Why are so many molds not in stock

Home › Forums › NOE Forums › NOE Archive › Historical Archive › General › Forum Questions / Problems › Why are so many molds not in stock

  • This topic is empty.
  • Creator
    Topic
  • #488894
    Rooman
      Up
      0
      Down
      ::

      There is something that I do not understand. NOE builds some high quality molds and has some of the best pricing around if not the best pricing for the quality that you get. I have seen the molds and the quality bullets that they drop. But why do so many of NOE molds always have zero’s beside them? Lets take the .308 to .311 molds. There are 448 different types of molds in the .308 to .311 category. Of that, only 259 types have anything for sale. That relates to 42% or 189 types of molds have zero’s beside them. There are 13 types that have nothing for sale and two types that have only one for sale. So I guess my question is what good is it to have 1000 different types of molds for sale if there are only 2 that could be bought? Forgive my ignorance but I just do not get it. I would like to purchase some NOE molds but because the ones that i like always have zeros beside them I have had to turn to Lyman, LEE and RCBS. I would rather buy NOE but you can not buy what is not there. If anyone can help me understand, I would appreciate it. 

    Viewing 14 replies - 1 through 14 (of 14 total)
    • Author
      Replies
    • #505197
      robertpedersen1
        Up
        0
        Down
        ::

        Some of NOE’s business (and, consequently the in-stock quantities) is based upon group buys — getting 5-15 people together that are interested in a particular design, before the production run starts.

        That way, NOE doesn’t have to eat their own shoes if the design is not popular.

        And, historically, NOE’s business was based entirely on the group buy concept. So each bullet was tweaked to the liking of the people in on that particular group buy; and there are some custom designs in the catalog that just don’t get produced very often, due to their initial niche-applications.

        If you want something that you don’t see, tell NOE here in the forum.  Look around.  Read.  You’ll find the correct place.
        Or, start a discussion about a group buy for whatever bullet you’re interested in.

        Instant gratification?  Nope.
        Quality results (and a discount) if you have some patience?  Yep.

        And, again, back to the reading part…
        If you look through the forums and read announcements, etc., you’ll see that there have been a few major setback’s for NOE’s production capabilities over the last year.  They sold a lot of molds that they couldn’t reproduce, so inventory levels got quite low.

        Read.  Dig around.
        Don’t just show up ranting and raving, and asking to be spoon-fed an answer.

        #505198
        adamsutherland
        Moderator
          Up
          0
          Down
          ::

          A search and familiarisation with the forum along with the answer you have already been given will help you understand NOEs modus operandi.

          Understand this and your expectations will then fit the function.

          #505199
          AlvinYork
          Participant
            Up
            0
            Down
            ::

            There was a similar discussion a couple of weeks ago. The link below should get you there

            http://noebulletmolds.com/smf/index.php/topic,1663.msg14957.html#msg14957

            #505200
            Hugh Kuhns
            Participant
              Up
              0
              Down
              ::

              I joined this forum in June 2014 and there were about 500 or so members at that time. It took 4 months for the first group buy I signed up for until I received the new mould. There are about 3000 members at this time. It seems every new member wants something different and I’m sure that it is an impossible task to supply everyone at once. The perfection that everyone expects in a NOE mould takes time. Please be as patient as possible and it will come to pass. If you know anything about Al, it is that he is all about customer service. His problem is that he has 50 things going on and they all need to be done first and that’s not possible.

              762sultan

              #505201
              brigettecuneo
              Participant
                Up
                0
                Down
                ::

                I’m a relatively new NOE customer and also was not aware of how ordering, wish lists and new design molds are handled at first. Understand that some molds are in high demand and folks buy them. Some without lots of interest can be a risk to just sit on the shelf. So rallying the troops interested in a design you want can help your cause.
                NOE has a reputation for quality and also great customer service. We all have to wait our turn sometimes when there are several different types of molds many of us want. There is only so much time in a day and with such a large selection of high end custom molds, you got to expect there to be some down time for what you specifically want.
                I will say, there is lots of information on here to view and get yourself more familiarized with the process. the folks here also, very helpful for someone needing some assistance.
                Al, the owner, always responds to emails or pm’s promply and fairly. He has never done us wrong and always fulfilled his promises to us.
                It’s one of the reasons we like to buy our molds from NOE. There is a different in mold quality and also the reason there is such a loyal following. Be patient and keep checking the store for updates.

                #505202
                Rooman
                  Up
                  0
                  Down
                  ::

                  Thanks everyone for replying to my question. Basically NOE is not a mass producer of molds like LEE, Lyman and RCBS. NOE will only make molds when a certain amount of people want a particular mold so it is worth their time to produce them. Hey if that is what works for NOE, then who am I to criticize how they do things. Guess I will try starting a thread on the mold I would like to have and who knows maybe we can get enough people wanting it to get it produced. Once again, thanks for all your reply’s.

                  PS – SQUIGIE – You had a real good answer until your last sentence. No one was ranting and raving, and asking to be spoon-fed an answer. Unless I am wrong, forums are for asking questions and learning. I ask a very simple question on a matter that I did not understand. I put facts in my question and was just looking for a very simple answer, not sarcasm. And other than your comment, that is exactly what I got. Good simple answers, from some courteous people, that I appreciated. I am 65 years old, been reloading and casting rifle, pistol and shotgun for over 40 years. I have created two 12 gauge slug designs that Tom over at Accurate Molds cut for me (deigns attached) and will soon submit another to him that will be for AA and Remington hulls that will drop in to a shot cup. How many designs have you actually have made. I will have to admit that the two I had made did not work the way I wanted for the simple fact that they were not tapered to fit the shot cup correctly. The next one will be. I actually have 30+ designs that I have been working on. I just do not have the equipment to make them. My point to all of this being that I do not rant and rave and certainly do not need to be spoon fed. I hope I have not hurt your feelings with all this, but the next time you leave an answer for someone, just leave an answer. Hold your sarcasm for someone that deserves it. 

                  Once again everyone, thank you for your replies.

                  #505203
                  robertpedersen1
                    Up
                    0
                    Down
                    ::

                    (…)

                    PS – SQUIGIE – (…) How many designs have you actually have made. (…)

                    I’m sure you expected a different answer, but…

                    I had nine designs in Tom’s catalog at one point in time (in .432″, .459″, and .478″ diameters), ranging from long-range ‘heavyweights’, to ‘hockey puck’/stackable wadcutters, and common things in between.  But he condensed a few designs into each other, since they were fairly similar.  I have no idea how many are still there, since I rarely use Accurate Molds any more.  Tom’s choice of material and lack of stress-relieving often results in mold blocks that are warped from day one (in my experience).

                    I’ve designed about 25 bullets for other people (some of which also found their way into Tom’s catalog).
                    And I have about half a dozen molds of my design from various other custom makers, including the latest from Mountain Molds – a .478″ 403 gr secant flat point that I designed to feed in a semi-auto and perfectly fit a one-off wildcat chamber; and a “.480 Ruger” bullet designed to work decently at revolver cylinder length, but also have a nose design that resists nose shearing (fragmentation and perimeter erosion resulting in a conical point) upon impact at rifle velocities (~1,650-1,890 fps).

                    So… about 40, I’d say.
                    And those are just the designs that either got cut in blocks, or got approval from the person requesting the design.
                    My actual ‘personal catalog’ has about 300-odd designs.

                    I eat, sleep, and breath firearms.  It isn’t just a hobby for me.

                    #505204
                    teemu
                    Participant
                      Up
                      0
                      Down
                      ::

                      Gentleman, Gentleman not doing this for pissing contest. I already reed so many forums where people arguing for nothingt..Thanks. I hope this forum stay out of that problem.

                      Sorry for stickin my nose on case where it probably don’t belong…

                      #505205
                      robertpedersen1
                        Up
                        0
                        Down
                        ::

                        Gentleman, Gentleman not doing this for pissing contest. I already reed so many forums where people arguing for nothingt..Thanks. I hope this forum stay out of that problem.

                        Sorry for stickin my nose on case where it probably don’t belong…

                        There’s no pissing contest here, unless Rooman is competing against himself.
                        I have no desire to argue.  I simply answered his question.

                        #505206
                        SwedeNelson
                        Keymaster
                          Up
                          0
                          Down
                          ::

                          Rooman

                          You have a very valid question.
                          We are trying to build inventor daily as well as keep a good cash flow with group buys.
                          Even with all the holes in what we have on the shelf we are setting on over $500,000.00
                          With that much money tied up its very hard to justify filling every shelf with moulds.
                          Just to cover the 189 30Cal moulds with say 3 each (something worth doing) it would increase
                          our inventory $15.000.00 to $16.000.00.
                          If it would increase sales that much? – not sure

                          I think we are doing about the best we can to keep a balance and the doors open.
                          We are trying every day to better NOE and get all our good customers what they want.
                          And thank’s for being one of them!

                          Bullet maker, maker
                          Al Nelson 

                          #505207
                          Rooman
                            Up
                            0
                            Down
                            ::

                            Hey Swede

                            Thanks for replying to my question. If I look at everything from strictly a business perspective, what you are saying makes perfect sense. Why would you want to tie up a million dollars in molds just so you could say that everything is in stock. And then hope that people buy them and you make your money back. That is completely understandable.

                            Now from a consumer perspective, it is a little frustrating when a person wants a particular mold and has to wait 6 months or so to get it. It is more frustrating when a consumer does not understand why a mold is not available. So hopefully through this discussion, this will help others, as well as myself, to understand the who, what, when, where and why of how you do business and the logic used to determine which molds are to be ran and when. Of how the forums can be used to possibly expedite the run of a certain mold. The more knowledge that people have of the process of your business, the easier it is to have patience. Knowledge is a good thing. 

                            Once again Swede, thanks for your reply.

                            #505208
                            AlvinYork
                            Participant
                              Up
                              0
                              Down
                              ::

                              In the spirit of helping others avoid frustration,  etc, I would add that when a mould you are looking for is in stock, buy it! Because one never knows when it will come around to the mill again. If you hold off too long they will all be gone and you will curse yourself for not buying it when they were there.

                              #505209
                              robertpedersen1
                                Up
                                0
                                Down
                                ::

                                In the spirit of helping others avoid frustration,  etc, I would add that when a mould you are looking for is in stock, buy it! Because one never knows when it will come around to the mill again. If you hold off too long they will all be gone and you will curse yourself for not buying it when they were there.

                                Indeed.
                                And the more unusual the design, the more likely it is for the mold to not be run again for a while (possibly years).

                                #505210
                                Intel6
                                Participant
                                  Up
                                  0
                                  Down
                                  ::

                                  In the spirit of helping others avoid frustration,  etc, I would add that when a mould you are looking for is in stock, buy it! Because one never knows when it will come around to the mill again. If you hold off too long they will all be gone and you will curse yourself for not buying it when they were there.

                                  Indeed.
                                  And the more unusual the design, the more likely it is for the mold to not be run again for a while (possibly years).

                                  That is why when some of the more odd moulds get done I figure I need to get one because everyone who wants one will get it on the initial buy and Al may never have enough demand to cut them again. I have a few moulds that I have bought and haven’t even used yet but wanted enough to buy and put on the shelf for later.

                                  Neal in AZ

                                Viewing 14 replies - 1 through 14 (of 14 total)
                                • You must be logged in to reply to this topic.