338 230Gr. RF (Frankenstein)

Home › Forums › NOE Forums › NOE Archive › Historical Archive › Group Buys › Archived Buys › 338 230Gr. RF (Frankenstein)

  • This topic is empty.
  • Creator
    Topic
  • 2014-08-01 at 16:48 #487484
    SwedeNelson
    Keymaster
      Up
      0
      Down
      ::

      NOE 338 230Gr. RF (Frankenstein)
      We will be running this like a inventory run
      CLOSED
      On the mill next
      Check below and make sure we have your order correct

      NOE_Bullet_Moulds_338_230Gr_RF-1.jpg

      NOE_Bullet_Moulds_338_230Gr_RF_232_gr_Sketch-1.jpg

      NOE_Bullet_Moulds_338_230Gr_RF_PB.jpg

      NOE_Bullet_Moulds_338_230Gr_RF_PB_234_gr_Sketch.jpg

      NOE_Bullet_Moulds_338_230Gr_RF_HP_225_gr_Sketch.jpg

      We will be running 2 cavity, 4 cavity, 5 cavity, RG2 and RG4 (HP and FN and Cup pins) Aluminum.
      And RG2 cavity Brass, GC or PB. We will offer mixed GC and PB in 2 cavity, 4 cavity RG2 and RG4
      moulds only (no mixed GC, PB in 5 cavity blocks).

      We offer Blank RG pins on our website for you that like to make your own.
      Top punch, wrenches and sprue lube are extras now if you want them

      Prices will be our standard website prices ( http://www.noebulletmoulds.com )
      2 cavity $79.00
      4 cavity $92.00
      5 cavity $99.00
      RG2 cavity $103.00
      RG4 cavity $133.00
      RG2 cavity BRASS $125.00

      Lyman/RCBS style Top Punch $5.00
      Saeco style Top Punch $7.50
      Mould Wrenches / Sprue Lube $2.50
      RG2 blank pin set $4.50
      RG4 blank pin set $9.00

      Will run this as soon as we get 10 signed up. We have tooling on hand so we ca run this one fast.
      Will have them listed on our website as a inventory item as soon as we have them ran
      So you can use Pay-Pal, Credit Card or Check / Money order
      Post a “I want” and receive a 15% discount off the website
      We will PM a discount code for you to use at check out

      If you have question – Visit our website or PM me

      Thanks
      Swede Nelson

    • Creator
      Topic
    Viewing 15 replies - 1 through 15 (of 61 total)
    1 2 3 4 5
    • Author
      Replies
    • 2014-08-01 at 16:49 #492684
      SwedeNelson
      Keymaster
        Up
        0
        Down
        ::

        List of orders
        1 Dschuttig 4 cavity gc
        2 Hardcase RG2 cavity GC Brass
        3 Intel6 4 cavity GC
        4 dromia 4 cavity gc aluminium
        5 FLYCUTTER RG4 cavity gc aluminium
        6 Andy_P 4 cavity gc
        7 Doctorggg 4 cavity 2gc 2pb
        8 Treekiller RG4 cav GC aluminium
        9 Closey  2 cavity 1pb 1 gc aluminium
        10 Woodshot 2 cavity gc aluminium
        11 Swiss 96/11 5 cavity gc
        12 hikerlt RG2 gc brass
        13 bjornb 2 cavity gc
        14 Fishman 2 cavity gc
        15 357tc RG2 PB
        16 ak_milsurp 2 cavity, GC
        17 Lionel Bull 2 cavity GC
        18 CraigB 4 cavity 2 pb 2 gc
        19 tygar 2 cav GC
        20  Swiss 96/11 5 cavity gc

        Thanks
        Bullet maker, maker
        Al Nelson

        2014-08-02 at 02:34 #492685
        johntibbs
        Participant
          Up
          0
          Down
          ::

          I would like a 4 cavity with 2 gc and 2 pb.  My barrel is .333/.317.  I am worried the nose won’t fit.

          2014-08-02 at 03:26 #492686
          andrewdunn
            Up
            0
            Down
            ::

            Swede, would you add a Lyman/R&B top punch to mine? Thanks!

            2014-08-02 at 18:44 #492687
            gregorygay
            Participant
              Up
              0
              Down
              ::

              I will take a mixed cavity 2 gc/2pb 4 cavity or 2 cavity if you aren’t making them in 4.  in a regular style.

              2014-08-03 at 02:42 #492688
              robertkarkut
              Participant
                Up
                0
                Down
                ::

                I’m sorry Al, I didn’t give you all the information on my request but I get all excited and worked up when I see a mold I have to get. So please update my post with a RG-4 GC. aluminum. Thank you.

                2014-08-03 at 12:28 #492689
                adamsutherland
                Moderator
                  Up
                  0
                  Down
                  ::

                  List updated.

                  2014-08-03 at 18:47 #492690
                  danielschuttig
                  Participant
                    Up
                    0
                    Down
                    ::

                    4 cav gas check for mine.

                    2014-08-04 at 04:49 #492691
                    adamsutherland
                    Moderator
                      Up
                      0
                      Down
                      ::

                      List updated.

                      2014-08-04 at 05:34 #492692
                      Treekiller
                        Up
                        0
                        Down
                        ::

                        1 4 cav GC hollow point mold HP all 4 Cav. aluminium
                        Dan

                        2014-08-04 at 06:12 #492693
                        adamsutherland
                        Moderator
                          Up
                          0
                          Down
                          ::

                          List updated.

                          2014-08-04 at 08:30 #492694
                          joeclose
                            Up
                            0
                            Down
                            ::

                            I want 2 cavity pb aluminium & Lyman/RCBS style Top Punch.

                            Joe

                            2014-08-04 at 08:43 #492695
                            adamsutherland
                            Moderator
                              Up
                              0
                              Down
                              ::

                              List updated.

                              2014-08-04 at 13:01 #492696
                              jamesrewbury
                              Participant
                                Up
                                0
                                Down
                                ::

                                I want 2 cavity gc aluminium and lyman type top punch

                                2014-08-04 at 16:07 #492697
                                adamsutherland
                                Moderator
                                  Up
                                  0
                                  Down
                                  ::

                                  List updated, Al notified.

                                  2014-08-04 at 16:34 #492698
                                  SwedeNelson
                                  Keymaster
                                    Up
                                    0
                                    Down
                                    ::

                                    LAST CALL
                                    Will get the tooling ordered and in the works
                                    Taking about a week and a half for the tooling

                                    Bullet maker, maker
                                    Al Nelson

                                  • Author
                                    Replies
                                  Viewing 15 replies - 1 through 15 (of 61 total)
                                  1 2 3 4 5
                                  • You must be logged in to reply to this topic.