- This topic is empty.
-
Topic
-
Mike B.
With all the questions in regard NOE sizing tooling lately…
It would from the comments that I have seen that there appears to be a need for Replacement Die Bodies for all of the sizing kits, so that the newer members can purchase NOE sizing body and nose bushings to size their new mould product…
Also there appears to be a need for extra replacement die bodies for those that may want an extra body or two for the large, medium or small bushing sleeves so that each can potentially have its own sleeve if the individual so chooses…
I would like to see some Replacement die bodies put into the inventory run schedule… They also appear to be listed as out of stock… in all of the sizing kits…
https://noebulletmolds.com/site/product-category/sizing-tools/sizing_kits/
1. Mike B. 1 Replacement die body PTSD Please 4-24-21
Mike B.-
Replies
-
For all of the new members who are now looking at the NOE sizing components, you may need the attached intel if you intend to order individual components to start with rather than a set that includes one sizing die body…
“All knowledge is for good. Only the use to which you put it can be good or evil.”
Take Care, & Stay Safe…softwarejanitor
wcn2018
I’d also like the sizing body; the full $39.95 set that is listed as OOS right now with the bushing holders.
https://noebulletmolds.com/site/shop/sizing-tools/bushing-push-through-size-die/push-through-size-die-body/001-push-through-size-die-body/wcn2018
I’d also like the sizing body; the full $39.95 set that is listed as OOS right now with the bushing holders.
https://noebulletmolds.com/site/shop/sizing-tools/bushing-push-through-size-die/push-through-size-die-body/001-push-through-size-die-body/List updated as requested
Replacement die body
1. Mike B. 1 Replacement die body PTSD 4-24-21
2. Softwarejanitor 1 Replacement die body PTSD 4-26-21
3. wcn2018 1 Replacement Die Body Set PTSDB 4-27-21Sizing Accessories
1. Softwarejanitor 1 Spacer sleeve Small + Holders & Rams for 6.5 MM die set…
4-25-21Gentlemen
I just realized that I neglected to reply in regard to the NOE bushings and their purpose… to the question that was asked by wcn2018.
You could most probably say that you are more properly swaging or compressing the cast bullet’s main diameter with the Body Sizing dies… ever so slightly…
You don’t really start cutting, or more properly tearing lead off the body diameter unless you try to take too big of a step sizing down the cast bullet’s body diameter…
The Nose Sizing dies can come into play if… you find that you have cast up a bunch of bullets and then find that your dummy cartridge sample will not chamber because the nose diameter on those cast bullets are just a tiny bit too large for your particular rifles Freebore — Rifling… combination… when you are at the optimum SD – COAL for your cast bullets and your particular cartridge… Like maybe between an Italian and a Swede… wishing to utilize the same cast bullet mould and optimizing for each cartridge caliber…
Or you decide that you might want to tweak the nose diameter just a tiny bit to see if it improves your groups… by adjusting the amount of jump that your cast bullet has to travel before it actually comes into hard contact with your favorite hand gun, or long gun’s rifling… Without changing your overall cartridges COAL…
It is the seating depth, & changes in that seating depth… that most affects the end pressure that you will generate when you fire that round down range…
To nose or body size one needs the critical end component the Replacement Die Body…
Take Care, & Stay Safe…
Mike B.Matthew Fleet
Hi All,
I would like to buy the full push through sizing kit as well.
List updated 5-6-21
Replacement die body
1. Mike B 1 Replacement die body PTSD 4-24-21
2. Softwarejanitor 1 Replacement die body PTSD 4-26-21
3. wcn2018 1 Replacement die body set PTSDB 4-27-21
4. fleetmat 1 Replacement die body set PTSDB 5-06-21Sizing Accessories
1. Softwarejanitor 1 Spacer Sleeve Small 4-26-21
1. Softwarejanitor Holders & Rams for 6.5 MM die set… 4-26-21Jonathan Flammer
List updated 5-7-21
Replacement die body
1. Mike B 1 Replacement die body PTSD 4-24-21
2. Softwarejanitor 1 Replacement die body PTSD 4-26-21
3. wcn2018 1 Replacement die body set PTSDB 4-27-21
4. fleetmat 1 Replacement die body set PTSDB 5-6-21
5. youngbuck3006 2 Replacement die body set PTSDB 5-7-21Sizing Accessories
1. Softwarejanitor 1 Spacer Sleeve Small 4-26-21
1. Softwarejanitor Holders & Rams for 6.5 MM die set… 4-26-21https://noebulletmolds.com/site/product-category/sizing-tools/sizing_kits/
The replacement die body is still out of stock, but kits are listed as available. Was a run made?
The last time this happened I was able to email Al, and get him to move some to the single part listing.
This time you may have to call and get him to do the same as he is at the moment not checking the forum nor his emails, & is concentrating on production as per his last posting.
The kit page does now list the die body by itself…
Have you tried to just select that item off the kit by itself?Since you are ordering the complete kits, what you may want to see movement in are the NOE Replacement bushing sleeves.
Without one of the three sizes of sleeve (Small, Medium, or Large) you cannot mount the bushing itself (Nose or Body) to do the sizing in the replacement die body…
Normally one might want to use the appropriate size sleeve to prevent your sized bullet from turning sideways in the sleeve and potentially causing a jam of bullets in the sizing tool…
Otherwise your order may be shipped to you partially filled with follow on shipments as those parts become available, or stay in NOE processing – shipping awaiting the missing pieces of the set components to complete your order.
Then too the Replacement Bushing Sleeves may be all be allocated to the die sets with nothing showing up as individual components, as you noted in the die bodies…
softwarejanitor
wcn2018
Matthew Fleet
Jonathan Flammer- You must be logged in to reply to this topic.