Correct sizing/lube die to oreder? Home › Forums › NOE Forums › NOE Archive › Historical Archive › General › Forum Questions / Problems › Correct sizing/lube die to oreder? Search for: This topic is empty. Creator Topic 2015-08-28 at 19:48 #488240 tomfuller Up0Down:: I bought the NOE mold 311299 to shoot in a 1903 and a 1903-A3 Springfield. The 1903 chamber bore dia is .306 and groove dia is .3105. The 03-A3 bore dia is .307 and the groove dia is .310. What sizing/lube die diameter should I buy? Thank you. Creator Topic Viewing 1 replies (of 1 total) Author Replies 2015-08-28 at 20:42 #499824 SwedeNelsonKeymaster Up0Down:: MIEagle As a general rule you go .0015 to .002 over groove sizeSo .311 or .312 should be a good starting place I hope this helpsBullet maker, makerAl Nelson Author Replies Viewing 1 replies (of 1 total) You must be logged in to reply to this topic. Log In Username: Password: Keep me signed in Enter an answer in digits:19 − 16 = Log In