Nose sizer problem

  • This topic is empty.
  • Creator
    Topic
  • #489200
    russellkanno1
      Up
      0
      Down
      ::

      I’m trying to size the nose from .307 to .298.
      Ordered the .298 nose size bushing. Tried is and it didn’t work.
      Probably trying to size to much at one time.
      What different nose size bushings would I need????? 

    Viewing 4 replies - 1 through 4 (of 4 total)
    • Author
      Replies
    • #507317
      teemu
      Participant
        Up
        0
        Down
        ::

        Not familiar with nose sizing but pretty sure that is way too much to do at one time. I’ve sized max. 0.03 like .311—> .308 heavy lubed, and those where soft about 5-7 BHN lead bullets…

        #507318
        russellkanno1
          Up
          0
          Down
          ::

          After it stuck, it hit me…..
          Way to much at one time!!!!!!.
          Need to take little steps.
          Suggestions on how much to size at a time????

          #507319
          Full.Lead.Taco
          Keymaster
            Up
            0
            Down
            ::

            Lube helps too.  I am not sure which bushings to use (to help size in steps).  I know that I have tried sizing .460 bullets down to .452, and I wasn’t very successful.  The bullets either stretch in length as they are squeezed down in size, or material is scraped off and/or bullets are deformed.

            #507320
            AlvinYork
            Participant
              Up
              0
              Down
              ::

              From my experience, I would only try 0.002 at a time. I actually broke the handle off of my RCBS Lube-a-matic trying to size 0.005 at one time.

            Viewing 4 replies - 1 through 4 (of 4 total)
            • You must be logged in to reply to this topic.