Loads for 360 155 WC

Home › Forums › NOE Forums › NOE Archive › Historical Archive › Using NOE Moulds › Favorite loads › Loads for 360 155 WC

  • This topic is empty.
  • Creator
    Topic
  • 2015-04-22 at 02:56 #488006
    dennismarshall
      Up
      0
      Down
      ::

      I have an NMBH and would like to hear what data folks are using for these bullets. I’d like to push them at higher velocity than the normal target loads (e.g., 2.8 – 3.0 grains of Bullseye) — say 900-950 FPS. I have Bullseye, Red Dot, E3 and 2400 powders on hand. Thanks for the recommendations. Barkisiswillin’

    • Creator
      Topic
    Viewing 2 replies - 1 through 2 (of 2 total)
    • Author
      Replies
    • 2015-04-22 at 16:22 #497741
      frankelliott
      Participant
        Up
        0
        Down
        ::

        3.7 – 4.0 gr of B’eye should get you where you want to be.

        Frank

        2015-09-07 at 14:45 #497742
        johnpeacock
        Participant
          Up
          0
          Down
          ::

          From my notes, safe in my gun, Ruger Redhawk. Crimped in crimp groove, bullet scrap, sized  .359″, Randy Ratio green TAC mixed 357 brass. 
          Universal 4.8 grns/1009 fps
          Bullseye 4.8 grns/1124 fps
          CFE Pistol 4.2 grns/836 fps
          HP38 4.6 grns/954
          TiteGroup 3.8 grns/938
          TiteGroup 4.0 grns/960
          Be safe and work up.

        • Author
          Replies
        Viewing 2 replies - 1 through 2 (of 2 total)
        • You must be logged in to reply to this topic.