NOE .25 Hunter Pellet Penetration

Home Forums NOE Forums NOE Archive Historical Archive Using NOE Moulds Air Guns NOE .25 Hunter Pellet Penetration

  • This topic is empty.
  • Creator
    Topic
  • #489880
    rsterne
    Participant
      Up
      0
      Down
      ::

      I did a soap penetration test today, comparing the 26.7 gr. NOE Hunter pellet to a 25.4 gr. JSB King, both fired from my regulated 2560 which shoots at 52 FPE…. Here are the recovered pellets, side and front view….

      Side_zps0zzpb4cu.jpg

      Front_zpsipeb9jsb.jpg

      The head of the NOE pellet after impact was a few thou larger than the head of the JSB…. The JSB shortened a few thou more than the NOE, probably because I used 40:1 alloy (2.5% tin) to cast the NOE instead of pure lead…. The Meplat of the NOE pellet increased in diameter from 0.160″ to 0.210″, and showed a noticeable cupping as it expanded…. Even though the NOE pellet had a slightly greater SD because it is 1.3 gr. heavier, the penetration was a bit less, 120 mm instead of 130 mm…. showing that it is dumping energy faster during penetration as the flat nose of the pellet expands….

      While this is not a perfect comparison with how the NOE Hunter pellet will perform on game, it is certainly an indication that is is doing what it was designed to do….  8)

      Bob

    • You must be logged in to reply to this topic.