432-277 Keith

Home › Forums › NOE Forums › NOE Archive › Historical Archive › Using NOE Moulds › Favorite loads › 432-277 Keith

  • This topic is empty.
  • Creator
    Topic
  • 2017-03-01 at 21:17 #489149
    jamesforshey
    Participant
      Up
      0
      Down
      ::

      Any favorite loads for this NOE mold? Ruger SBH in 44 mag, Flattop BH in 44 Spl. Thanks- Jim

    • Creator
      Topic
    Viewing 7 replies - 1 through 7 (of 7 total)
    • Author
      Replies
    • 2017-06-12 at 01:02 #506989
      julianbownes
      Participant
        Up
        0
        Down
        ::

        21.2 grains of H110 bullet seated past the crimp groove by a few thousandths.

        2017-06-12 at 02:57 #506990
        Full.Lead.Taco
        Keymaster
          Up
          0
          Down
          ::

          21.2 grains of H110 bullet seated past the crimp groove by a few thousandths.

          That would be a 44 mag load.  Don’t try it in 44 special. I have also used that load in my super red hawk in 44 mag to thoroughly demolish milk jugs.

          2017-06-12 at 14:08 #506991
          julianbownes
          Participant
            Up
            0
            Down
            ::

            My apologies….I didn’t read it carefully. Wont fit in a 44 Special. But it is very accurate in my 44 Magnums.

            2017-07-03 at 02:39 #506992
            matthewsaunoras
            Participant
              Up
              0
              Down
              ::

              I’m also using 21 gr H110 behind the similar weight 278 gr WFN.  Very accurate 44 mag load. 

              2017-08-13 at 17:41 #506993
              jamesforshey
              Participant
                Up
                0
                Down
                ::

                Thanks guys. I was hoping for a H110/W296 load as that’s my favorite powder. Looking forward to milk jug season after the LLBWS is over. In hollow base form, this bullet has been AWESOME in the special. It weighs 255 with a WW/2% tin mix. 12.5 to 15 grains of 2400 all seem very accurate. I’ll try to narrow it down with the chrony to see if any stand out. Also trying SR7625 because I’ve got 10 lbs. of it. Jim

                2017-08-15 at 02:25 #506994
                Full.Lead.Taco
                Keymaster
                  Up
                  0
                  Down
                  ::

                  Thanks guys. I was hoping for a H110/W296 load as that’s my favorite powder. Looking forward to milk jug season after the LLBWS is over.

                  In case you want to see some milk jug “season” results in video form with the h110/296 load:  https://youtu.be/ZS24NCd_KKU?t=1m56s

                  2019-04-26 at 21:14 #506995
                  andrewbirchall
                  Participant
                    Up
                    0
                    Down
                    ::

                    In my Rossi I am using 5.0 grains of Viht N310 and it is accurate at 50 metres

                  • Author
                    Replies
                  Viewing 7 replies - 1 through 7 (of 7 total)
                  • You must be logged in to reply to this topic.