Help us get you what you want!

Up

-9

Down

::

We have had a very hard time getting what every one wants back on the shelves.
Check our web-store for what you want and if it’s out of stock post what you would
like and will get a run started.

Will need 5 orders to run it so get the word out.
See ” HOW WE RUN OUR INVENTORY BUYS” for the rules
http://noebulletmolds.com/smf/index.php/topic,1624.0.html

And you will get the same discount (15%) as a group buy.

NOTE:
This is for moulds that we have ran before ONLY!

Bullet maker, maker
Al Nelson

Topic

[Hugh KuhnsParticipant]

Up

0

Down

::

I would like to buy 3 die bodies.

762sultan

[Mike B.Moderator]

Up

0

Down

::

Lets see if I can help you, & hopefully get a few of the next run of die bodies possibly allocated to this particular SKU: PTSD parts bin.

1. 7.62sultan        Sizing die bodies  Qty  (3)    7-12-22
2. Mike B.              Sizing die bodies  Qty  (2)    7-21-22
3.
4.
5.
6.

[Hugh KuhnsParticipant]

Up

0

Down

::

Anybody wanting sizing die bodies…sign-up here…need 4 orders to get them made!

762sultan

[Hugh KuhnsParticipant]

Up

0

Down

::

Thanks Mike for jumping in…we need a few more and maybe get on the list to run before fall.

762sultan

[Double G]

Up

0

Down

::

I need the SC311-165 RF Plain base HP for my 30 30 and 308. 

[Mike B.Moderator]

Up

0

Down

::

Double G,

May one ask since this appears to be your first posting… You do realize that you will need at a minimum four more individuals to firmly commit, & request this same mould design…

Al’s long standing requirement … not mine…

https://noebulletmolds.com/smf/index.php/topic,1624.0.html

RG2 (two cavity) or RG4 (four cavity)… Apparently you must want an Aluminum version as I do not see an out of stock NOE previous offering in an HP PB for brass? RG GC was originally available in both two and four cavities… 

Do you plan to powder coat that particular .311 diameter cast bullet design? … Or are you deliberately planning to keep your loads below 1600 FPS as you have requested the plain base version of the 311-165 HP offering.

A GC version might tend to give you more options in powder, availability, & velocity … Otherwise you might be in for a good bit of leading down the line…

If you want me to start a listing … on this SC311-165 HP request … you might possibly want to be a bit more specific in details, Please.

Your call on how to proceed….

Take Care, & Stay Safe…

[Hugh KuhnsParticipant]

Up

0

Down

::

Is the G/C seater die on the “to do ” list? I have the GC expanders but would also like the dies.

762sultan

[Mike B.Moderator]

Up

0

Down

::

1. 7.62sultan        GC seating dies  Qty 1  6-27-22, 7-12-22, 7-28-22 
2.
3.
4.
5.

[bowfinParticipant]

Up

0

Down

::

I would like to see a 360-159-SP-BG3 mold, preferably plain base.  I have been checking for a while, but no joy.

[Mike B.Moderator]

Up

0

Down

::

You might want to make sure that you also get a TP for that particular Spire Pointed bullet.

Otherwise you may dent the sharp point on that particular cast product … 

Unless you are casting with a very hard alloy…

Even then … You may also find that you need to rig up a seating die body, along with that particular moulds top punch to properly seat that spire point bullet …

I rigged up an NOE sizing die body along with an NOE TP holder to do that particular detail… so as not to mess up the spire point on that cast product spire point series … when seating or sizing… that particular cast product…

Standard seating die sets unfortunately … do not tend normally do a proper job seating unless that sharp spire point is properly supported…

Just a heads up…

Your call on how to proceed…

Take Care, & Stay Safe…

[Author]

Replies