41 cal Round Nose for Revolver/Levergun

This topic is empty.

Creator

Topic
2018-12-30 at 21:07 #489832
jonbaldwin
Participant
Up
0
Down
::
Is there any interest in something like the Lyman 410426?
with a single lube groove and a crimp groove, much like a 41 cal version of the NOE 360-150-RN 5 cavity PB (38 Spl.) [360-147-RN-AK1-82]
http://noebulletmolds.com/NV/product_info.php?cPath=35_290&products_id=1159

The Lyman version is heavier than I like (250gr), I’d prefer something close to standard weight, like in the range of 215gr to 230gr.
Jon
Creator

Topic

Viewing 13 replies - 1 through 13 (of 13 total)

Author

Replies
2019-01-03 at 15:41 #511458
Full.Lead.Taco
Keymaster
Up
0
Down
::
did you see this group buy?
http://noebulletmolds.com/smf/index.php/topic,2705.0.html
2019-01-06 at 19:38 #511459
jonbaldwin
Participant
Up
0
Down
::
I have seen that GB, but thanks for pointing it out. I do have numerous 41 cal molds, 5 of which are SWC…one of those happens to be a NOE Keith-type RG-2 from the first 41 SWC groupbuy in 2010 or 11?

At the current time. I am looking for a 41 cal mold with a RN.
Thanks,
Jon

did you see this group buy?
http://noebulletmolds.com/smf/index.php/topic,2705.0.html
2019-01-09 at 13:51 #511460
johnjackson
Participant
Up
0
Down
::
Have a 41 Henry rifle and would like a RN for it because rifle will not chamber any SWC mold I own .(41032/ 410459/ Lee 41 SWC )
2019-01-09 at 14:40 #511461
Full.Lead.Taco
Keymaster
Up
0
Down
::
We could always draw up a round nose with a very small flat point for the leverguns if there is enough interest.
2019-01-12 at 05:23 #511462
Greg Parsons
Participant
Up
0
Down
::
At one time Lyman/Ideal made a 212gr RNFP, 41028. I have a single cavity version of it and it fed just fine in my 1894 Marlin when I had it. It shoots good out of all of my .41s that I have.

Greg
2019-01-12 at 07:30 #511463
adamsutherland
Moderator
Up
0
Down
::
The OPs idea with a small flat nose, dropping at 0.403″ would be ideal for my 38-40 under lever.
2019-01-13 at 20:40 #511464
SwedeNelson
Keymaster
Up
0
Down
::
Something to look at

Any changes welcome!

Bullet maker, maker
Al Nelson
2019-01-13 at 22:35 #511465
brianadams
Participant
Up
0
Down
::
I like it. Sometimes a revolver just doesn’t want to shoot SWC’s and a round nose will pull groups into acceptable tightness. I’ll take one when it’s offered.
2019-01-13 at 22:40 #511466
adamsutherland
Moderator
Up
0
Down
::
Nice bullet but too big for my needs in the 38-40.
2019-01-14 at 23:42 #511467
Greg Parsons
Participant
Up
0
Down
::
Something to look at

Any changes welcome!

Bullet maker, maker
Al Nelson

Al,

You make it and I will buy one It looks almost like my 41028 bullet.

Greg
2019-01-18 at 00:52 #511468
matthewsaunoras
Participant
Up
0
Down
::
I’m in for one too
2019-01-18 at 23:37 #511469
Anonymous
Up
0
Down
::
I also would be in for a mould. Either a 5 cavity or a RG4 if offered.
2019-01-28 at 18:24 #511470
Full.Lead.Taco
Keymaster
Up
0
Down
::
group buy is active, click on the link below and sign up if you want one.

http://noebulletmolds.com/smf/index.php/topic,2741.0.html
Author

Replies

Viewing 13 replies - 1 through 13 (of 13 total)

You must be logged in to reply to this topic.