveless?

tmaloy

  • New Member
  • *
  • Posts: 25
  • Noe Guest
    • View Profile
Re: Any interest in a re-run of this mold? 360-147-RN-AK1
« Reply #2 on: August 12, 2019, 03:44:14 AM »
Personally, I would like the lube groove on there since I go back and forth with lubes and powder coating.  Also keeping the crimp groove on there.  Any chance convincing Al to get this one going again?
« Last Edit: August 12, 2019, 03:54:10 AM by tmaloy »

AlvinYork

  • Sr. Member
  • ****
  • Posts: 457
  • Heroic slinger of lead balls
    • View Profile
Re: Any interest in a re-run of this mold? 360-147-RN-AK1
« Reply #3 on: August 14, 2019, 06:00:15 AM »
I have the Lee TL version of this which I use but I would love to have an NOE edition. I'll take whatever gets made but my "I want" would be a brass RG4 GC and an aluminum 5 cav. PB. GC on the brass because I picked up a 350 Legend barrel and I've been looking for a bullet to use with it and I think this would be perfect.

cornmastah

  • Administrator
  • Hero Member
  • *****
  • Posts: 1511
  • Collector
    • View Profile
Re: Any interest in a re-run of this mold? 360-147-RN-AK1
« Reply #4 on: August 14, 2019, 08:44:09 AM »
The legend cartridge usually uses longer truncated cone shaped bullets due to the rib in the magazines.  A lot of the traditional bullet shapes don't work particularly well with the legend.  It would be cool to maybe draw up a new bullet design for the legend in particular.

I have the Lee TL version of this which I use but I would love to have an NOE edition. I'll take whatever gets made but my "I want" would be a brass RG4 GC and an aluminum 5 cav. PB. GC on the brass because I picked up a 350 Legend barrel and I've been looking for a bullet to use with it and I think this would be perfect.

AlvinYork

  • Sr. Member
  • ****
  • Posts: 457
  • Heroic slinger of lead balls
    • View Profile
Re: Any interest in a re-run of this mold? 360-147-RN-AK1
« Reply #5 on: August 15, 2019, 01:26:37 AM »
That's something I'd certainly be interested in. Let's start a new thread, though, so we don't hijack this fellow's discussion.

tmaloy

  • New Member
  • *
  • Posts: 25
  • Noe Guest
    • View Profile
Re: Any interest in a re-run of this mold? 360-147-RN-AK1
« Reply #6 on: August 15, 2019, 09:57:18 PM »
AlvinYork, thanks for the interest in the re-run, too late, you said you want a 5 cav.   ;)  Still I would like to see it run again.  I don't plan on going with 350 Legend so a new thread for it would be beneficial and maybe what others are looking for.  I don't think there are molds being designed for it yet.  Maybe a clone of the RCBS 9mm 147 556 .359 with a gas check would be a good starting point.  Hijacking the thread I started, but if it helps!
« Last Edit: August 15, 2019, 10:06:28 PM by tmaloy »

AlvinYork

  • Sr. Member
  • ****
  • Posts: 457
  • Heroic slinger of lead balls
    • View Profile
Re: Any interest in a re-run of this mold? 360-147-RN-AK1
« Reply #7 on: August 16, 2019, 10:04:39 AM »
Yup, I'm in for this one. The 350 Legend one sounds good too!

AlvinYork

  • Sr. Member
  • ****
  • Posts: 457
  • Heroic slinger of lead balls
    • View Profile
Re: Any interest in a re-run of this mold? 360-147-RN-AK1
« Reply #8 on: August 16, 2019, 12:48:36 PM »
I was poking around the store and it looks like they have these, just in the 363 diameter not the 360. Would that fit your bill, tmaloy?

tmaloy

  • New Member
  • *
  • Posts: 25
  • Noe Guest
    • View Profile
Re: Any interest in a re-run of this mold? 360-147-RN-AK1
« Reply #9 on: August 17, 2019, 09:22:01 AM »
Thanks, but the mold description specifies it for use in the .38 S&W.  More for European designed guns with larger bores.  The nose may be to much to chamber in my 9mm.  Also, I don't think I would try and force them down with my sizer dies and maybe damage my sizer in the process.  I am hoping Al may consider a small run.
« Last Edit: August 17, 2019, 09:44:01 AM by tmaloy »

AlvinYork

  • Sr. Member
  • ****
  • Posts: 457
  • Heroic slinger of lead balls
    • View Profile
Re: Any interest in a re-run of this mold? 360-147-RN-AK1
« Reply #10 on: August 22, 2019, 06:05:43 AM »
Just wanted to post that a new thread has been created to track the 350 Legend bullet - http://noebulletmolds.com/smf/index.php/topic,2867.0.html

tmaloy

  • New Member
  • *
  • Posts: 25
  • Noe Guest
    • View Profile
Re: Any interest in a re-run of this mold? 360-147-RN-AK1
« Reply #11 on: August 28, 2019, 02:54:27 AM »
So gents, anyone interested in a re-run?

cornmastah

  • Administrator
  • Hero Member
  • *****
  • Posts: 1511
  • Collector
    • View Profile
Re: Any interest in a re-run of this mold? 360-147-RN-AK1
« Reply #12 on: September 04, 2019, 09:42:05 AM »
Al is running this now.  Should have it listed in the inventory the next couple days.

tmaloy

  • New Member
  • *
  • Posts: 25
  • Noe Guest
    • View Profile
Re: Any interest in a re-run of this mold? 360-147-RN-AK1
« Reply #13 on: September 08, 2019, 10:50:34 PM »
Thanks for the heads up on this one.  Got the 5 cavity.  Thanks to all!

 



Castpics and Reloader's Reference