Flying Oil Drum : Lyman 429-352 ( Just one more mold – Then I will … )

This topic is empty.

Creator

Topic
2015-09-02 at 19:47 #488247
tomelgan
Participant
Up
0
Down
::
,,, Stop. Well probably not. What with the success of the ,360 open nose wad cutter over at Closed Group Buys – I have been thinking about something along those lines for 44 special/44 mag. I’d like to see something like a Lyman 429-352 with a Crimp groove ( probably in a .432 – .434, depending on what folks would like ) – Somewhere in the neighborhood of 240 – 250 grains as a solid. Offered with an open nose in RG 2 and 4 format. A cylinder full of these look mighty ugly from the front end. Looks like an oil drum from the side. Anyone else interested. Maybe we could talk Swede into putting up a drawing to look at.
Creator

Topic

Viewing 15 replies - 1 through 15 (of 28 total)

1 2 →

Author

Replies
2015-09-03 at 00:10 #499906
paulfletcher
Up
0
Down
::
I would be interested in a WC described by Square Butte….I have the 360 ordered….a good companion for my 29…..buckwheatpaul
2015-09-03 at 00:41 #499907
Hugh Kuhns
Participant
Up
0
Down
::
That sounds interesting…like something I could use. I would like to see a drawing of it too. I’ll keep an eye on this thread.

762sultan
2015-09-03 at 02:20 #499908
charlesgilbert
Participant
Up
0
Down
::
I’d like to see a pic of it. My .44 special BH might like one.
2015-09-03 at 13:29 #499909
tomelgan
Participant
Up
0
Down
::
If I knew how to import a picture over from castpics I would. Over at Cast Boolits there are a few nice photos of this bullet if you search Lyman 429-352. I believe it’s GLL who has put up the photos in a few threads. Just don’t know how to do it.
2015-09-03 at 14:12 #499910
SwedeNelson
Keymaster
Up
0
Down
::
Can use the tool we have to make one that will be about 240Gr. with a 223Gr. HP
It would be like this one but the top lube groove would be a Crimp Groove

Bullet maker, maker
Al Nelson
2015-09-03 at 14:19 #499911
Hugh Kuhns
Participant
Up
0
Down
::
That looks like what I had in mind…count me in!

762sultan
2015-09-03 at 14:44 #499912
charlesgilbert
Participant
Up
0
Down
::
I like!!
2015-09-03 at 16:52 #499913
tomelgan
Participant
Up
0
Down
::
Substantially different than the Lyman 429-352 . Not the one I had in mind – But if folks want this one then do it. Let me know if I need to start another interest thread for a Lyman 429-352 as per original thread title.
2015-09-03 at 16:55 #499914
Hugh Kuhns
Participant
Up
0
Down
::
I could be talked into a hollow base mold. I really don’t want a solid and no cavity.

762sultan
2015-09-03 at 22:57 #499915
charlesgilbert
Participant
Up
0
Down
::
What if this one was a RG? It would look like the 360432 that is currently in a Group Buy, only bigger.
2015-09-03 at 23:49 #499916
timagnew
Participant
Up
0
Down
::
I’m in
2015-09-09 at 15:27 #499917
Hugh Kuhns
Participant
Up
0
Down
::
I like the idea Beagle 333 has. The drawing Al has provided looks just right and a solid or HP can be made with this mold for those who want it. Let’s keep this alive. How many do we need to get this on active buy status?

762sultan
2015-09-18 at 16:34 #499918
bobdavis
Participant
Up
0
Down
::
I’d like to see a pic of it. My .44 special BH might like one.

Same here?
2015-09-18 at 23:46 #499919
SwedeNelson
Keymaster
Up
0
Down
::
Something to look at

Bullet maker, maker
Al Nelson
2015-09-18 at 23:51 #499920
tomelgan
Participant
Up
0
Down
::
If your talking the lyman 429-352 in the original title to this post – It’s a great looking mold. Just don’t know how to export a picture from castpics.net site with the reference list of molds. Maybe i’ll see if I can get GLL to put a photo up here.
Author

Replies