Ranch Dog TLC313-115rf

Up

0

Down

::

After looking at the 45acp and 359-175 post it got me wondering if there would be any interest in a .32 cal bullet. I think, besides the 32/20 it’s designed for, this would be great for 32 H&R mag, 327Mag and light fast rounds in 30/30 when sized .311. It also might possibly work in the M1 Carbine.

Here’s the link to Ranch Dogs drawing
http://www.ranchdogoutdoors.com/bin/TLC313115RF/bullet/sketch.jpg

Topic

[danielmauckParticipant]

Up

0

Down

::

Ooh, me likey.  Especially with a standard lube groove.

[Corvette]

Up

0

Down

::

Do you think it would feed in a M1 .30 Carbine? If so I want one…

[AlvinYorkParticipant]

Up

0

Down

::

I like the idea of a 32 specific to the 32 H&R magnum et al but the saami spec for the H&R magnum is .315. Perhaps there could be two offerings,  a .313 and a .315? .315 is also the designation for the “S&W series” : 32 S&W short, 32 S&W long and 32 S&W long wadcutter.
  However  I would certainly procure a mould as described in the url in the first post.

[davidlawrenceParticipant]

Up

0

Down

::

I would gladly like to see this mold in .315 & .311. I shoot a 30 Reece which is 38 Special case necked down to 30 caliber.

I would gladly buy a 4 cavity .311 version of this mold.

25 Remington

[Full.Lead.TacoKeymaster]

Up

0

Down

::

With the lee soupcan clone bullet being in a group buy: http://noebulletmolds.com/smf/index.php/topic,1889.0.html , is there still interest in the RD 115gr bullet?

[kevinfletcher]

Up

0

Down

::

Would be interested in this mold over the current “soupcan” clone. Like the wider meplat on the RD bullet. .315 size

[Full.Lead.TacoKeymaster]

Up

0

Down

::

any others who would be interested in this bullet?

[johnjacksonParticipant]

Up

0

Down

::

I would like one for 327.

[haroldporterParticipant]

Up

0

Down

::

I would love this one with a plain base.  Even knocking the weight back to 100 grains would be nice to bridge between 32 S&W Long and 32 H&R Magnum applications. 

Having a tumble lube design that could be used in all my .32 revolvers would be a real blessing.

[matthewsaunorasParticipant]

Up

0

Down

::

My 327 SP-101 loves cast bullets in the 115 grain range.  I’d be willing to give it a shot.

Scratch that.  The 327 is gone. 

[zanesullinsSpectator]

Up

0

Down

::

I’m still interested. Hope we can get this one going!!

[haroldporterParticipant]

Up

0

Down

::

I am still interested as well.  I hope we can make this go forward.

[Full.Lead.TacoKeymaster]

Up

0

Down

::

Ok, so of the users who still want this bullet, what diameter do you need it in?  I don’t think Al wants to run just a couple of molds in 3 different diameters, so if we can see which diameters people want most, it would be the best.

[zanesullinsSpectator]

Up

0

Down

::

Well, for me at least, it kinda depends on what our options are.

If we are only doing one size I’d like .313 or .314, that way I can size down to .311 for 30/30 easily, but still size .313 for my 32-20 and bump up and size to .314 with powder coat for my 32S&W-L & 32h&r.

If two size options, I say do .311 and .314.

If we are dropping the weight down to 100gr as mentioned by others, let’s make it .314. I don’t really have a use for that light of bullet in 30/30, 30carbine or 32-20, so I’d have no need to try and size it down.

Just my thoughts, anybody else have an idea?

[haroldporterParticipant]

Up

0

Down

::

I would be good with a .314 size as well.

[Author]

Replies