300-68-FN (Bob’s Boat Tails)

Home › Forums › NOE Forums › NOE Archive › Historical Archive › Air Rifle Moulds › (AR) Group Buy Discussions › 300-68-FN (Bob’s Boat Tails)

  • This topic is empty.
  • Creator
    Topic
  • 2015-10-17 at 21:43 #488342
    SwedeNelson
    Keymaster
      Up
      0
      Down
      ::

      Working with rsterne (Bob’s Boat tails) on some Air rifle moulds
      We have come up with the following design
      27″ Twist – fits Hatsan & Marauder Magazines


      Post if you have any interest and will see what we can do.

      Bullet maker, maker
      Al Nelson

    • Creator
      Topic
    Viewing 15 replies - 1 through 15 (of 15 total)
    • Author
      Replies
    • 2015-10-17 at 22:34 #500881
      rsterne
      Participant
        Up
        0
        Down
        ::

        This will fit the magazine on the Hatsan Carnivore, the chamber may or may not require work to allow the bullet to chamber easily…. and will stabilze in the Hatsan barrel…. It fits the .25 cal MRod magazine modified to .30 cal by AirGunLab…. It will stabilize in the 0.300″ cal x 0.294″ land 26″ twist TJ’s barrel that Sean Pero and I designed, which won the 2014 EBR….

        Bob

        2015-10-29 at 00:19 #500882
        shaunsharpton
          Up
          0
          Down
          ::

          I’m interested in these for sure! The Flex is using the TJs .30 Pellet barrel that won the EBR. It’s 17″ on the Flex.

          2015-11-23 at 16:40 #500883
          rsterne
          Participant
            Up
            0
            Down
            ::

            I’m in, with a HP pin….

            Bob

            2015-12-06 at 04:19 #500884
            scorpio
              Up
              0
              Down
              ::

              im in !!!

              2015-12-06 at 20:24 #500885
              traviswhitney
                Up
                0
                Down
                ::

                Im in also.

                2015-12-09 at 00:56 #500886
                johnpedro
                  Up
                  0
                  Down
                  ::

                  I’m in too.

                  2015-12-09 at 02:16 #500887
                  maxgarnett
                    Up
                    0
                    Down
                    ::

                    I would go for a 63 gr, But a 68 would be ok to move along the group buy , Whatever is better for the GTA group. This would be for a flex so it has to fit the mag.

                    2015-12-09 at 02:24 #500888
                    johnpedro
                      Up
                      0
                      Down
                      ::

                      Current Flex mag is .450

                      2015-12-09 at 02:59 #500889
                      rsterne
                      Participant
                        Up
                        0
                        Down
                        ::

                        The HollowPoint is 63 gr., the FlatNose is 68 gr…. Both this and the 74/80 gr. were designed for the MRod / FLEX magazine…. Both the HP and FN version will be included in the Group Buy…

                        Bob

                        2015-12-10 at 16:20 #500890
                        maxgarnett
                          Up
                          0
                          Down
                          ::

                          Ok count me in for a 2 cavity alum mold for a bobs boat tail .30 cal for flex

                          2015-12-24 at 18:09 #500891
                          maxgarnett
                            Up
                            0
                            Down
                            ::

                            I am still in for a alum, double for the flex , 30 cal any wt. you all make standard I will work with.
                            thanks

                            2016-01-04 at 19:24 #500892
                            Nwaf2007
                              Up
                              0
                              Down
                              ::

                              i am in  mold  4 cavity  2 hp

                              2016-06-29 at 00:43 #500893
                              shaunsharpton
                                Up
                                0
                                Down
                                ::

                                What happened with this buy? I was out of the country for 6 weeks. Did I miss it?

                                2016-06-29 at 01:06 #500894
                                rsterne
                                Participant
                                  Up
                                  0
                                  Down
                                  ::

                                  You’re still on the list….  http://noebulletmolds.com/smf/index.php/topic,1320.0.html

                                  Bob

                                  2016-07-24 at 21:25 #500895
                                  rsterne
                                  Participant
                                    Up
                                    0
                                    Down
                                    ::

                                    Now at Last Call….  http://noebulletmolds.com/smf/index.php/topic,1320.0.html

                                    Bob

                                  • Author
                                    Replies
                                  Viewing 15 replies - 1 through 15 (of 15 total)
                                  • You must be logged in to reply to this topic.