Online Store & Forum Suggestions

Home › Forums › NOE Forums › NOE Archive › Historical Archive › General › Forum Questions / Problems › Online Store & Forum Suggestions

  • This topic is empty.
  • Creator
    Topic
  • #488507
    erikdorothy
    Participant
      Up
      0
      Down
      ::

      Swede / Dromia,

      Just a couple thoughts I had that might help you, to help us, to help you.

      The big challenge I face with the online store is wading through all the molds in the menu to find the ones that specifically interest me.  Much of that menu consists of many variations on the same bullet design – different cavity counts, solid and HP, brass & aluminum, etc…  For example, your first page of .355 bullets shows 20 different molds, but they are all variations on only two designs.  Finding a specific mold in the .30 cal section is a manly quest that requires a bull whip and a fedora

      My thought is that you could simplify the shopping process – and simplify it A LOT –  if you simply showed one picture of the bullet design in a menu for a specific diameter, that links to a menu of all the variations for that cherry.  This would allow us to see all of the various options for a caliber with the need to scroll through only a page or three.  This might also help with the “archive” concept of various designs you have the ability to make, but aren’t necessarily in present inventory.

      It would also help greatly if, after diameter, the molds were listed by weight from light to heavy.

      Personally, I would like to see the Ranch Dogs and Air Rifle sub forums rolled into the “general” board, as I think it might simplify someone’s quest to find a particular GB discussion.

      The overall reasoning is that easy finding simplifies buying – especially IMPULSE buying!  ;D

    Viewing 4 replies - 1 through 4 (of 4 total)
    • Author
      Replies
    • #501860
      SwedeNelson
      Keymaster
        Up
        0
        Down
        ::

        Bigslug

        Thank you very much for your input!
        We are in the process of working out a upgrade for the web store that
        address most if not all of what you have seen.
        We have grown from a inventory of $30,000.00 to over $380,000.00.
        Keep a eye on us and will see what we can do.

        Marry Christmas
        Bullet maker, maker
        Al Nelson 

        #501861
        christopherharding
          Up
          0
          Down
          ::

          Would it be possible to buy the Lyman style top punches for a particular mould on there own with out having to re purchase the mould. I tried ordering some top punches but it also puts a mould in your basket. So very expensive top punches if you buy them that way. They are useful for making cast boolit seaters

          #501862
          robertpedersen1
            Up
            0
            Down
            ::

            Bigslug, a few other members (including me) suggested similar changes last year, or earlier this year.
            I’m sure Swede had thought of it long before we made any suggestions.

            But…
            One thing I’d like to add:
            When signed in to our accounts, it could be very nice to have a little notice while viewing a mold or group of molds, stating, “You bought this on xx/xx/xxxx” next to the specific variant (Aluminum 2C GC/PB, etc).
            I know it means the server needs to handle a few more requests, database inquiries, and processes for each page request, but it’s a really nice feature on websites that have it.  (Though, admittedly, I can only think of one right now, and it’s not firearms-related: Amazon.com.)

            #501863
            erikdorothy
            Participant
              Up
              0
              Down
              ::

              A further thought I had on the matter:  It would be a great help to have an obvious link from one mold to others of the same design, but in different diameter.  For example, the 311299 and 314299; the various .432, .434, etc… version of the 429421, the .360 version of what you originally started as a .364 for the .38 S&W, and so on.

              It so often happens that we see something we REALLY like, but it’s unsizeably big or unuseably small.  A link to what might be the “yummy” diameter would lead to an instant buy, rather than kicking rocks with out heads down.  It might also help to prevent mis-ordering the wrong thing either through error or “close enough, I’ll try it” thinking.

            Viewing 4 replies - 1 through 4 (of 4 total)
            • You must be logged in to reply to this topic.