.25 caliber bore rider? | NOE Bullet Moulds

This topic is empty.

Creator

Topic
2014-10-25 at 03:21 #487680
jeffreyclark
Up
0
Down
::
I was just thinking that there are not many heavy .25 caliber designs that fit my .25-06 or Bob well. What about something with a bore rider nose like a downsized 6.5mm design or 311299? Or ditch the top groove and stretch out the 260 100gr. Something so the lube grooves and gas check stay up in the neck instead of down in the case and weighs around 120gr.
Creator

Topic

Viewing 15 replies - 1 through 15 (of 22 total)

1 2 →

Author

Replies
2014-10-27 at 20:02 #493657
frankelliott
Participant
Up
0
Down
::
I just happen to have such a design on file. This bullet isn’t my design, it’s actually a proven Schuetzen design (PB) that’s been around a few years, done by David Mos. He is no longer in business. Breech seated this bullet has shot 3 perfect scores of 250 on the 25 ring target at 200 yards and at least one or more 250 in practice, this at 1680 fps in a 25/20 WCF. The 25 ring is 1.5″ so, his groups are in the 1.25 range @ 200 or .6 MOA.

Frank
2014-10-28 at 03:54 #493658
teemu
Participant
Up
0
Down
::
.260 diameter and i´m interested….
2014-10-28 at 05:31 #493659
frankelliott
Participant
Up
0
Down
::
It’s design in WW, with tin or antimony, it will cast about .259.

Frank
2014-10-28 at 09:49 #493660
teemu
Participant
Up
0
Down
::
I cast only for airguns so I need to have margin to use sizing die and calibrate atleast 0.02. And I use pure lead and 2-3% tin alloy…So .260 is only option for me
2014-10-28 at 22:07 #493661
frankelliott
Participant
Up
0
Down
::
Let’s see how much interest that anyone has in this. I can move the dimensions around in both length and dia.

Frank
2014-10-29 at 01:05 #493662
mikebohannan
Participant
Up
0
Down
::
I would be interested in something like this that had a bit shorter shank that would stay inside a 250 Savage neck and work through a Savage 99
I suspect it would need to be close to 100 grains max. That should also work pretty good through a 257 Roberts
2014-10-29 at 01:26 #493663
jeffreyclark
Up
0
Down
::
Those look pretty good frnkeore, thanks for the drawings. I think those would work pretty well in both cartridges even though they are for breach seating. I am pretty sure Al could make it a .260″. I don’t think it needs the dirt groove in front though.
2014-10-31 at 10:24 #493664
teemu
Participant
Up
0
Down
::
I hope this one goes to mill…just looking something bigger than 100gr already have that mold and it looks promising…at .260 diameter
2014-11-12 at 21:35 #493665
richardhart1
Up
0
Down
::
I’d go for 1 if it were up around 120 . There is a Bob, 25-06′ and a 264 paper patching work up in the not to distant future.
2014-11-13 at 18:13 #493666
teemu
Participant
Up
0
Down
::
don´t think it is going forward….. so i probably take it from Australia…. :'(
2014-11-13 at 21:17 #493667
frankelliott
Participant
Up
0
Down
::
I’ll try to help it out by posting it over on Cast Boolits.

Frank
2014-11-13 at 23:35 #493668
dennislanthier
Up
0
Down
::
I will take one. Question– how many cav, solid or hp, pb or gc.
2014-11-13 at 23:43 #493669
frankelliott
Participant
Up
0
Down
::
You guys are 1/2 way there

Frank
2014-11-14 at 10:03 #493670
teemu
Participant
Up
0
Down
::
I’ll try to help it out by posting it over on Cast Boolits.

Frank

Thats good idea,rather taking mold here than Australia….
2014-11-19 at 18:57 #493671
rayh
Up
0
Down
::
I thought i had sent a reply the other day but don’t see. I’d like to be added to the list. I’m having computer problem and will be a couple day before I can check back(I’m using a friends system). thanks, Ray
Author

Replies

Viewing 15 replies - 1 through 15 (of 22 total)

1 2 →

You must be logged in to reply to this topic.