360-105 grain DEWC – Multi Cal Cherry?

This topic is empty.

Creator

Topic
2017-04-29 at 21:49 #489246
Johnny_Cyclone
Participant
Up
0
Down
::
I found this design interesting:

Bullet: 105 grain Double Ended Wadcutter

Target Firearms: .38/.357 target/plinking round. With minimal recoil. Comparable to a .22 long rifle.

Ancient group buy thread with a few reviews:
http://castboolits.gunloads.com/showthread.php?6556-359-105-gr-Wad-Cutter-Group-Buy

______________

How about a Double Ended Wadcutter Group Buy where one cherry design is orbited out to.. I don’t know maybe:

.38 @.360
.41 @.412
.44 @.432
.45 @.454

Length would be the same on all, but diameters could be whatever is decided on. Ought to make the minimum order requirements to acquire the cherry a cinch?

Just a thought. Not sure its feasible, but that’s what the Discussion area is for.

I like single lube groove designs and double ended sounds sweet. To use the crimp groove during reloading is a choice. Better to have, and not need, than to need, and not have?

Anyway, that’s my Group Buy thought for the Weekend.

If this is doable I’m in for probably:
.38 @.360 — two 4 cavity aluminum
.41 @.412 — one 3 cavity aluminum
.44 @.432 — one 4 cavity aluminum
.45 @.454 — one 4 cavity aluminum

Depends on what we come up with in the end
Creator

Topic

Viewing 15 replies - 1 through 15 (of 30 total)

1 2 →

Author

Replies
2017-04-29 at 23:24 #507812
adamsutherland
Moderator
Up
0
Down
::
I have notified Al of your post.
2017-04-29 at 23:27 #507813
Johnny_Cyclone
Participant
Up
0
Down
::
dromia,

Thanks.

I also put a link to this discussion up over at Castboolits. Guess we’ll see what happens.
2017-04-30 at 00:56 #507814
rsterne
Participant
Up
0
Down
::
Just to give you a rough idea of the weights…. Assuming the 105 gr. in .360 cal is correct….

.315 cal = 80 gr.
.412 cal = 138 gr.
.432 cal = 151 gr.
.454 cal = 167 gr.

HTHs….

Bob
2017-04-30 at 16:03 #507815
SwedeNelson
Keymaster
Up
0
Down
::
Johnny_Cyclone

Lets see what kind of interest it gets – no problem doing it if we get the orders.

Bullet maker, maker
Al Nelson
2017-04-30 at 18:39 #507816
victorjones
Participant
Up
0
Down
::
I’m interested in this in .432″ and .452″. I already have the NOE 100 grn, .38 WC mould. TJ
2017-05-01 at 05:06 #507817
Full.Lead.Taco
Keymaster
Up
0
Down
::
This is a cool idea. Al, would each caliber need to be it’s own group buy? Wadcutters are always fun at the indoor range–perfectly round holes in the targets.
2017-05-01 at 13:49 #507818
SwedeNelson
Keymaster
Up
0
Down
::
Can run them all together – It would keep us from having to have 10 of each!

Bullet maker, maker
Al Nelson
2017-05-01 at 14:55 #507819
Intel6
Participant
Up
0
Down
::
I will throw my interest in for these.

Specifically interested in the larger calibers.
2017-05-01 at 20:42 #507820
tomelgan
Participant
Up
0
Down
::
Interest here as well
2017-05-02 at 13:42 #507821
Full.Lead.Taco
Keymaster
Up
0
Down
::
Al, if you can get me the drawings, I can start a group buy for this. I think it will be easy to reach 10 mold orders with this one.
2017-05-06 at 14:48 #507822
Johnny_Cyclone
Participant
Up
0
Down
::
I’m rather excited to see the drawings when they are released
2017-05-08 at 12:32 #507823
kristiankristiansen
Up
0
Down
::
Im interested in a .360-105grs 4 cavity mold.

Im also in for a .360-105grs SWC bullet, it would be perfect for target and plinking round
2017-05-11 at 21:12 #507824
Full.Lead.Taco
Keymaster
Up
0
Down
::
I believe we have 10 mold orders already. Al, if you can get some drawings to me, I can start the group buy and make it official.
2017-05-12 at 06:29 #507825
robertpedersen1
Up
0
Down
::
In for .44s.

…And .475s, even though no one else cares or asked. :'(
2017-05-12 at 16:57 #507826
Full.Lead.Taco
Keymaster
Up
0
Down
::
Group buy is now live, sign up here: http://noebulletmolds.com/smf/index.php/topic,2071.0.html

Drawing will be replaced with official one when I get it.
Author

Replies