The 8mm 326331

  • This topic is empty.
  • Creator
    Topic
  • #487779
    JRR
      Up
      0
      Down
      ::

      245 grains of lead.  Very much like the “caber toss”!

      19 grains of IMR 4759
      WLR standard primers
      converted ’06 brass
      100 yards and a drizzly morning

      upper left and lower right are 10 shots
      upper right is 5 shots
      middle is my 22lr CZ with BRNO peep sights, ELY Club

      Jeff

      21cgy39.jpg

      bg7pnc.jpg

    Viewing 5 replies - 1 through 5 (of 5 total)
    • Author
      Replies
    • #495021
      bjornborud
      Participant
        Up
        0
        Down
        ::

        Man, those are some awesome groups. What kind of rifle are you shooting?

        #495022
        daveridenour
        Participant
          Up
          0
          Down
          ::

          JRR,

          Very impressive! Thanks for posting.

          Dave

          #495023
          christopherdingell
          Participant
            Up
            0
            Down
            ::

            I bought one of this mold to use with my combination gun, but have yet to fire any of them. 

            What were your pressure signs like?  Did you seat the bullets out until they touched the rifling?  Did you crimp them?

            #495024
            JRR
              Up
              0
              Down
              ::

              The main pressure signs were too low.  For several powders in the same category (4759, 4227, n110, etc.) it took at least 19 grns. to give enough pressure to expand the neck enough to preclude excessive sooting of the neck and shoulder area.  Also that powder level was needed to keep the primers flush in their pockets.  I have had best results using charges in the 20-21 gr. range with these powders and this bullet.

              For an even lower velocity but with tremendous accuracy, 13 gr. of 800X was fantastic.

              With this bullet seated with the gas check flush at the bottom of the neck, it was too long for some chambers and throats.  Easy bolt closure with three different mausers occured with the checks approx. 1/3rd of the way into the shoulder.  It hasn’t been a problem so far.  Seat them as long as possible for the least amount of check insertion into the shoulder.

              Jeff

              #495025
              sgt.mike
                Up
                0
                Down
                ::

                Really nice groups and shooting
                the 8mm is a great cartridge. ;)

              Viewing 5 replies - 1 through 5 (of 5 total)
              • You must be logged in to reply to this topic.