Pritchett mould question

Home › Forums › NOE Forums › NOE Archive › Historical Archive › General › Forum Questions / Problems › Pritchett mould question

  • This topic is empty.
  • Creator
    Topic
  • #488281
    davidhurst
      Up
      0
      Down
      ::

      Hello,
      I received the .566 Pritchett mould last week, and was surprised to see that the shallow base plug casts a small wt bullet of about 460 grains or so– I was expecting to see a shallow base plug for the standard length bullet shown in the drawing, which would’ve created a heavier bullet that the standard Pritchett with the deep base plug. Perhaps I misunderstood the drawings info, but was really looking forward to shooting a very heavy wt Pritchett with a shallow base cavity.
      Is it possible to get these shallow-base plugs turned down to create the longer, heavier Pritchett? Or buy a new set of base plugs for the longer bullet with a shallow base plug?
      Thanks,
      I’m not certain the short bullet with the shallow base will stabilize in my .577 Enfields, but certainly will give it a try if that is my only option.

    Viewing 8 replies - 1 through 8 (of 8 total)
    • Author
      Replies
    • #500295
      adamsutherland
      Moderator
        Up
        0
        Down
        ::

        Why do you think it won’t stabilise?

        #500296
        davidhurst
          Up
          0
          Down
          ::

          Just a gut feeling–maybe no basis for fact, but other ltwt miniés do not shoot that well in my Enfields/which seem to prefer heavier wt bullets–the big Lyman 575213 PH for example. Am enthusiastic about the longer Pritchett with the standard base plug, btw., even though I’ve not shot it yet. Would still prefer a heavy shallow base bullet for long range shooting…

          #500297
          adamsutherland
          Moderator
            Up
            0
            Down
            ::

            My short lightweight minies do well out to 300yrds.

            We had originally hoped for the adjustable length moulds for these bullets.

            Maybe Al would do a run of long bullet shallow cavity/short bullet deep cavity plugs for us to go with these moulds?

            #500298
            davidhurst
              Up
              0
              Down
              ::

              That was the question of my op–a shallow base plug for the longer bullet.

              #500299
              adamsutherland
              Moderator
                Up
                0
                Down
                ::

                And I was agreeing with you.

                #500300
                davidhurst
                  Up
                  0
                  Down
                  ::

                  That option would be perfect~! Full length Pritchett with a shallow base plug.

                  #500301
                  maillemaker
                    Up
                    0
                    Down
                    ::

                    See my thread here:

                    http://noebulletmolds.com/smf/index.php/topic,1048.0.html

                    With pure lead using the long plug (deepest cavity), my .566 Pritchets are weighing in at about 571 grains when cast using pure lead.

                    This is heavier than the RCBS-500M at 535 grains and the Lyman 575213PH at 525 grains.

                    http://www.n-ssa.net/vbforum/showthread.php/7643-RCBS-500M-Weights?highlight=rcbs-500M

                    http://www.n-ssa.net/vbforum/showthread.php/7629-Lyman-575213PH-weights?highlight=575213PH

                    So the Noe .566 Pritchet is the heaviest bullet I have yet cast.  This is with the longer plug.  With a short plug (shallower cavity) it will be even heavier.

                    I am weighing the Noe bullets using an RCBS Charge Master 1500 scale.  I do not remember if I made the weights on the other bullets with the same or a different scale.

                    Steve

                    #500302
                    adamsutherland
                    Moderator
                      Up
                      0
                      Down
                      ::

                      My long bullet deep cavity are dropping either side of 574gn, a milliput plug sticks another 11gns onto that.

                      The short bullet shallow cavity drops 463 gn bullets, all from lead flashing with a smidgen of tin.

                    Viewing 8 replies - 1 through 8 (of 8 total)
                    • You must be logged in to reply to this topic.