Push through sizing die – Replacement Die Body

Up

-6

Down

::

These seem to be out. I could use two.

Topic

[Mike B.Moderator]

Up

0

Down

::

I could use one or two also.

[Mike B.Moderator]

Up

0

Down

::

Alvin
Al just notified me that he put 10 of the replacement die bodies on that sizing die web page.
Here is the link to that page.

https://noebulletmolds.com/site/shop/sizing-tools/bushing-push-through-size-die/die-body-replacement-parts/replacement-die-body

I just bought the two that I needed.
Hopefully you can get what you need before they all disappear once again.
Take Care, Shoot Straight, & Stay Safe.

[ryansnoemolds]

Up

0

Down

::

I need this as well as the 45 push rod. posted their too.

[ryansnoemolds]

Up

0

Down

::

being new to casting and looking to use the NOE sizing system. Isn’t it correct that without the die body the entire line is unable to be used? Looking to confirm that I’m correct.

[Mike B.Moderator]

Up

0

Down

::

Your assumption is basically correct. to use the individual push through sizing dies you will need at least one set of the push through size die body and its individual components.
attached is the link to the NOE Store website page…
https://noebulletmolds.com/site/product-category/sizing-tools/bushing-push-through-size-die/push-through-size-die-body
The set contains the small, medium, and large component parts…
I went ahead a while back and got a couple of extra die bodies for each of the basic size ranges…
I set those parts up in an empty 3 die box.
I scanned the die set of NOE die instructions that I scanned when I got the other parts set and see if the forum subject will allow me enough size to attach the three jpgs to this reply.
If I am not successful you will need to PM me with your email address and I will send the 3 jpgs on to you.
If successful they are attached below to this reply.
If you need more help please PM me…
Take Care & Stay Safe…

[ryansnoemolds]

Up

0

Down

::

That is how I understood it. Hopefully my “backorder” will not be delayed to long on backorder. I actually put it on backorder before reviewing this forum section and seeing some of the dates that requests have been made. I’m still a few weeks away from my hopefull casting start date but hope to have all my materials on hand as best I can.

[ryansnoemolds]

Up

0

Down

::

have had some inquiry on the length backorder for this item on castboolits.com Hopefully some will post here as well. looks like from the previous posts as well as possible current backorders a run on thse may be fruitful.

please reply with any eta.

knowing circumstances, stay safe

[Mike B.Moderator]

Up

0

Down

::

This from March of 2017 may help.
http://noebulletmolds.com/smf/index.php/topic,1624.0.html

[redhawk0Participant]

Up

0

Down

::

I’m  in for one….already ordered on backorder.

[EDIT] – I received my order today…including the Die Body kit.  Much appreciated.

redhawk

[Author]

Replies