Brass mould care ???

Home › Forums › NOE Forums › NOE Archive › Historical Archive › General › Forum Questions / Problems › Brass mould care ???

  • This topic is empty.
  • Creator
    Topic
  • #488627
    kevinnelson
      Up
      0
      Down
      ::

      Hey guys recently got my first brass mould its the 311291 4 cavity.  First noe as well and the craftsmanship is really something its no wonder they cant keep stuff in stock!(i am just stoked!!!) .  But I was hoping for so literature on specifics of brass mould care to be included with the mould.  But no such luck!  All my experience has been with iron moulds and aluminum to a lesser extent(i’ve just used balistoll on them).  So in short i don’t even know if i should oil this thing or not or if so what kind of oil to use!  I can tell this thing is going to go the distance and last a lifetime if properly cared for so i assume there should be some regiment to prevent brass tarnish. I’ve read some conflicting info on some of the other forms about brass mould care so at this point im scared to do anything but keep it dry.  Whats everybody’s brass mould care/storage regiments like?  Oil post casting? if so what kind?

      Thanks guys
      Kevin

    Viewing 1 replies (of 1 total)
    • Author
      Replies
    • #503050
      adamsutherland
      Moderator
        Up
        0
        Down
        ::

        I never put anything on my moulds after use. In fact I am very strict about only putting melted alloy in my moulds and smidgens of sprue lube on the bearing points.

        I suspect the answer to you questions lies in identifying what your are wanting to protect the mould from by applying something post use.

        My brass moulds seem quiet happy without anything as do my aluminium and iron ones. But then I’m in the UK and although we have a wet maritime climate humidity doesn’t seem to be a problem.

        All my moulds build up a patina of use over the years, I am quiet happy with that it helps make the moulds familiar.

      Viewing 1 replies (of 1 total)
      • You must be logged in to reply to this topic.