NOE Forums

Group Buys: => Archived Buys => Topic started by: SwedeNelson on December 27, 2015, 01:27:59 PM

Title: 432-277-SWC (KEITH) -51- GB264
Post by: SwedeNelson on December 27, 2015, 01:27:59 PM
NOE 432-277-SWC (KEITH)
 
Last call

(http://noebulletmolds.com/photos/albums/430-277-SWC-KEITH-/432-277-SWC_-PB-_277_gr_Sketch.Jpg)

(http://noebulletmolds.com/photos/albums/430-277-SWC-KEITH-/N.O.E._Bullet_Moulds_432-277-SWC_-PB-_277_gr_Sketch.Jpg)

(http://noebulletmolds.com/photos/albums/430-277-SWC-KEITH-/N.O.E._Bullet_Moulds_432-265-HP_-PB-_265_gr_Sketch.Jpg)

(http://noebulletmolds.com/photos/albums/430-277-SWC-KEITH-/N.O.E._Bullet_Moulds_432-254-SWC_-HB-_254_gr_Sketch.Jpg)

Will offer this one .432 or .434 - assume size to be .432 if not listed.
Will assume mould blocks will be Aluminum if not requested as Brass.

We will be running 2 cavity, 2 cavity Brass, 3 cavity, 4 cavity, 4 cavity Brass, 5 cavity, RG2 and RG4
Aluminum and Brass, PB Only.
 We will offer a Hollow Base RG2 cavity, RG4 cavity moulds only.
 
We offer Blank RG pins on our website for you that like to make your own.
Top punch, wrenches and sprue lube are extras now if you want them

Prices will be our standard website prices ( www.noebulletmoulds.com (http://www.noebulletmoulds.com) )
2 cavity $79.00
2 cavity Brass $101.00
3 cavity $86.00
4 cavity $92.00
4 cavity Brass $114.00
5 cavity $99.00
RG2 cavity (HP or HB) $103.00
RG2 cavity Brass (HP or HB) $125.00
RG4 cavity (HP or HB) $133.00
RG4 cavity Brass (HP or HB) $155.00

Lyman/RCBS style Top Punch $5.00
Saeco style Top Punch $7.50
Mould Wrenches / Sprue Lube $2.50
RG2 blank pin set $4.50
RG4 blank pin set $9.00

Will run this as soon as we get10 signed up and we get the tooling in.
Will have them listed on our website as a inventory item as soon as we have them ran
So you can use Pay-Pal, Credit Card or Check / Money order
Post a "I want" and receive a 15% discount  off the website
We will PM a discount code for you to use at check out

If you have question - Visit our website or PM me

Thanks
Swede Nelson
Title: Re: 432-277-SWC (KEITH) -0- GB000
Post by: SwedeNelson on December 27, 2015, 01:29:02 PM
List of orders
1 dkf 4 cavity aluminium .434"
2 Jac43 RG4 aluminum HP .434"
3 david 5 cavity aluminium
4 david RG4 brass HP
5 k7sparky RG4 brass HP
6 FN in MT 4 cavity brass .434"
7 Nueces RG4 brass HB .434"
8 Beagle333 5 cavity aluminium .434"
9 Johnny_Cyclone RG2 brass HB
10 Dutch4122 5 cavity aluminum
11 k7sparky RG4 brass HB
12 dromia RG4 aluminium HP
13 3584ELK 5 cavity aluminum .434"
14 tja6435 5 cavity aluminium .434"
15 hporter 3 cavity aluminium
16 Rat44 2 cavity aluminium
17 Neuces RG4 brass HB
18 Ken Yerian RG2 aluminium HP
19 smbrj  RG4 aluminium HB
20 gman5 4 cavity aluminium
21 Ka0811 2 cavity aluminium
22 jaydub in wi 4 cavity aluminium
23 putnro01 RG2 aluminium HP
24 Jim Betush RG2 aluminium HB .434"
25 Redwoode RG4 brass HB
26 376Steyr RG4 aluminium HB .432"
27 Onkel RG2 aluminum HB .432"
28 Mal Paso 5 cavity aluminium .432"
29 loc n load RG4 brass HP .432"
30 PassCDN 4 cavity aluminium .432"
31 FLYCUTTER RG4 aluminium HP .432"
32 Ryan 5 cavity aluminium .432"
33 clum553946 3 cavity aluminium .432"
34 Fanofthefortyone 4 cavity brass HP .432"
35 Square Butte  RG2 HB aluminium
36 couesbro 4 cavity aluminium .434"
37 M99SavNut  4 cavity brass .432"
38 katylane 4 cavity brass
39 Minerat RG2 HP brass
40 FN in MT  5 cavity aluminium
41 superdan 3 cavity aluminium .432"
42 GAhunter 4 cavity Brass
43 Inspector-Callahan 4 cavity brass
44 Rrogers  RG2 HP Brass .432"
45 Don Purcell RG2 HB aluminium .432"
46 Don Purcell RG2 HP aluminium .432"
47 Zeus77 5 cavity PB aluminium .432"
48 goodalloy 2 cavity brass
49 PassCDN RG2 HP aluminium .432"
50 RedHawk357Mag 4 cavity brass .432"
51 k7sparky 5 cavity aluminium .432"


Thanks for the orders
Bullet maker, maker
Al Nelson
Title: Re: 432-277-SWC (KEITH) -0- GB000
Post by: dkf on December 27, 2015, 02:38:53 PM
I'll take a .434 4 cavity Aluminum Solid
Title: Re: 432-277-SWC (KEITH) -0- GB000
Post by: Jac43 on December 27, 2015, 04:01:43 PM
I'll take a .434" RG2 aluminum HP.
Title: Re: 432-277-SWC (KEITH) -0- GB000
Post by: david on December 27, 2015, 04:14:26 PM
A 5 cavity and a brass RG4 hollow point also a Lyman/RCBS top punch please. Both at .432 dia.
Title: Re: 432-277-SWC (KEITH) -0- GB000
Post by: k7sparky on December 27, 2015, 05:04:01 PM
I'm in for RG4 brass HP
RCBS nose punch
Title: Re: 432-277-SWC (KEITH) -0- GB000
Post by: FN in MT on December 27, 2015, 05:16:19 PM
 I'd like a .434"  4 cavity, brass, solid nose.

 FN in MT
Title: Re: 432-277-SWC (KEITH) -0- GB000
Post by: Nueces on December 27, 2015, 06:17:29 PM
I want a: RG4 cavity Brass HB (hollow base), 0.434

What fun!
Title: Re: 432-277-SWC (KEITH) -0- GB000
Post by: Beagle333 on December 27, 2015, 06:39:52 PM
I want a .434 5-cav PB please!  ;D
Title: Re: 432-277-SWC (KEITH) -0- GB000
Post by: Johnny_Cyclone on December 27, 2015, 07:57:06 PM
"I Want"

Qty.1 - RG2 cavity Brass (HB)
Title: Re: 432-277-SWC (KEITH) -0- GB000
Post by: dromia on December 28, 2015, 04:31:32 AM
List updated.
Title: Re: 432-277-SWC (KEITH) -0- GB000
Post by: Dutch4122 on December 28, 2015, 06:41:36 AM
I would like:

5 cavity aluminum  /  plain based  /  .432" diameter

Thanks!!! 8)
Title: Re: 432-277-SWC (KEITH) -0- GB000
Post by: k7sparky on December 28, 2015, 09:02:09 AM
I'm in for
RG4 brass HB also
Title: Re: 432-277-SWC (KEITH) -0- GB000
Post by: dromia on December 28, 2015, 09:11:40 AM
List updated.

Al notified.
Title: Re: 432-277-SWC (KEITH) -0- GB000
Post by: 3584ELK on December 28, 2015, 10:38:55 AM
Please add me to the list for a .434" 277 gr. Keith mould in 5 cavity aluminum  PB with Lyman/ RCBS top punch.
Title: Re: 432-277-SWC (KEITH) -0- GB000
Post by: dromia on December 28, 2015, 11:25:59 AM
List updated.
Title: Re: 432-277-SWC (KEITH) -13- GB264
Post by: tja6435 on December 29, 2015, 08:56:51 AM
I'll take a 5 cavity .434"
Title: Re: 432-277-SWC (KEITH) -13- GB264
Post by: Jac43 on December 29, 2015, 11:50:45 AM
Would you please change my order from an RG2 to an RG4? All else the same, thanks!
Title: Re: 432-277-SWC (KEITH) -13- GB264
Post by: dromia on December 30, 2015, 01:03:22 AM
List updated.
Title: Re: 432-277-SWC (KEITH) -13- GB264
Post by: SwedeNelson on December 30, 2015, 06:49:19 AM
Tooling is in the works

Bullet maker, maker
Al Nelson
Title: Re: 432-277-SWC (KEITH) -13- GB264
Post by: hporter on December 30, 2015, 07:52:26 AM
I would like a 3 cavity aluminum solid nose plain base please.
Title: Re: 432-277-SWC (KEITH) -13- GB264
Post by: dromia on December 30, 2015, 09:16:08 AM
List updated.
Title: Re: 432-277-SWC (KEITH) -13- GB264
Post by: Rat44 on December 30, 2015, 10:41:31 AM
I would like a 2 cavity alum, solid nose .432 please.

Thanks!
-Scott
Title: Re: 432-277-SWC (KEITH) -13- GB264
Post by: dromia on December 30, 2015, 11:05:49 AM
List updated.
Title: Re: 432-277-SWC (KEITH) -13- GB264
Post by: Nueces on December 30, 2015, 09:57:50 PM
I want another one, an RG4 brass HB .432"

That makes two for me, 432 and 434, both RG4 HB (hollow base)
Title: Re: 432-277-SWC (KEITH) -13- GB264
Post by: dromia on December 31, 2015, 12:50:15 AM
List updated.
Title: Re: 432-277-SWC (KEITH) -13- GB264
Post by: Ken Yerian on December 31, 2015, 06:52:08 AM
Please put me down for a RG2 HP 432 Aluminum
Title: Re: 432-277-SWC (KEITH) -17- GB264
Post by: dromia on December 31, 2015, 08:11:43 AM
List updated.
Title: Re: 432-277-SWC (KEITH) -18- GB264
Post by: smbrj on January 10, 2016, 11:53:40 AM
I'll take a RG4 HB Aluminum

Mike
Title: Re: 432-277-SWC (KEITH) -18- GB264
Post by: dromia on January 11, 2016, 01:16:14 AM
List updated.
Title: Re: 432-277-SWC (KEITH) -18- GB264
Post by: gman51 on January 12, 2016, 02:38:55 PM
Put me in for a 4 cavity aluminum for one of these also. Thanks!
Title: Re: 432-277-SWC (KEITH) -18- GB264
Post by: gman51 on January 12, 2016, 06:01:33 PM
Forgot to mention .432
Title: Re: 432-277-SWC (KEITH) -18- GB264
Post by: dromia on January 13, 2016, 12:52:56 AM
List updated.
Title: Re: 432-277-SWC (KEITH) -20- GB264
Post by: Ka0811 on January 15, 2016, 03:12:34 PM
Hi. I would like a 2 cav aluminum at .434 thanks
Title: Re: 432-277-SWC (KEITH) -20- GB264
Post by: dromia on January 16, 2016, 01:08:01 AM
List updated.
Title: Re: 432-277-SWC (KEITH) -21- GB264
Post by: jaydub in wi on January 19, 2016, 12:33:20 AM
I would like a 4 cavity Pb aluminum 432 please
Title: Re: 432-277-SWC (KEITH) -21- GB264
Post by: dromia on January 19, 2016, 02:32:17 AM
List updated.
Title: Re: 432-277-SWC (KEITH) -22- GB264 2/5/16
Post by: putnro01 on January 22, 2016, 11:53:06 AM
I want:
RG2 (HP), Alum, .432
Title: Re: 432-277-SWC (KEITH) -22- GB264 2/5/16
Post by: dromia on January 23, 2016, 06:13:58 AM
List updated.
Title: Re: 432-277-SWC (KEITH) -23- GB264 2/5/16
Post by: Jim Betush on January 26, 2016, 03:58:19 PM
I'll take a .434" RG2 aluminum HB
Title: Re: 432-277-SWC (KEITH) -23- GB264 2/5/16
Post by: Redwoode on January 26, 2016, 08:58:57 PM
I'll take a .432 RG4 brass HB please
Title: Re: 432-277-SWC (KEITH) -23- GB264 2/5/16
Post by: dromia on January 27, 2016, 03:30:24 AM
List updated.
Title: Re: 432-277-SWC (KEITH) -25- GB264 2/5/16
Post by: Ka0811 on January 27, 2016, 05:50:43 PM
If I could do a correction I meant I want .432 not .434. So  would be a 2 cav aluminum in .432 thanks
Title: Re: 432-277-SWC (KEITH) -25- GB264 2/5/16
Post by: dromia on January 28, 2016, 02:10:13 AM
Updated.
Title: Re: 432-277-SWC (KEITH) -25- GB264 "ON HOLD"
Post by: dkf on February 05, 2016, 08:12:54 AM
Please change mine from a 3 cav to a 4 cavity. I'm #1 on the list.
Title: Re: 432-277-SWC (KEITH) -25- GB264 "ON HOLD"
Post by: 376Steyr on February 05, 2016, 08:45:13 AM
.432 Aluminum RG4 Hollow Base.  Thanks!
Title: Re: 432-277-SWC (KEITH) -25- GB264 "ON HOLD"
Post by: dromia on February 05, 2016, 10:55:45 AM
List updated.
Title: Re: 432-277-SWC (KEITH) -25- GB264 "ON HOLD"
Post by: Onkel on February 05, 2016, 11:12:40 AM
Please put me up for an RG2 aluminum HB .432 (w/rcbs top punch),

Onkel
Title: Re: 432-277-SWC (KEITH) -26- GB264 "ON HOLD"
Post by: dromia on February 06, 2016, 12:46:06 AM
List updated.
Title: Re: 432-277-SWC (KEITH) -27- GB264 "2/29"
Post by: Mal Paso on February 25, 2016, 07:24:39 AM
OK I give up.

5 cavity aluminum .432"

please
Title: Re: 432-277-SWC (KEITH) -27- GB264 "2/29"
Post by: dromia on February 25, 2016, 08:01:07 AM
List updated.
Title: Re: 432-277-SWC (KEITH) -27- GB264 "2/29"
Post by: Jac43 on February 25, 2016, 09:11:51 PM
I'm new to group buys here and didn't see this in the FAQ...Since there are a few days between production runs is there any possibility you can hold aside each Keith mold requested and ship them in one package when finished?
Title: Re: 432-277-SWC (KEITH) -27- GB264 "2/29"
Post by: k7sparky on February 26, 2016, 06:00:40 AM
"Posted by: Jac43
I'm new to group buys here and didn't see this in the FAQ...Since there are a few days between production runs is there any possibility you can hold aside each Keith mold requested and ship them in one package when finished?"

Easy to do! :)
When you get the PM / email with your discount code order as you normally would and check out.
During check out you can pick something like "Send a Check / MO" as the payment option
When all your GB mould orders are complete email or call NOE for a shipping total or I think you can give a CC over the phone at that time

One last note: these GBs got BIG so it will take some time to get all the parts assembled and ready.  DON'T PANIC! :'(
It may be awhile before you get your Discount PM.  A week or more?
Title: Re: 432-277-SWC (KEITH) -27- GB264 "2/29"
Post by: loc n load on February 27, 2016, 06:22:05 AM
I want a four cavity brass with RCBS / lyman top punch.
Title: Re: 432-277-SWC (KEITH) -27- GB264 "2/29"
Post by: dromia on February 27, 2016, 06:36:28 AM
List updated.
Title: Re: 432-277-SWC (KEITH) -27- GB264 "2/29"
Post by: PassCDN on February 27, 2016, 10:38:24 AM
432-277 -SWC       4 cavity aluminum with RCBS top punch please
Title: Re: 432-277-SWC (KEITH) -27- GB264 "2/29"
Post by: dromia on February 27, 2016, 11:05:24 AM
List updated.
Title: Re: 432-277-SWC (KEITH) -27- GB264 "2/29"
Post by: FLYCUTTER on February 27, 2016, 06:37:47 PM
I would like a RG4 HP,432-265 aluminum. Thank you.
Title: Re: 432-277-SWC (KEITH) -27- GB264 "2/29"
Post by: dromia on February 28, 2016, 02:22:10 AM
List updated.
Title: Re: 432-277-SWC (KEITH) -27- GB264 "2/29"
Post by: Ryan on February 29, 2016, 06:41:33 AM
.432 5 cavity aluminum, please!

Thanks,
Ryan
Title: Re: 432-277-SWC (KEITH) -27- GB264 "2/29"
Post by: loc n load on February 29, 2016, 11:10:01 AM
After speaking with Al on the phone I want to change my order on reply #53 to the following:
I want a four cavity brass RG 4 HP with top punch for RCBS / Lyman. Please scrub the order on #53 and replace it with this. Thank you.
Title: Re: 432-277-SWC (KEITH) -27- GB264 "2/29"
Post by: clum553946 on February 29, 2016, 12:51:53 PM
I'd like a 3 cavity aluminum .432 please
Title: Re: 432-277-SWC (KEITH) -27- GB264 "2/29"
Post by: SwedeNelson on February 29, 2016, 01:17:54 PM
Get your orders in!
Things are back and moving.

Bullet maker, maker
Al Nelson
Title: Re: 432-277-SWC (KEITH) -27- GB264 "2/29"
Post by: Fanofthefortyone on February 29, 2016, 03:49:30 PM
I want a 4 cavity, brass, HP PB
Ronnie
Title: Re: 432-277-SWC (KEITH) -27- GB264 "2/29"
Post by: dromia on March 01, 2016, 08:21:51 AM
List updated.
Title: Re: 432-277-SWC (KEITH) -27- GB264 "2/29"
Post by: Square Butte on March 02, 2016, 10:19:15 AM
One RG2 - HB - .432 - Aluminum
Title: Re: 432-277-SWC (KEITH) -27- GB264 "2/29"
Post by: dromia on March 02, 2016, 10:23:45 AM
List updated.
Title: Re: 432-277-SWC (KEITH) -27- GB264 "2/29"
Post by: couesbro on March 03, 2016, 10:07:01 AM
I want:

4 cavity $92.00 Al.  .434 Solid nose.
Title: Re: 432-277-SWC (KEITH) -27- GB264 "2/29"
Post by: dromia on March 03, 2016, 10:33:52 AM
List updated.
Title: Re: 432-277-SWC (KEITH) -27- GB264 "2/29"
Post by: M99SavNut on March 03, 2016, 12:40:08 PM
I'd like a 4-cavity, brass, solid point .432, w/ Lyman top punch.

Thanks,
Jess
Title: Re: 432-277-SWC (KEITH) -27- GB264 "2/29"
Post by: Onkel on March 03, 2016, 01:04:26 PM
Which blank RG pins will fit the HB?
Title: Re: 432-277-SWC (KEITH) -27- GB264 "2/29"
Post by: katylane on March 03, 2016, 07:54:58 PM
I would like a 4 cavity brass .432 with lyman
Top punch
Title: Re: 432-277-SWC (KEITH) -27- GB264 "2/29"
Post by: dromia on March 04, 2016, 01:05:29 AM
List updated.
Title: Re: 432-277-SWC (KEITH) -27- GB264 "2/29"
Post by: Zeus77 on March 04, 2016, 03:09:14 AM
"I WANT" to get in on this one for my 18" barreled Turkish Mauser 98 .444 Marlin and Taurus 8-3/4 barrel 44 Mag.  I will take a Aluminum, RG-4 Gas Check, Hollow Point, drilled for probe with both a Lyman Top and SAECO punch, .432 dia..  Thanks in advance!  Zeus
Title: Re: 432-277-SWC (KEITH) -27- GB264 "2/29"
Post by: dromia on March 04, 2016, 03:55:41 AM
"I WANT" to get in on this one for my 18" barreled Turkish Mauser 98 .444 Marlin and Taurus 8-3/4 barrel 44 Mag.  I will take a Aluminum, RG-4 Gas Check, Hollow Point, drilled for probe with both a Lyman Top and SAECO punch, .432 dia..  Thanks in advance!  Zeus

This is plain base only as per the original post.
Title: Re: 432-277-SWC (KEITH) -27- GB264 "2/29"
Post by: Zeus77 on March 04, 2016, 04:33:21 PM
Quote from: dromia link=topic=1300.msg12690#msg12690 date=14570889

This is plain base only as per the original post.
[/quote

Oops....you are right. I thought I saw gas check but it must have been wishful thinking.  I see now that it is indeed PB only.  I will have to pass on this one. My 444 velocities are to high to be without one.  Thanks again and good luck.  Zeus
Title: Re: 432-277-SWC (KEITH) -27- GB264 "2/29"
Post by: Minerat on March 04, 2016, 07:24:20 PM
I want a  RG2 brass HP .432".
and a RCBS nose punch.

Minerat
Title: Re: 432-277-SWC (KEITH) -27- GB264 "2/29"
Post by: FN in MT on March 04, 2016, 08:14:23 PM
 If it's not too late to get in on this...In addition to the 4 cavity I'm already down for...

  I Want;  a  5 cavity, Aluminum, .432" plain base.

FN in MT
Title: Re: 432-277-SWC (KEITH) -27- GB264 "2/29"
Post by: dromia on March 04, 2016, 10:51:26 PM
List updated.
Title: Re: 432-277-SWC (KEITH) -27- GB264 "2/29"
Post by: k7sparky on March 05, 2016, 06:22:22 AM
Quote from: dromia link=topic=1300.msg12690#msg12690 date=14570889

This is plain base only as per the original post.
[/quote

Oops....you are right. I thought I saw gas check but it must have been wishful thinking.  I see now that it is indeed PB only.  I will have to pass on this one. My 444 velocities are to high to be without one.  Thanks again and good luck.  Zeus

Take a look at Patmarlins PB checkmakers.  Punch beer cans and form checks for PB.  That's my plan and I'm sticking to it ;)
Title: Re: 432-277-SWC (KEITH) -27- GB264 "2/29"
Post by: wheelgun on March 05, 2016, 01:28:08 PM
I want a RG2 HP Aluminum .432
Thanks
Title: Re: 432-277-SWC (KEITH) -27- GB264 "2/29"
Post by: dromia on March 05, 2016, 01:46:54 PM
List updated.
Title: Re: 432-277-SWC (KEITH) -27- GB264 "2/29"
Post by: GAhunter on March 07, 2016, 12:40:42 AM
4 cavity Brass please
Title: Re: 432-277-SWC (KEITH) -27- GB264 "2/29"
Post by: dromia on March 07, 2016, 02:32:19 AM
List updated.
Title: Re: 432-277-SWC (KEITH) -42- GB264 "2/29"
Post by: Inspector-Callahan on March 09, 2016, 05:44:19 AM
"I want" a 4 cavity brass @ 432

Thanks.
Title: Re: 432-277-SWC (KEITH) -42- GB264 "2/29"
Post by: dromia on March 09, 2016, 06:18:21 AM
List updated.
Title: Re: 432-277-SWC (KEITH) -42- GB264 "2/29"
Post by: Rrogers on March 15, 2016, 09:23:21 PM
I want.
.432, RG2, HP, Brass
Title: Re: 432-277-SWC (KEITH) -42- GB264 "2/29"
Post by: dromia on March 16, 2016, 03:34:09 AM
List updated.
Title: Re: 432-277-SWC (KEITH) -42- GB264 "2/29"
Post by: Don Purcell on March 17, 2016, 11:58:29 AM
"I want" an RG2 .432-265-HP (PB) Aluminum
Title: Re: 432-277-SWC (KEITH) -42- GB264 "2/29"
Post by: Don Purcell on March 17, 2016, 12:03:14 PM
"I want" an .432-254-SWC (HB) Aluminum
Title: Re: 432-277-SWC (KEITH) -42- GB264 "2/29"
Post by: dromia on March 17, 2016, 12:17:11 PM
"I want" an .432-254-SWC (HB) Aluminum

Number of cavities?
Title: Re: 432-277-SWC (KEITH) -42- GB264 "2/29"
Post by: Don Purcell on March 17, 2016, 04:46:31 PM
Sorry, two cavities
Title: Re: 432-277-SWC (KEITH) -42- GB264 "2/29"
Post by: Don Purcell on March 17, 2016, 04:53:37 PM
This would be the RG2 Hollow point 264 grain
Title: Re: 432-277-SWC (KEITH) -42- GB264 "2/29"
Post by: dromia on March 18, 2016, 03:32:15 AM
List updated.
Title: Re: 432-277-SWC (KEITH) -42- GB264 "2/29"
Post by: Rrogers on March 19, 2016, 12:20:26 PM
Could I also add a Lyman top punch?  Thanks.
Title: Re: 432-277-SWC (KEITH) -42- GB264 "2/29"
Post by: Don Purcell on March 21, 2016, 10:09:05 AM
Hi Al, on page 6 I have listed an RG2 .432 Keith Hollowpoint Aluminum but see it has not been added to the update list, please do. Thanks Don
Title: Re: 432-277-SWC (KEITH) -42- GB264 "2/29"
Post by: dromia on March 21, 2016, 03:19:59 PM
Hi Al, on page 6 I have listed an RG2 .432 Keith Hollowpoint Aluminum but see it has not been added to the update list, please do. Thanks Don

Page 6? I don't have a page 6 for this thread.

Post numbers are better.

I added you to the list on the 18th for an RG2 HP aluminium do you now require a second mould?

Please clarify what you are on about.

Title: Re: 432-277-SWC (KEITH) -42- GB264 "2/29"
Post by: Don Purcell on March 21, 2016, 08:07:40 PM
Hi Al, Reply #88 is for RG2 .432 Keith Hollowpoint Aluminum
        Reply #89 is for RG2 .432 Keith Hollowbase Aluminum
Just two molds. Sorry for the confusion hopefully I got in right this time.
Title: Re: 432-277-SWC (KEITH) -42- GB264 "2/29"
Post by: dromia on March 22, 2016, 12:14:50 AM
List updated.
Title: Re: 432-277-SWC (KEITH) -42- GB264 "2/29"
Post by: PassCDN on March 23, 2016, 07:02:03 PM
Please add a second mould to my order:

RG2 Aluminum HP  .432
Title: Re: 432-277-SWC (KEITH) -42- GB264 "2/29"
Post by: Zeus77 on March 23, 2016, 07:52:13 PM
I guess I can't resist after all EVEN if no gas check is available ;D.

Dromia, put me down for a 5 cavity, PB, Aluminum, SWC solid, .432 diameter mold.  Add the following options; Drilled for probe, both Lyman and SAECO top punches and sprue plate lube.  I'm going to give it a try with one of Pat's PB check makers on my .444 Marlin. Should be great on my Super Redhawk too!

One question; How long is it expected to be before this is "on the mill"?  It's been dangling in front of me too long and now, "I Want" this one
Title: Re: 432-277-SWC (KEITH) -42- GB264 "2/29"
Post by: goodalloy on March 23, 2016, 10:39:07 PM
I want  brass 2 cavity
Title: Re: 432-277-SWC (KEITH) -42- GB264 "2/29"
Post by: dromia on March 24, 2016, 12:53:48 AM
List updated.
Title: Re: 432-277-SWC (KEITH) -42- GB264 "2/29"
Post by: PassCDN on March 26, 2016, 06:21:53 AM

Please add to the list my order for a second mould 432 277 SWC

mould #1   post # 55    4 cavity aluminum .432  with RCBS top punch

mould #2    post #99   RG2  aluminum .432    hollow point

I am confirming I want two moulds in total
Title: Re: 432-277-SWC (KEITH) -42- GB264 "2/29"
Post by: dromia on March 28, 2016, 12:51:40 AM
List updated.
Title: Re: 432-277-SWC (KEITH) -42- GB264 "2/29"
Post by: RedHawk357Mag on March 28, 2016, 06:18:34 AM
Please add me to the list.   Brass four cavity.  . 432"  thank you.
Title: Re: 432-277-SWC (KEITH) -42- GB264 "2/29"
Post by: dromia on March 28, 2016, 08:12:45 AM
List updated.
Title: Re: 432-277-SWC (KEITH) -42- GB264 "2/29"
Post by: Jac43 on March 28, 2016, 02:51:17 PM
This GB was supposed to run a few days after the 41 cal buy. Now here we are looking at April. This is the first time I've felt that 41 shooters had the advantage over the 44 shooters haha.
Title: Re: 432-277-SWC (KEITH) -42- GB264 "2/29"
Post by: Dutch4122 on March 28, 2016, 04:18:25 PM
This GB was supposed to run a few days after the 41 cal buy. Now here we are looking at April. This is the first time I've felt that 41 shooters had the advantage over the 44 shooters haha.

That's ok this one will be well worth the wait! ;D
Title: Re: 432-277-SWC (KEITH) -42- GB264 "2/29"
Post by: superdan on March 29, 2016, 11:23:27 AM
I would like a 3 cavity Aluminum PB Solid .432 dia. mold please.
Title: Re: 432-277-SWC (KEITH) -42- GB264 "2/29"
Post by: dromia on March 29, 2016, 11:57:47 AM
List updated.
Title: Re: 432-277-SWC (KEITH) -42- GB264 "2/29"
Post by: dromia on April 03, 2016, 11:10:59 PM
Updated.
Title: Re: 432-277-SWC (KEITH) -42- GB264 "2/29"
Post by: k7sparky on April 05, 2016, 07:31:05 PM
Just can't stand it any longer  ;D

Put me in for a 5 Al also  8)
Title: Re: 432-277-SWC (KEITH) -42- GB264 "2/29"
Post by: dromia on April 05, 2016, 11:54:26 PM
List updated.
Title: Re: 432-277-SWC (KEITH) -42- GB264 "2/29"
Post by: SwedeNelson on April 06, 2016, 06:44:09 AM
Closed
On the Mill Next

Thanks to all that ordered and it on its way

Bullet maker, maker
Al Nelson
Title: Re: 432-277-SWC (KEITH) -42- GB264 "2/29"
Post by: Ken Yerian on April 15, 2016, 07:56:22 AM
Are these ready to buy yet? I wiped out all of my messages and haven't got any new ones yet. I might have deleted the discount code for this buy by mistake.
Could you send it to me again please ? I'm really looking forward to this mold.
Title: Re: 432-277-SWC (KEITH) -42- GB264 "2/29"
Post by: k7sparky on April 15, 2016, 08:59:06 AM
I talked with Al yesterday and he said they should be back from the engraver late next week if all goes well.

You didn't erase your code for these.  Think they have to assemble after they come back from engraver so the PM is still a ways off
Title: Re: 432-277-SWC (KEITH) -42- GB264 "2/29"
Post by: Ken Yerian on April 16, 2016, 04:01:34 AM
Thank you. Don't want to miss on this one.
Title: Re: 432-277-SWC (KEITH) -42- GB264 "2/29"
Post by: k7sparky on May 04, 2016, 04:38:20 AM
GB PMs are out :)