Lyman 410459 | NOE Bullet Moulds

This topic is empty.

Creator

Topic
2014-06-01 at 13:33 #487329
robertlintner
Up
0
Down
::
Any interest in a 410459, 5 cavity?
Creator

Topic

Viewing 15 replies - 1 through 15 (of 27 total)

1 2 →

Author

Replies
2014-06-01 at 14:53 #491249
SwedeNelson
Keymaster
Up
0
Down
::
Buzzard II

Welcome to the forum
I would like to find some samples myself

Anyone have 3 or 4 that they would part with?
Would like to get a drawin up

Bullet maker, maker
Al Nelson
2014-06-02 at 02:10 #491250
mikebohannan
Participant
Up
0
Down
::
I have some and will try and get them in the mail to you tomorrow
Actually, your NOE 41 cal 220 SWC is a very close match to the H&G 258 which I think is a better overall bullet
I would very much like a new run of those when you can get to them
Really when you get down to it, either bullet will get the job done
2014-06-02 at 02:43 #491251
anthonylafleur
Participant
Up
0
Down
::
Although I have used the 410459 for many years, I never cared for the narrow front driving band. It has always performed well, but a wider front band in the “classic” Keith style is a more attractive option IMO…I also like the wider meplates in this size revolver (really wide) , as a general rule.
2014-06-02 at 21:34 #491252
jasonott
Participant
Up
0
Down
::
I would be interested in either of the 2 swc molds mentioned
2014-07-01 at 15:18 #491253
mikebohannan
Participant
Up
0
Down
::
Bump
Any interest
2014-07-02 at 16:13 #491254
brianadams
Participant
Up
0
Down
::
I’ve had great success with the 410459, but only have a 2-cavity version. I’d love to have a 5 cavity mould.
2014-07-13 at 05:18 #491255
thomasgarcia1
Participant
Up
0
Down
::
The 410459 is ok. I’d prefer a more robust meplat and fatter driving bands. I have an H&G copy. Perhaps a slightly heavier weight around 240? On the classic H&G style but slightly longer, a fatter driving band, square grease groove and fatter meplat to get the weight up a little. I’d be in for one like that.
2014-08-12 at 01:27 #491256
jasonott
Participant
Up
0
Down
::
is there any interest in this one?
2014-08-12 at 04:00 #491257
thomasgarcia1
Participant
Up
0
Down
::
Al, do you still need a 410459? Shoot me a PM and address if so.
2014-08-12 at 04:39 #491258
davidisaacs
Participant
Up
0
Down
::
I would be interested in a copy of the 410459 (maybe make it Keithier ) or the H&G 258 copy
2014-08-12 at 13:27 #491259
SwedeNelson
Keymaster
Up
0
Down
::
This is our version of the 41 Cal SWC (Keith)

Have the tooling on hand.
Could run it as soon as we can get 10 interested.

mibo has sent samples of the 410459 (thanks) and I can post a drawing if you would like
What do you say Buzzard II?

Bullet maker, maker
Al Nelson
2014-08-12 at 15:35 #491260
thomasgarcia1
Participant
Up
0
Down
::
Is the actual weight 200gr or 224gr? I’m confused.

If 220 or heavier, count me in. I’d actually like to have one drop 240 personally. Not a lot of options from 230-250. But at 220+, I’d be in.
2014-08-12 at 15:55 #491261
SwedeNelson
Keymaster
Up
0
Down
::
osteodoc08

224Gr. – corrected

Thanks
Bullet maker, maker
Al Nelson
2014-08-12 at 16:14 #491262
brianadams
Participant
Up
0
Down
::
I’ll take a 5 cavity. Thanks!
2014-08-12 at 18:06 #491263
thomasgarcia1
Participant
Up
0
Down
::
osteodoc08

224Gr. – corrected

Thanks
Bullet maker, maker
Al Nelson

I’m in as well. Is it going to be in a GC or PB or mix? HP or not? I already have a Lyman 410459 and a MP 258 but would love one from NOE. I’ll be in for a minimum of a 4c.
Author

Replies