460 version of the 358009

Home › Forums › NOE Forums › NOE Archive › Historical Archive › Group Buys › Group Buy Discussions › 460 version of the 358009

  • This topic is empty.
  • Creator
    Topic
  • 2014-05-29 at 20:29 #487297
    SwedeNelson
    Keymaster
      Up
      0
      Down
      ::

      Any interest in a 460 version of the 358009

      NOE_Bullet_Moulds_460_480Gr_RN_GC.jpg

      NOE_Bullet_Moulds_460_480Gr_RN_GC_474_gr_Sketch.jpg

      NOE_Bullet_Moulds_460_480Gr_RN_PB.jpg

      NOE_Bullet_Moulds_460_480Gr_RN_PB_482_gr_Sketch.jpg

      Have tooling in hand and can turn them out in a day or two if there is any interest

      Bullet maker, maker
      Swede Nelson

    • Creator
      Topic
    Viewing 14 replies - 1 through 14 (of 14 total)
    • Author
      Replies
    • 2014-06-01 at 22:24 #490982
      anthonylafleur
      Participant
        Up
        0
        Down
        ::

        I’d be interested, Al.
        Would an RG4 type with flat, cup, and HP pins be a possibility?

        2014-06-01 at 22:36 #490983
        SwedeNelson
        Keymaster
          Up
          0
          Down
          ::

          cainttype

          Welcome to our forum
          RG’s should work great
          Hope to get a buy going on it next week

          Thanks for the interest
          Bullet maker, maker
          Al Nelson

          2014-06-26 at 19:47 #490984
          robertpedersen1
            Up
            0
            Down
            ::

            Do you have a slightly higher quality image with the dimensions?
            I’m interested, but I can’t read some of the dimensions that would be critical to an application with OAL limitations.

            2014-06-26 at 23:15 #490985
            SwedeNelson
            Keymaster
              Up
              0
              Down
              ::

              Squigie

              Does this help

              NOE_Bullet_Moulds_460_480Gr_RN_GC_474_gr_Sketch-1.jpg

              Bullet maker, maker
              Al Nelson

              2014-06-27 at 17:29 #490986
              robertpedersen1
                Up
                0
                Down
                ::

                Edit:
                Upon further inspection and measurement, it’s a no-go for me.
                Thanks for the better image, but I’ll have to find (or design ;)) something else for this rifle.

                2014-07-30 at 16:43 #490987
                SwedeNelson
                Keymaster
                  Up
                  0
                  Down
                  ::

                  Bump

                  Bullet maker, maker
                  Al Nelson

                  2014-08-28 at 01:58 #490988
                  anthonylafleur
                  Participant
                    Up
                    0
                    Down
                    ::

                    I can’t be the only one wanting this mould, Al… And tooling in hand, at that!
                    Seems to me that every .458 caliber rifle fan should have one of these.

                    2014-09-09 at 00:21 #490989
                    jasonfancher
                    Participant
                      Up
                      0
                      Down
                      ::

                      any more interest in this one. would be great with a hp

                      2014-09-12 at 00:10 #490990
                      anthonylafleur
                      Participant
                        Up
                        0
                        Down
                        ::

                          OK, Al… There’s TWO of us thinking we’d love the RG version.
                        How many more do we need???
                          I’m not totally opposed to twisting a few arms, if necessary.  :)

                        2014-09-12 at 01:37 #490991
                        jasonfancher
                        Participant
                          Up
                          0
                          Down
                          ::

                          still in if it goes active

                          2014-09-16 at 10:27 #490992
                          jasonfancher
                          Participant
                            Up
                            0
                            Down
                            ::

                            any more interest?

                            2014-09-25 at 10:29 #490993
                            jasonfancher
                            Participant
                              Up
                              0
                              Down
                              ::

                              any plans of running these since you have tooling already?

                              2014-09-30 at 16:22 #490994
                              SwedeNelson
                              Keymaster
                                Up
                                0
                                Down
                                ::

                                Got this one listed
                                http://noebulletmolds.com/smf/index.php/topic,417.0.html

                                Bullet maker, maker
                                Al Nelson

                                2014-12-07 at 01:49 #490995
                                worker
                                  Up
                                  0
                                  Down
                                  ::

                                  Sorry, will this fit Ruger .480  ?

                                • Author
                                  Replies
                                Viewing 14 replies - 1 through 14 (of 14 total)
                                • You must be logged in to reply to this topic.