Melting large amounts of scrap lead inexpensively

Up

0

Down

::

This is how I process larger batches of scrap lead using a cheap harbor freight weed burning torch, some cinder blocks, & a dutch oven.  I’ve tried camp stoves and such but couldn’t get enough heat (BTU’s).  The torch seems to do the job well and inexpensively.  I have not tried a turkey fryer but have heard that some people use them.  If you guys have good ways to do it, please let everyone know.

https://youtu.be/aC9xOKyDS20

Topic

[victorjonesParticipant]

Up

0

Down

::

How long do you wait between pouring and dumping your ingots? By the way, I’m 65 and DO NOT move as fast as you do.

[Full.Lead.TacoKeymaster]

Up

0

Down

::

I usually dump them as soon as the lead “freezes.”  When the molds are cold/cooler, the lead solidifies pretty quickly (like within 10 seconds or so).  Once the molds heat up a bit, it takes a little longer (like 20-30 seconds or so).  If the molds get too hot, I cool them by setting them on a damp towel for a minute or so.

[Author]

Replies