- This topic is empty.
-
Topic
-
Schofield
-
Replies
-
dennissisung
With my name being added to the list, I’m guessing you picked up on the “269-163-RN-W6 4 cavity GC” that was in my original post…
But probably should have specified Aluminum, just noticed the ? in my line. Never tried a brass mold, got bunches of iron molds, as a 4 cavity I suspect lighter is better. Cast up a bunch of 429303’s with a 4 cavity mold last week. Wrist took several days to recover.
Thanks for adding me.
I’m looking forward to trying out this mold. All the other NOE molds I have have worked great, I expect this will do what I need it to.
Sid
Mike B.
Sid
I added your name because I saw that detail. However the fact that you also in your posting were not too specific as to Brass or Aluminum for the mould material prompted my initial posting… along with your comment in regard about the different number of cavities that you might be willing to purchase, plus the fact that that particular mould is also offered in a 5 cavity version was a factor in my initial reply to you…
It was from your comments as though you did not really know what potentially it was that your could specifically request… in your inventory request posting…
Also you apparently did not enter a PM address in your membership profile when you initially signed up as a forum member yesterday…
So no PM could be immediately sent to you to query about your request details… as I looked to PM you before posting the updated listing… after trying to locate your PM address in the membership files… Thus the delay between my two postings…
Hopefully everything is kosher as to what was posted this AM… as it all had to be done on line… on the forum… If not please say so so that the final intel that the forum thread gives to Al is as accurate as possible … when the run finally hits # 1 in the que line…
Also… If down the line you… want someone via the NOE forum to reply via PM to you in regard to an update, or on an order status request such as this… or other forum threads… you might want to add your PM address to your members profile…
None of the other forum members can see your entered PM address …. there is simply a symbol of an envelope by your name in your members profile which indicates that you can be PMed… Finally one PM can be basically be copied to all the members of the group that have a PM address in their members profile…
It allows you to be PMed about details on request such as this or order status update or change … in a much more timely manner … down the line… as the forum basically acts as a technical intermediary when you PM another member… about thread details & such… while keeping both of the members email addresses hidden from each other …
Your call on that…
Now you know why the second posting was a delayed & updated list… with ? marks.
I sincerely hope that you understand…
Mike B.Matthew Fleet
List updated 5-7-21
Description: 269-163-RN-W6
1. Schofield Alum 269-163-RN-W6 5 Cav GC + Teflon Sprue Plate
2. OGC4 Alum 269-163-RN-W6 ? Cav PB or GC ?
3. TinCan Alum 269-163-RN-W6 ? Cav PB or GC ?
4. Softwarejanitor Alum 269-163-RN-W6 2 or 5 Cav GC 4-16-21
5. Sigma ? 269-163-RN- W6 ? Cav PB or GC ? 3-26-21
6. Mike B. Alum 269-163-RN-W6 2 Cav PB + Teflon Sprue Plate 3-29-21
7. kermode1022 Alum 269-163-RN-W6 2 Cav GC + Teflon Sprue Plate 4-09-21
8. matthunt101 Alum 269-163-RN-W6 5 Cav GC 4-09-21
9. selair_chapman Alum 269-163-RN-W6 5 Cav GC 4-16-21
10. wcn2018 Alum 269-163-RN-W6 5 Cav GC + Teflon Sprue Plate 4-26-21
11. Sid Alum 269-163-RN-W6 4 Cav GC 5-05-21
12. fleetmat Alum. 269-163-RN-W6 5 Cav GC 5-07-21softwarejanitor
You may have to also phone Al and see what he says as lately I cannot get an email response from him or anyone who works at NOE in regard to my emails…
Also while you are at it the moulds are only step 1 if there is no schedule to make up the NOE sizing materials that everyone seems to need.
Take Care & Stay Safe…
Schofield
Gentlemen,
Being not able to try to call NOE to request intel on the forum threads, & in response to Schofields request of yesterday…
I have just posted a request on the forum website under Questions / Problems respectfully requesting that NOE begin posting a production schedule on the forum website as NOE used to do.
If you agree with this please also post your requests for a production schedule under this forum thread topic… & Please get the other forum members to also want some intel to also do so…
Take Care, & Stay Safe…
Gentlemen,
Being not able to try to call NOE to request intel on the forum threads, & in response to Schofields request of yesterday…
I have just posted a request on the forum website under Questions / Problems respectfully requesting that NOE begin posting a production schedule on the forum website as NOE used to do.
If you agree with this please also post your requests for a production schedule under this forum thread topic… & Please get the other forum members to also want some intel to also do so…
Take Care, & Stay Safe…
I would love to have a schedule so we would know when things are going to be run, that would be very useful!
wcn2018
Gentlemen
The lists of requests that I have been unofficially compiling is a list of requests for said 269-163-RN-W6 to be run once again to put product into this and other NOE moulds stock bins at NOE.
Without it there would basically be no updated tracking on the forum request that each of you have made in regard to your individual requests, if the forum threads are not checked regularly by NOE personnel to keep track of the individual mould requests requesting a new run of out of stock product…
The list of requests are solely for a potential new production run… of said moulds… so that Al will know what specifically is being requested by the forum members down the line.
The requests for a new inventory run … includes the cavity count, aluminum or brass mould material, & with or without a gas check shank that is being requested by forum members to be run.
This is to potentially give Al more intel for a requested new mould inventory run… should said future requested mould inventory run ever come to fruition.
You now have Al’s posting in regard to the forum thread… under the Questions / Problems forum thread.
I have quoted it here for your convenience…
Re: Request that NOE begin a posting of the production schedule on the forum
« Reply #2 on: Today at 01:36:22 »
Quote
Will see what we can do but not at this time – I don’t have the man power or the time myself
I can’t keep up with production as it is – Sorry needed in the shop more than the websiteWorking 14 to 15 hours a day 7 days a week – If this is a problem we can shut down the form until we get a handle on production
We are going to get through this but it’s going to take some time – production and getting a handle on the back orders is my top priority!!
Bullet maker, maker
Al NelsonAl’s reply is not a problem for me… It simply clarifies the position that NOE is in from the Owner of NOE… It also answers a number of other topics in regard to NOE’s business status…
Take Care, & Stay Safe…
matthunt101
dennissisung
Mike B.
Matthew Fleet
softwarejanitor
wcn2018
matthunt101
- You must be logged in to reply to this topic.