NOE Forums

Group Buys: => Archived Buys => : SwedeNelson December 27, 2015, 01:37:29 PM

: 454-276-SWC (KEITH) -47- GB265
: SwedeNelson December 27, 2015, 01:37:29 PM
NOE 454-276-SWC (KEITH)
 
On the Mill

(http://noebulletmolds.com/photos/albums/454-276-SWC-KEITH-/454-276-SWC_-PB-_276_gr_Sketch.Jpg)

(http://noebulletmolds.com/photos/albums/454-276-SWC-KEITH-/N.O.E._Bullet_Moulds_454-276-SWC_-PB-_276_gr_Sketch.Jpg)

(http://noebulletmolds.com/photos/albums/454-276-SWC-KEITH-/N.O.E._Bullet_Moulds_454-262-HP_-PB-_262_gr_Sketch.Jpg)

(http://noebulletmolds.com/photos/albums/454-276-SWC-KEITH-/N.O.E._Bullet_Moulds_454-250-SWC_-HB-_250_gr_Sketch.Jpg)

Will assume mould blocks will be Aluminum if not requested as Brass.

We will be running 2 cavity, 2 cavity Brass, 3 cavity, 4 cavity, 4 cavity Brass, 5 cavity, RG2 and RG4
Aluminum and Brass, PB Only.
 We will offer a Hollow Base RG2 cavity, RG4 cavity moulds only.
 
We offer Blank RG pins on our website for you that like to make your own.
Top punch, wrenches and sprue lube are extras now if you want them

Prices will be our standard website prices ( www.noebulletmoulds.com (http://www.noebulletmoulds.com) )
2 cavity $79.00
2 cavity Brass $101.00
3 cavity $86.00
4 cavity $92.00
4 cavity Brass $114.00
5 cavity $99.00
RG2 cavity (HP or HB) $103.00
RG2 cavity Brass (HP or HB) $125.00
RG4 cavity (HP or HB) $133.00
RG4 cavity Brass (HP or HB) $155.00

Lyman/RCBS style Top Punch $5.00
Saeco style Top Punch $7.50
Mould Wrenches / Sprue Lube $2.50
RG2 blank pin set $4.50
RG4 blank pin set $9.00

Will run this as soon as we get10 signed up and we get the tooling in.
Will have them listed on our website as a inventory item as soon as we have them ran
So you can use Pay-Pal, Credit Card or Check / Money order
Post a "I want" and receive a 15% discount  off the website
We will PM a discount code for you to use at check out

If you have question - Visit our website or PM me

Thanks
Swede Nelson
: Re: 454-276-SWC (KEITH) -47- GB265
: SwedeNelson December 27, 2015, 01:38:24 PM
List of orders
1 david 5 cavity aluminium
2 david RG4 HP brass
3 k7sparky RG4 brass HP
4 k7sparky RG4 brass HB
5 Nueces RG4 brass HB
6 Johnny_Cyclone RG2 Brass HB
7 AggiePharmD 4 cavity aluminium
8 dromia RG4 aluminium HP
9 Cowboy_Dan RG2 aluminium HB
10 Czech_too 4 cavity aluminium
11 Minerat RG-4 brass HP
12 Baconstrips RG4 aluminum HP
13 5shot  2 cavity brass
14 Barnowl RG4 aluminium HB
15 hporter 3 cavity aluminium
16 Greg 2 cavity brass
17 Irascible 2 cavity brass
18 Beagle333 5 cavity aluminium
19 gman51 4 cavity aluminium
20 Galoot RG2 brass HB
21 jaydub in wi 4 cavity aluminium
22 Djones 4 cavity brass
23 Wheelgun RG2 aluminium HP
24 Mr Hanssen RG2 aluminium HB
25 Bangbangman RG4 brass HP
26 carbine86 RG4 brass HP
27 Keith W 5 cavity aluminium
28 ringo10X RG4 aluminium HP
29 loc n load RG4 brass HP
30 clum553946 3 cavity aluminium
31 Fanofthefortyone RG4 brass, HP
32 alamogunr 3 cavity aluminium
33 M99SavNut 2 cavity brass
34 GAhunter 4 cavity brass
35 Don Purcell RG2 HP aluminium
36 Rick45Colt RG4 brass HP
37 goodalloy 2 cavity brass
38 noisewaterphd 4 cavity brass
39 k7sparky 5 cavity aluminium
40 buffalorunner RG2 aluminium HP
41 rhjeepdriver RG4 HP aluminium
42 Barnowl RG4 HP aluminium
43 41 mag RG4  HP aluminium
44 goddalloy 4 cavity brass
45 fjruple RG2 HB brass
46 376Steyr RG4 HB aluminium
47 lablover 2 cavity PB aluminium

Thanks for the orders
Bullet maker, maker
Al Nelson
: Re: 454-276-SWC (KEITH) -0- GB000
: david s December 27, 2015, 04:15:59 PM
A 5 cavity and a brass RG4 hollow point also a Lyman/RCBS top punch please.
: Re: 454-276-SWC (KEITH) -0- GB000
: k7sparky December 27, 2015, 05:02:57 PM
I'm in for
RG4 brass HP
RG4 brass HB
RCBS nose punch
: Re: 454-276-SWC (KEITH) -0- GB000
: Greg December 27, 2015, 05:43:00 PM
Al

I want a 454-276 SWC in brass RG-2

kratzner (at) charter (dot) net
: Re: 454-276-SWC (KEITH) -0- GB000
: Nueces December 27, 2015, 06:16:05 PM
I want a:  RG4 cavity Brass HB (hollow base)

Fellas, this could be the berries for all those Brit 455s.
: Re: 454-276-SWC (KEITH) -0- GB000
: Johnny_Cyclone December 27, 2015, 07:54:49 PM
"I Want"

Qty.1 - RG2 cavity Brass (HB)
: Re: 454-276-SWC (KEITH) -0- GB000
: AggiePharmD December 27, 2015, 08:33:05 PM
I want a 4-cavity aluminum PB with a RCBS/Lyman top punch please.
: Re: 454-276-SWC (KEITH) -0- GB000
: dromia December 28, 2015, 04:02:13 AM
Al

I want a 454-276 SWC in brass RG-2

kratzner (at) charter (dot) net

HP or HB?
: Re: 454-276-SWC (KEITH) -0- GB000
: dromia December 28, 2015, 04:02:57 AM
List updated.
: Re: 454-276-SWC (KEITH) -0- GB000
: Minerat December 28, 2015, 07:59:02 AM
I want a 454-276 SWC HP in brass RG-4 with a RCBS top punch. Please

Thanks Steve. (Minerat)

SteveOB at outdrs dot net
: Re: 454-276-SWC (KEITH) -0- GB000
: k7sparky December 28, 2015, 09:00:27 AM
I want a 454-276 SWC in brass RG-4 with a RCBS top punch. Please

Thanks Steve. (Minerat)

SteveOB at outdrs dot net

HP or HB?
: Re: 454-276-SWC (KEITH) -0- GB000
: dromia December 28, 2015, 09:12:34 AM
I want a 454-276 SWC in brass RG-4 with a RCBS top punch. Please

Thanks Steve. (Minerat)

SteveOB at outdrs dot net

HB or HP?
: Re: 454-276-SWC (KEITH) -8- GB000
: Cowboy_Dan December 28, 2015, 01:56:36 PM
I'm in for an RG2 in hollow base.  Aluminum please.
: Re: 454-276-SWC (KEITH) -8- GB000
: dromia December 28, 2015, 02:05:09 PM
List updated.
: Re: 454-276-SWC (KEITH) -8- GB265
: Czech_too December 29, 2015, 12:41:04 AM
I'll go for the 454-276-SWC in a 4 cav. aluminum
: Re: 454-276-SWC (KEITH) -8- GB265
: dromia December 29, 2015, 03:34:23 AM
List updated.

Al notified.
: Re: 454-276-SWC (KEITH) -0- GB000
: Minerat December 29, 2015, 10:55:04 AM
I want a 454-276 SWC in brass RG-4 with a RCBS top punch. Please

Thanks Steve. (Minerat)

SteveOB at outdrs dot net

HB or HP?

HP   Please. I fixed the OP too.
: Re: 454-276-SWC (KEITH) -8- GB265
: BaconStrips December 29, 2015, 12:45:13 PM
I'm in for a RG4 aluminum HP please.
: Re: 454-276-SWC (KEITH) -8- GB265
: 5shot December 29, 2015, 07:15:28 PM
"I want" a 4 cavity please
: Re: 454-276-SWC (KEITH) -8- GB265
: Barnowl December 29, 2015, 08:45:08 PM
I would like:  RG4  HB

Thank you
: Re: 454-276-SWC (KEITH) -8- GB265
: dromia December 30, 2015, 12:41:46 AM
List updated.
: Re: 454-276-SWC (KEITH) -8- GB265
: SwedeNelson December 30, 2015, 06:54:04 AM
Tooling is in the works

Bullet maker, maker
Al Nelson
: Re: 454-276-SWC (KEITH) -8- GB265
: hporter December 30, 2015, 07:53:38 AM
I would like a 3 cavity aluminum solid nose plain base please.
: Re: 454-276-SWC (KEITH) -8- GB265
: dromia December 30, 2015, 09:12:15 AM
List updated.
: Re: 454-276-SWC (KEITH) -8- GB265
: Rick45Colt December 30, 2015, 10:36:35 AM
I would like a 454-265-HP but I would like to also pour FP also. Do I need 2 molds?

4 cavities aluminum
: Re: 454-276-SWC (KEITH) -8- GB265
: dromia December 30, 2015, 11:08:38 AM
No.

Number of cavities?

Brass, aluminium?
: Re: 454-276-SWC (KEITH) -8- GB265
: Greg December 30, 2015, 12:55:54 PM
dromia -

please change my selection to

2 cavity Solid in Brass

sorry for the confusion
: Re: 454-276-SWC (KEITH) -8- GB265
: dromia December 30, 2015, 01:29:03 PM
List updated.
: Re: 454-276-SWC (KEITH) -16- GB265
: Irascible January 05, 2016, 11:50:44 AM
I WANT 2 cavity brass. NO HP or HB
: Re: 454-276-SWC (KEITH) -16- GB265
: dromia January 06, 2016, 12:07:54 AM
List updated.
: Re: 454-276-SWC (KEITH) -16- GB265
: Beagle333 January 07, 2016, 07:57:59 PM
5 cav aluminum, please!  ;D ;D
: Re: 454-276-SWC (KEITH) -16- GB265
: dromia January 08, 2016, 01:36:39 AM
List updated.
: Re: 454-276-SWC (KEITH) -16- GB265
: reed1911 January 09, 2016, 08:23:36 AM
Got mine in, could not wait, heated 'er up and started dropping like rain, even with the deep pins. GREAT work gents top notch quality as always.

Edit: AND....I'm an idiot. Did not read the thread fully and my comments were in ref. to the 273WC mold...need more coffee
: Re: 454-276-SWC (KEITH) -16- GB265
: k7sparky January 09, 2016, 08:49:02 AM
Got mine in, could not wait, heated 'er up and started dropping like rain, even with the deep pins. GREAT work gents top notch quality as always.

Wonder which mould you are referring to?

Your experience mirrors mine with RGs  Swear that they work better without smoking.  I do run 4 heat cycles prior to starting to cast.  The last 2 moulds used Dromia's idea of putting the lube on pins and spruce plate / mould top after the first cycle.  The first one gets the moisture out from cleaning with scrubbing bubbles.
: Re: 454-276-SWC (KEITH) -16- GB265
: gman51 January 12, 2016, 02:38:04 PM
Put me in for a 4 cavity aluminum please. thanks!
: Re: 454-276-SWC (KEITH) -16- GB265
: dromia January 13, 2016, 12:54:20 AM
List updated.
: Re: 454-276-SWC (KEITH) -19- GB265
: Galoot January 13, 2016, 06:37:37 PM
Hi,

I want an RG2 454-250 SWC Hollow Base in Brass.

Thanks,
Alan
: Re: 454-276-SWC (KEITH) -19- GB265
: dromia January 14, 2016, 01:33:10 AM
List updated.
: Re: 454-276-SWC (KEITH) -20- GB265
: jaydub in wi January 19, 2016, 12:31:54 AM
I would like a 4 cavity PB aluminum please
: Re: 454-276-SWC (KEITH) -20- GB265
: dromia January 19, 2016, 02:33:33 AM
List updated.
: Re: 454-276-SWC (KEITH) -21- GB265 2/8/16
: 5shot January 21, 2016, 10:11:02 AM
Any idea when this mold will run?  Not in a rush, just trying to budget my fun $$$$.
: Re: 454-276-SWC (KEITH) -21- GB265 2/8/16
: SwedeNelson January 21, 2016, 11:02:13 AM
5shot

Added the estimated run date to the title:

"454-276-SWC (KEITH) -21- GB265 2/8/16"

Hope this helps
Bullet maker, maker
Al Nelson
: Re: 454-276-SWC (KEITH) -21- GB265 2/8/16
: 5shot January 21, 2016, 11:16:23 AM
Thanks
: Re: 454-276-SWC (KEITH) -21- GB265 2/8/16
: Djones January 24, 2016, 12:58:38 PM
Put me in for a brass 4 cavity plain base.

NOE 454-276-SWC (KEITH)

Thanks David Jones
: Re: 454-276-SWC (KEITH) -21- GB265 2/8/16
: dromia January 24, 2016, 01:08:24 PM
List updated.
: Re: 454-276-SWC (KEITH) -21- GB265 2/8/16
: Djones January 24, 2016, 08:54:38 PM
List updated.

Dromia,

Is Brass available?  I originally asked for a brass mold but I am listed for an aluminum mold.

Thanks,

David
: Re: 454-276-SWC (KEITH) -22- GB265 2/8/16
: wheelgun January 29, 2016, 07:06:27 PM
I'd like an Aluminum RG2 HP w/ Extra set of pins.

Thanks
: Re: 454-276-SWC (KEITH) -22- GB265 2/8/16
: dromia January 30, 2016, 02:13:48 AM
List updated.
: Re: 454-276-SWC (KEITH) -22- GB265 "ON HOLD"
: SwedeNelson January 30, 2016, 08:27:49 AM
All NEW Group Buys are "ON HOLD".
Our tool grinder is down and we cant get new form tools.
We are looking at other makers and avenues to work this out.
This is only a delay and we will get it resolved as soon as we can.

Sorry for the inconvenience
Bullet maker, maker
Al Nelson
: Re: 454-276-SWC (KEITH) -22- GB265 "ON HOLD"
: Beagle333 January 30, 2016, 10:14:38 AM
Stuff breaks, it's going to happen with any machinery sooner or later. Thanks for the update!!!  It only builds the anticipation!  ;D ;D
: Re: 454-276-SWC (KEITH) -22- GB265 "ON HOLD"
: Mr Hanssen February 03, 2016, 11:20:30 AM
I'm in for an RG2 in hollow base,with a RCBS top punch please.
: Re: 454-276-SWC (KEITH) -22- GB265 "ON HOLD"
: dromia February 03, 2016, 12:01:10 PM
List updated.
: Re: 454-276-SWC (KEITH) -24- GB265 "ON HOLD"
: Bangbangman February 05, 2016, 10:12:36 PM
RG4 Brass HP please.
: Re: 454-276-SWC (KEITH) -24- GB265 "ON HOLD"
: dromia February 06, 2016, 12:44:44 AM
List updated.
: Re: 454-276-SWC (KEITH) -24- GB265 "ON HOLD"
: carbine86 February 10, 2016, 02:02:37 PM
"I want" 4 cav brass hp
: Re: 454-276-SWC (KEITH) -24- GB265 "ON HOLD"
: dromia February 10, 2016, 11:39:24 PM
List updated.
: Re: 454-276-SWC (KEITH) -26- GB265 "3/2"
: dromia February 24, 2016, 11:20:12 PM
Updated.
: Re: 454-276-SWC (KEITH) -26- GB265 "3/2"
: Keith W February 25, 2016, 12:11:33 PM
I would like an aluminum 5 cavity and also a Lyman/RCBS top punch please.
: Re: 454-276-SWC (KEITH) -26- GB265 "3/2"
: dromia February 25, 2016, 12:27:23 PM
List updated.
: Re: 454-276-SWC (KEITH) -26- GB265 "3/2"
: ringo10x February 25, 2016, 05:57:21 PM
I want a 4 cav, HP, alum, with all pins & extras
: Re: 454-276-SWC (KEITH) -26- GB265 "3/2"
: dromia February 26, 2016, 01:51:04 AM
List updated.
: Re: 454-276-SWC (KEITH) -26- GB265 "3/2"
: loc n load February 27, 2016, 06:17:31 AM
I want a 4 cavity brass and a top punch RCBS/Lyman
: Re: 454-276-SWC (KEITH) -26- GB265 "3/2"
: dromia February 27, 2016, 06:38:36 AM
List updated.
: Re: 454-276-SWC (KEITH) -26- GB265 "3/2"
: loc n load February 29, 2016, 11:03:29 AM
  After speaking to Al on the phone, I want to change my original order on reply #62 to:
I want a 4 cavity brass RG 4 HP mold with rcbs/lyman top punch.....please scrub order in reply #62 and replace with this instead. Thank you.
: Re: 454-276-SWC (KEITH) -26- GB265 "3/2"
: clum553946 February 29, 2016, 12:53:15 PM
I'd like a three cavity aluminum .454 please
: Re: 454-276-SWC (KEITH) -26- GB265 "3/2"
: SwedeNelson February 29, 2016, 01:17:19 PM
Get your orders in!
Things are back and moving.

Bullet maker, maker
Al Nelson
: Re: 454-276-SWC (KEITH) -26- GB265 "3/2"
: Fanofthefortyone February 29, 2016, 03:47:45 PM
I want a 4 cavity, brass, HP PB
Ronnie
: Re: 454-276-SWC (KEITH) -26- GB265 "3/2"
: dromia March 01, 2016, 08:26:11 AM
List updated.
: Re: 454-276-SWC (KEITH) -26- GB265 "3/2"
: alamogunr March 01, 2016, 10:53:16 AM
I want a 3 cavity w/lyman, RCBS top punch
: Re: 454-276-SWC (KEITH) -26- GB265 "3/2"
: dromia March 01, 2016, 12:50:52 PM
List updated.
: Re: 454-276-SWC (KEITH) -26- GB265 "3/2"
: M99SavNut March 03, 2016, 04:19:46 PM
I would like to order a 2-cavity brass mold, flat nose and plain base, with a Lyman/RCBS top punch, and drilled for a probe.

Thanks,

Jess
: Re: 454-276-SWC (KEITH) -26- GB265 "3/2"
: dromia March 04, 2016, 01:09:40 AM
List updated.
: Re: 454-276-SWC (KEITH) -26- GB265 "3/2"
: GAhunter March 07, 2016, 12:37:19 AM
4 cavity Brass please
: Re: 454-276-SWC (KEITH) -26- GB265 "3/2"
: dromia March 07, 2016, 02:33:29 AM
List updated.
: Re: 454-276-SWC (KEITH) -34- GB265 "3/2"
: Don Purcell March 17, 2016, 12:05:20 PM
"I want" an 454-262-HP (PB) Aluminum
: Re: 454-276-SWC (KEITH) -34- GB265 "3/2"
: dromia March 17, 2016, 12:16:24 PM
"I want" an 454-262-HP (PB) Aluminum

Number of cavities?
: Re: 454-276-SWC (KEITH) -34- GB265 "3/2"
: Don Purcell March 17, 2016, 04:47:57 PM
Two cavity
: Re: 454-276-SWC (KEITH) -34- GB265 "3/2"
: Don Purcell March 17, 2016, 04:54:56 PM
This would be the RG2 Hollow point
: Re: 454-276-SWC (KEITH) -34- GB265 "3/2"
: dromia March 18, 2016, 03:30:24 AM
List updated.
: Re: 454-276-SWC (KEITH) -34- GB265 "3/2"
: Rick45Colt March 19, 2016, 11:23:55 AM
I think I originally posted that I want an Aluminum 4 Cavity HP version but I changed my mind I would like a Brass 4 Cavity HP instead.
: Re: 454-276-SWC (KEITH) -34- GB265 "3/2"
: dromia March 19, 2016, 11:47:06 AM
List updated.
: Re: 454-276-SWC (KEITH) -34- GB265 "3/2"
: goodalloy March 23, 2016, 10:39:42 PM
I want brass 2 cavity
: Re: 454-276-SWC (KEITH) -34- GB265 "3/2"
: dromia March 24, 2016, 12:52:30 AM
List updated.
: Re: 454-276-SWC (KEITH) -34- GB265 "3/2"
: noisewaterphd March 29, 2016, 11:12:23 PM
I'll take an Aluminum 5 cavity.
: Re: 454-276-SWC (KEITH) -34- GB265 "3/2"
: dromia March 29, 2016, 11:42:37 PM
List update.
: Re: 454-276-SWC (KEITH) -34- GB265 "3/2"
: noisewaterphd March 30, 2016, 12:39:33 PM
I have changed my mind. I want a brass 4 cavity instead please.
: Re: 454-276-SWC (KEITH) -34- GB265 "3/2"
: dromia March 30, 2016, 11:44:36 PM
Updated.
: Re: 454-276-SWC (KEITH) -34- GB265 "3/2"
: k7sparky April 06, 2016, 09:22:10 AM
In the I STILL can't stand it any longer category :o

Add a 5 cavity Al  ;)
: Re: 454-276-SWC (KEITH) -34- GB265 "3/2"
: dromia April 06, 2016, 10:48:42 AM
List updated.
: Re: 454-276-SWC (KEITH) -34- GB265 "3/2"
: 5shot April 12, 2016, 10:34:29 PM
Do we have any idea of when the PM's might be going out?
: Re: 454-276-SWC (KEITH) -34- GB265 "3/2"
: buffalorunner April 17, 2016, 04:12:35 PM
I would take a 2 cav. PB RG2
: Re: 454-276-SWC (KEITH) -34- GB265 "3/2"
: buffalorunner April 17, 2016, 04:31:36 PM
Sorry I was not clear in my last post. I would like an RG2, HP, PB, alum.
: Re: 454-276-SWC (KEITH) -34- GB265 "3/2"
: noisewaterphd April 17, 2016, 11:12:01 PM
Totally forgot to mention that I need a Saeco top punch for this!
: Re: 454-276-SWC (KEITH) -34- GB265 "3/2"
: dromia April 17, 2016, 11:45:05 PM
List updated.
: Re: 454-276-SWC (KEITH) -34- GB265 "3/2"
: rhjeepdriver April 19, 2016, 04:16:42 AM
"I want" RG4 HP aluminum. Thanks.
: Re: 454-276-SWC (KEITH) -34- GB265 "3/2"
: dromia April 19, 2016, 11:53:20 PM
List updated.
: Re: 454-276-SWC (KEITH) -34- GB265 "3/2"
: Barnowl April 20, 2016, 01:06:15 PM
I would like a second mould please:  RG4  HP

Thank you, Barnowl
: Re: 454-276-SWC (KEITH) -34- GB265 "3/2"
: dromia April 20, 2016, 11:57:46 PM
I would like a second mould please:  RG4  HP

Thank you, Barnowl

Brass? Aluminium?
: Re: 454-276-SWC (KEITH) -34- GB265 "3/2"
: Barnowl April 24, 2016, 09:16:29 AM
I would like a second mould please:  RG4  HP

Thank you, Barnowl

Brass? Aluminium?

Aluminum please
: Re: 454-276-SWC (KEITH) -34- GB265 "3/2"
: dromia April 24, 2016, 09:35:32 AM
List updated.
: Re: 454-276-SWC (KEITH) -34- GB265 "3/2"
: 41 mag April 28, 2016, 04:30:19 PM
If I'm not too late, throw me in for the following,

1ea. - RG4 cavity Brass (HP) Aluminum
1ea. - RG4 blank pin set

Thanks
: Re: 454-276-SWC (KEITH) -34- GB265 "3/2"
: Djones April 28, 2016, 06:13:07 PM
If I'm not too late, throw me in for the following,

1ea. - RG4 cavity Brass (HP) Aluminum
1ea. - RG4 blank pin set

Thanks

Oh buddy. You need to let them know aluminum or brass. I'm confused by the post
: Re: 454-276-SWC (KEITH) -34- GB265 "3/2"
: dromia April 29, 2016, 12:36:04 AM
If I'm not too late, throw me in for the following,

1ea. - RG4 cavity Brass (HP) Aluminum
1ea. - RG4 blank pin set

Thanks

Can you be a bit more explicit as to what you actually want, the post is ambiguous.
: Re: 454-276-SWC (KEITH) -34- GB265 "3/2"
: 41 mag April 29, 2016, 09:18:33 AM
Sorry was in high gear to go somewhere.

Aluminum block RG4 Cavity mold and extra blank pin set.
: Re: 454-276-SWC (KEITH) -34- GB265 "3/2"
: dromia April 30, 2016, 01:53:27 AM
List updated.
: Re: 454-276-SWC (KEITH) -43- GB265
: goodalloy May 10, 2016, 12:15:24 PM
I want for cavity brass please
: Re: 454-276-SWC (KEITH) -43- GB265
: dromia May 10, 2016, 12:57:16 PM
List updated.
: Re: 454-276-SWC (KEITH) -43- GB265
: dromia May 13, 2016, 04:42:14 AM
Updated.
: Re: 454-276-SWC (KEITH) -43- GB265
: fjruple May 14, 2016, 05:25:21 AM
Sorry, I am late to last call.   I tried posting a second time and received an error message.  I would like to get in on a 454-250-SWC (HB) RG2 HB Brass Mold witha Lyman Top Punch and RG2 Blank Pin set.

Thanks

fjruple
: Re: 454-276-SWC (KEITH) -43- GB265
: dromia May 14, 2016, 07:00:22 AM
You are on the list already as per you PM via Cast Boolits, check the first page.
: Re: 454-276-SWC (KEITH) -43- GB265
: 376Steyr May 14, 2016, 10:37:35 AM
I tried to resist, but I can't.

An RG4 Aluminum Hollow Base for me, please.

Thanks!
: Re: 454-276-SWC (KEITH) -43- GB265
: dromia May 14, 2016, 12:01:09 PM
List updated.
: Re: 454-276-SWC (KEITH) -43- GB265
: lablover May 18, 2016, 05:45:03 AM
 The 454-276-SWC in a 2 cav. aluminum PB please.  How and when do I pay  :)

: Re: 454-276-SWC (KEITH) -47- GB265
: dromia May 18, 2016, 08:48:34 AM
This GB is now closed, look at which forum it is in.

There are usually extras which you can purchase from the NOE web shop.

Al will post here when the moulds are ready, there are plenty of posts as to how the GBs work including a forum on the subject.

: Re: 454-276-SWC (KEITH) -47- GB265
: lablover May 18, 2016, 11:09:18 AM
Yea, I saw what forum it was in..I just a reply on the 14th so was hoping.  Thanks for letting me know about the extras...will keep an eye open
: Re: 454-276-SWC (KEITH) -47- GB265
: k7sparky May 19, 2016, 05:48:03 AM
Yea, I saw what forum it was in..I just a reply on the 14th so was hoping.  Thanks for letting me know about the extras...will keep an eye open
I will be happy to PM you when I get my notification if you want.  Also check the "Notify" box for this thread as there is normally activity as soon as the moulds are ready.

Closed usually means "On the mill"  that should take a week plus then the engraver takes several weeks depending on his work load.

Then it takes time to assemble the pieces.  It will be a bit yet
: Re: 454-276-SWC (KEITH) -47- GB265
: lablover May 20, 2016, 02:55:16 PM
If you could do that...It would be awesome!!  Thanks a Million


Yea, I saw what forum it was in..I just a reply on the 14th so was hoping.  Thanks for letting me know about the extras...will keep an eye open
I will be happy to PM you when I get my notification if you want.  Also check the "Notify" box for this thread as there is normally activity as soon as the moulds are ready.

Closed usually means "On the mill"  that should take a week plus then the engraver takes several weeks depending on his work load.

Then it takes time to assemble the pieces.  It will be a bit yet
: Re: 454-276-SWC (KEITH) -47- GB265
: SwedeNelson June 02, 2016, 02:15:30 PM
Have them listed in the web-store and PM sent with discount code
Thanks to all that ordered

Bullet maker, maker
Al Nelson