.311-129-SP

Home › Forums › NOE Forums › NOE Archive › Historical Archive › Inventory Runs › What you would like to see ran › .311-129-SP

  • This topic is empty.
  • Creator
    Topic
  • 2017-05-23 at 13:17 #489294
    ericstevens
    Participant
      Up
      -12
      Down
      ::

      I think the 314-129-SP reduced to .311″ would be a great lightweight bullet for the 300BO in the AR platform at minimum.

      http://noebulletmolds.com/smf/index.php/topic,276.0.html

      Reducing the bands and nose .003″so that the bullets can be more easily sized .309-.311″ would be VERY helpful for ARs with tight throats.

    • Creator
      Topic
    Viewing 4 replies - 1 through 4 (of 4 total)
    • Author
      Replies
    • 2017-05-26 at 13:56 #508125
      andrewmason
      Participant
        Up
        0
        Down
        ::

        I  too would like to see this. The 314 version sized to .310 just won’t work a 311 or 310 version would be good.

        2017-05-26 at 15:22 #508126
        Full.Lead.Taco
        Keymaster
          Up
          0
          Down
          ::

          would you be interested in it just like it is but with .311 bands? or slick sided and no crimp groove @ .311 or .310 for powder coating?

          2017-05-29 at 12:30 #508127
          ericstevens
          Participant
            Up
            0
            Down
            ::

            The nose tapers from “.300″-.310″ over .150”.  The .300″ is OK, but the .310″ dimension needs reduced as well. 

            I hadn’t thought about a slick-sided PC bullet, but there are folks who would jump all over that.  I would be thinking real hard about having one of those just to compare with a GG variety.

            2017-09-05 at 23:38 #508128
            mattazelton
            Participant
              Up
              0
              Down
              ::

              I’d be interested in the gas checked version with conventional lube groove.  .309″-.310″ on the bands and .300″ on the nose.

            • Author
              Replies
            Viewing 4 replies - 1 through 4 (of 4 total)
            • You must be logged in to reply to this topic.