.257 cal 112 gr. Bob’s Boattail Moulds in the Store

Home › Forums › NOE Forums › NOE Archive › Historical Archive › Using NOE Moulds › Air Guns › .257 cal 112 gr. Bob’s Boattail Moulds in the Store

  • This topic is empty.
  • Creator
    Topic
  • 2016-07-06 at 19:38 #488822
    rsterne
    Participant
      Up
      0
      Down
      ::

      Al finally figured out how to make moulds for this long, skinny bullet, and it’s now in the NOE Store….  http://noebulletmolds.com/NV/index.php?cPath=374_376

      257-113-FN_BT_113_gr_Sketch_zpso7ulddpq.jpg

      The moulds are in limited quantity, three each of 2, 3, 4, and 5 cavity in aluminum…. Recommended twist is 7″, and TJ’s have a mandrel available to make barrels…. The high Sectional Density of this bullet will require the use of long barrels, and high pressure, in order to reach appropriate velocities…. 3600 psi and 30″ long, or an equivalent combination, is the recommended minimum….

      There is a 20% off sale on this week at NOE, you should have received your Discount Code ….

      Bob

    • Creator
      Topic
    • You must be logged in to reply to this topic.