566-576-HB (Pritchet) -18- GB238 (8/14/15)

Home › Forums › NOE Forums › NOE Archive › Historical Archive › Group Buys › Archived Buys › 566-576-HB (Pritchet) -18- GB238 (8/14/15)

  • This topic is empty.
  • Creator
    Topic
  • #488137
    SwedeNelson
    Keymaster
      Up
      0
      Down
      ::

      NOE 566-576-HB (Pritchet) 
      We will be running this like a inventory run

      CLOSED
      On the Mill

      N_O_E__Mold_566-Enfield_Pritchet_HB_563_gr_Sketch.jpg

      We will be running RG2 and RG4, Aluminum only.
      We will furnish two HB pins. one short and one long.
      Top punch, wrenches and sprue lube are extras now if you want them

      Prices will be our standard website prices ( http://www.noebulletmoulds.com )
      RG2 cavity (Large Blocks) $109.00
      RG4 cavity (Large Blocks) $139.00

      Lyman/RCBS style Top Punch $5.00
      Saeco style Top Punch $7.50
      Mould Wrenches / Sprue Lube $2.50

      Will run this as soon as we get 10 signed up and we get the tooling in.
      Will have them listed on our website as a inventory item as soon as we have them ran
      So you can use Pay-Pal, Credit Card or Check / Money order
      Post a “I want” and receive a 15% discount off the website
      We will PM a discount code for you to use at check out

      If you have question – Visit our website or PM me

      Thanks
      Swede Nelson

    Viewing 15 replies - 46 through 60 (of 61 total)
    • Author
      Replies
    • #498871
      adamsutherland
      Moderator
        Up
        0
        Down
        ::

        No it is still in Last Call.

        If it had been run this thread would be in Closed Buys.

        It is in the queue, looks like Al is running a little behind but it should be imminent.

        #498872
        SwedeNelson
        Keymaster
          Up
          0
          Down
          ::

          We have a run on the Mill now then this one.
          Still working out some of the bugs in it and need to post some information
          on the HB plug mould that will be offered with it.

          Working on it
          Bullet maker, maker
          Al Nelson

          #498873
          SwedeNelson
          Keymaster
            Up
            0
            Down
            ::

            CLOSED
            On the Mill

            Bullet maker, maker
            Al Nelson

            #498874
            adamsutherland
            Moderator
              #498875
              SwedeNelson
              Keymaster
                Up
                0
                Down
                ::

                Moulds are done – just finishing up the HB plug moulds now
                Hope to have everything listed the first of next week and will
                send out a PM with the discount code.

                Bullet maker, maker
                Al Nelson

                #498876
                adamsutherland
                Moderator
                  Up
                  0
                  Down
                  ::

                  Huzzah! Huzzah! Huzzah!

                  #498877
                  maillemaker
                    Up
                    0
                    Down
                    ::

                    Neat-o.  Can’t wait to make some Enfield-style cartridges!

                    Steve

                    #498878
                    SwedeNelson
                    Keymaster
                      Up
                      0
                      Down
                      ::

                      Have them listed in the web-store and PM sent with the discount code
                      Thanks to all that ordered them

                      Bullet maker, maker
                      Al Nelson

                      #498879
                      maillemaker
                        Up
                        0
                        Down
                        ::

                        My order is in!  I was surprised to discover the plug mold also available; I did not know that was going to be an offering, too!  So I picked up one of those, too!

                        Steve

                        #498880
                        adamsutherland
                        Moderator
                          Up
                          0
                          Down
                          ::

                          Aye the plug moulds were always part of the buy, mind you I think they will come into their own with the 0.550″ Prittchet which is in the line to be cut as well now.

                          #498881
                          maillemaker
                            Up
                            0
                            Down
                            ::

                            Oh man you mean I have to spend more money?  :)

                            Looks like the bigger bullet is more appropriate for the early Enfield cartridges, with the .55 being appropriate for the later rendition.  But for precision target shooting where we get to clean our bores I hope the bigger bullet works out fine.

                            Steve

                            #498882
                            adamsutherland
                            Moderator
                              Up
                              0
                              Down
                              ::

                              Your chronology is correct but they found the 0.550″ cartridge with boxwood and finally clay plugs to be the most accurate load combination in the Enfield rifled musket.

                              #498883
                              maillemaker
                                Up
                                0
                                Down
                                ::

                                Your chronology is correct but they found the 0.550″ cartridge with boxwood and finally clay plugs to be the most accurate load combination in the Enfield rifled musket.

                                Hmm.  I’m skimming volume 4 of Roundball to Rimfire and I’m not finding a mention of that.  I do find mention that the smaller diameter was intended to ease loading, and that the smaller bullet shot 18 inches higher at 500 yards and that “firing was generally better” but I do not know by what metric it was “better”. 

                                I see from here:

                                http://www.newyorkcivilwar.com/qm/cartridgetubes.pdf

                                That when the .55 diameter bullet was proposed some “editorials in British periodicals” claimed to conduct “studies” that showed the new .55 bullet to be no more accurate than the old smoothbores, but I have not found anything to counter that claim.  It’s hard to imagine the English would stick with a bullet of inferior accuracy even if it did afford easier loading.

                                Anyway it seems intuitive to me that the closer fitting the bullet to the bore the better the accuracy.

                                Steve

                                #498884
                                adamsutherland
                                Moderator
                                  Up
                                  0
                                  Down
                                  ::

                                  Can’t lay my hands on the exact Volunteer FOM data source at present but Roads clearly states p143 first edition The British Soldiers Firearm 1850-1864 “The bullet, as used in the muzzle loading Enfield, underwent its second major change in 1858 when it was found, empirically, that the wooden plug bullet performed just as well when 0.550″ diameter as when 0.568” “.

                                  #498885
                                  davidhurst
                                    Up
                                    0
                                    Down
                                    ::

                                    My order is placed as well, I look forward to shooting a real Pritchett at last!

                                  Viewing 15 replies - 46 through 60 (of 61 total)
                                  • You must be logged in to reply to this topic.