360-232-rf

Home › Forums › NOE Forums › NOE Archive › Historical Archive › Using NOE Moulds › Casting and Reloading › 360-232-rf

  • This topic is empty.
  • Creator
    Topic
  • 2019-11-04 at 03:03 #490013
    lamar larsen
    Participant
      Up
      0
      Down
      ::

      Well dang Just received the 360-232-rf.
      Cleaned it heat treated it and cast today.
      Got good bullets almost right away.
      Powder coated with clear, loaded ten AND
      they only feed from one side of the mag.
      left side feeds to low and they hit the bottom of the barrel.
      Savage 110 blind mag.

      I have another project a 35 Whelen IMP on a Mauser.
      Maybe that will feed with a little work.
      That project just made the priority list.

      LaMar

    • Creator
      Topic
    Viewing 4 replies - 1 through 4 (of 4 total)
    • Author
      Replies
    • 2020-12-06 at 05:48 #512010
      lamar larsen
      Participant
        Up
        0
        Down
        ::

        Just an update.

        I did not chamfer the back of the chamber when I put this together.
        Got it chamfered and now feeds like greased lightning.

        2020-12-11 at 16:09 #512011
        Mike B.
        Moderator
          Up
          0
          Down
          ::

          This cast bullet design tends to need a longer freebore due to its max ogive diameter being .360 and the 35 caliber bore diameter of .349.
          Please check your particular cartridges SAAMI spec, & check that cartridges freebore length…

          2021-02-06 at 19:58 #512012
          brianschoonmaker
            Up
            0
            Down
            ::

            I also picked one of the molds up some time back. I bought it specifically for my 358Win and its a good one!!  I also have shot it in the 357 Maxi and my 350 Legend when sized down to .356.

            CW

            2021-03-27 at 19:00 #512013
            rj5208
              Up
              0
              Down
              ::

              I also picked one of the molds up some time back. I bought it specifically for my 358Win and its a good one!!  I also have shot it in the 357 Maxi and my 350 Legend when sized down to .356.

              CW

              CW,
              I just received a new mould from NOE.
              It is a 360-249-RN-V2

              It is a Round Nose Plane Base design
              If you or anyone else is interested in a trade of X # of projectiles in 35 caliber for testing
              please let me know.

              Thanks in advance

              Bob in St Augustine
              BTW, shooting a 35-40 Maynard cartridge out of a old Stevens SS 44 1/2

            • Author
              Replies
            Viewing 4 replies - 1 through 4 (of 4 total)
            • You must be logged in to reply to this topic.