Heaviest 9mm cast

Up

0

Down

::

I was wanting to know the heavies cast mold for 9mm. I’m aiming for the quietest 9mm load. I’m currently using a lee 6 cavity 120 gr truncated Cone that drops around 125 gn. Using hp-38 that gets me around 950 fps. Sounds pretty good but I’m seeing if I can find anything better.  I’ve used unique with these boolits as well but my fps fluctuate greatly and I can’t tell it being any quieter. Any help on the quietest load?

Topic

[Intel6Participant]

Up

0

Down

::

If you are asking for a NOE mould that casts heavy bullets for 9mm then you are looking for the 155 ELCO mould.

http://noebulletmolds.com/NV/product_info.php?cPath=34_265&products_id=1907

I was designed for heavy 9mm and works great. I got mine for making bullets for my 8 shot 9mm revolver but also use them in 9mm autos. I cast them with softer alloy since they are going slow and they come out right at 160 grs.

Below is a pic of them coated in HiTek and loaded in 9mm cases for revolver & auto and then the bullet unloaded. They have anice taper and can be loaded longer in the case depending on what your mag and throat let you do. 

 

[allenblanco]

Up

0

Down

::

Thanks I was looking at that one but couldnt find anyone talking about it and how it worked in autos. Are you shooting suppressed? I’m trying to see if it’ll be any quieter than shooting my 124gr loaded to subsonic.

[Intel6Participant]

Up

0

Down

::

Works fine in my autos and no I am not shooting it suppressed but I know conrmastah did.  We talked about it in this thread:

http://noebulletmolds.com/smf/index.php/topic,1397.msg17521.html#msg17521

And then he put a link in that thread where he shot them suppressed.

[allenblanco]

Up

0

Down

::

Excellent this is everything I was looking for

[allenblanco]

Up

0

Down

::

Just need that mold in a higher capacity

[Full.Lead.TacoKeymaster]

Up

0

Down

::

Video of that mold in action

https://youtu.be/KdhkK1ovYQI

[Author]

Replies