279 124Gr. FN (6.8 SPC)

Home › Forums › NOE Forums › NOE Archive › Historical Archive › Group Buys › Archived Buys › 279 124Gr. FN (6.8 SPC)

  • This topic is empty.
  • Creator
    Topic
  • 2014-07-13 at 17:18 #487439
    SwedeNelson
    Keymaster
      Up
      0
      Down
      ::

      NOE 279 124Gr. FN
      This is a great design by frnkeore for the 6.8 SPC
      CLOSED
      Will be on the mill next

      We will be running this like a inventory run

      NOE_Bullet_Moulds_279_124Gr_FN.jpg

      NOE_Bullet_Moulds_279_124Gr_FN_124_gr_Sketch.jpg

      NOE_Bullet_Moulds_279_126Gr_FN_PB_126_gr_Sketch.jpg

      We will be running 2 cavity, 4 cavity, 5 cavity GC or PB. We will offer mixed GC and PB in 2 cavity,
      4 cavity moulds only, 1 each in 2 cavity and 2 each in 4 cavity (no mixed GC, PB in 5 cavity blocks).
      Top punch, wrenches and sprue lube are extras now if you want them

      Prices will be our standard website prices ( http://www.noebulletmoulds.com )
      2 cavity $79.00
      4 cavity $92.00
      5 cavity $99.00
      Lyman/RCBS style Top Punch $5.00
      Saeco style Top Punch $7.50
      Mould Wrenches / Sprue Lube $2.50

      Will run these as soon as we get 10 signed up on each and we get the tooling in.
      Will have them listed on our website as a inventory item as soon as we have them ran
      So you can use Pay-Pal, Credit Card or Check / Money order
      Post a “I want” and receive a 15% discount off the website
      We will PM a discount code for you to use at check out

      If you have question – Visit our website or PM me

      Thanks
      Swede Nelson

    • Creator
      Topic
    Viewing 15 replies - 16 through 30 (of 42 total)
    1 2 3
    • Author
      Replies
    • 2014-07-24 at 00:26 #492154
      larrysmith2
        Up
        0
        Down
        ::

        I would like a 4 cavity plain base, no punch.

        2014-07-24 at 05:18 #492155
        adamsutherland
        Moderator
          Up
          0
          Down
          ::

          List updated.

          2014-07-25 at 14:33 #492156
          daveridenour
          Participant
            Up
            0
            Down
            ::

            Updated sign-up list (7-30-14):

            1. dh2 –  4 cavity 2 GC/2PB, with Lyman/RCBS top punch
            2. DR Owl Creek –  4 cavity GC, with Lyman/RCBS top punch
            3. tnelson –  4 cavity 2 GC/2PB, with Lyman/RCBS top punch
            4. jameslovesjammie –  5 cavity GC, no top punch
            5. timbuck –  5 cavity GC, no top punch
            6. klink –  5 cavity GC, with Lyman/RCBS top punch
            7. wcavasos –  4 cavity 2GC/2PB, with Lyman/RCBS top punch
            8. Leather2 –  5 cavity PB
            9. I51s –  4 cavity PB, no top punch
            10. timbuck –  5 cavity GC (2nd mould)
            11. Maximumbob54 –  2 cavity PB, no top punch

            2014-07-25 at 15:29 #492157
            timschmidt
            Participant
              Up
              0
              Down
              ::

              I will have another 5 cavity gc for a total of two.
              We have 10 now.

              2014-07-26 at 14:23 #492158
              daveridenour
              Participant
                Up
                0
                Down
                ::

                I just wanted to say a big THANK YOU to everyone who signed-up for this group buy, and particularly to Timbuck for putting us over the top on this one!

                Anyone else who wants to join us can still sign on to the group buy, and get a great 6.8 SPC mould while we’re waiting for the tooling.

                Thanks again!

                Dave

                2014-07-27 at 06:24 #492159
                adamsutherland
                Moderator
                  Up
                  0
                  Down
                  ::

                  OK list updated and Al notified, leather2 still hasn’t to confirmed on here his message to Dave about number of cavities. It would be good if he did this so as to be sure he gets what he wants.

                  2014-07-27 at 16:37 #492160
                  SwedeNelson
                  Keymaster
                    Up
                    0
                    Down
                    ::

                    Last Call
                    Will get the tooling ordered first thing tomorrow.
                    As soon as it’s in (Its been taking a week to a week and a half to get it in) will close the buy and get it on the mill.

                    Thanks to all that have ordered and if you still want one get on the list soon!
                    Bullet maker, maker
                    Swede Nelson

                    2014-07-30 at 13:51 #492161
                    robertbarker
                      Up
                      0
                      Down
                      ::

                      I would like a two cavity plain base and don’t need a nose punch.

                      2014-07-30 at 15:57 #492162
                      daveridenour
                      Participant
                        Up
                        0
                        Down
                        ::

                        Thank you!

                        2014-07-30 at 16:26 #492163
                        adamsutherland
                        Moderator
                          Up
                          0
                          Down
                          ::

                          List updated.

                          2014-08-05 at 15:08 #492164
                          timschmidt
                          Participant
                            Up
                            0
                            Down
                            ::

                            Does everybody think you only need one mold for a semi auto rifle????
                            Just think how much time you will save so you can reload and shoot more.

                            2014-08-05 at 15:36 #492165
                            patrickcullen
                              Up
                              0
                              Down
                              ::

                              Does everybody think you only need one mold for a semi auto rifle????

                              I’m just getting my toes wet, and in fact getting the ‘combo’ mold to see which pill shoots better.

                              Just think how much time you will save so you can reload and shoot more.

                              I have hornady for that, no?

                              2014-08-05 at 17:50 #492166
                              daveridenour
                              Participant
                                Up
                                0
                                Down
                                ::

                                I’m actually going to use mine for a 270 WSM in a Browning A-Bolt. I think that with the length and weight of this bullet, I’ll be able to keep all of it in the case neck. That should give me about 75 grains of useable case capacity for the power. I’m not sure how that will work out, but I’ll give you a full report when I find out.  ;D

                                Dave

                                2014-08-10 at 16:14 #492167
                                timothyjanke
                                Participant
                                  Up
                                  0
                                  Down
                                  ::

                                  I’ll take a 2cavity–one GC and one PB plus a Saeco top punch.

                                  Tim

                                  2014-08-11 at 05:49 #492168
                                  adamsutherland
                                  Moderator
                                    Up
                                    0
                                    Down
                                    ::

                                    List updated.

                                  • Author
                                    Replies
                                  Viewing 15 replies - 16 through 30 (of 42 total)
                                  1 2 3
                                  • You must be logged in to reply to this topic.