clone of the RCBS 32-98-SWC | NOE Bullet Moulds

This topic is empty.

Creator

Topic
2015-09-07 at 17:52 #488255
Anonymous
Up
0
Down
::
Would anyone else be interested in a simple clone of the RCBS 32-98-SWC mould . I have the 2 cavity RCBS mould but a RG4 hollow point option and 5 cavity for some real production sounds really good to me .
Creator

Topic

Viewing 15 replies - 1 through 15 (of 67 total)

1 2 3 4 5 →

Author

Replies
2015-09-07 at 18:05 #500025
teemu
Participant
Up
0
Down
::
I’m interested. Got that RCBS but liked to get it NOE version also, and if possible RG mold. But my opinion is that bullets is far from SWC..It is rather FT..Well I got just that bullet on my avatar picture.
2015-09-10 at 07:48 #500026
teemu
Participant
Up
0
Down
::
One note: This bullets is working good at least in airguns. Tested in many different barrels..LW, TJ, some BP barrels, (unknown manufacture) Shilen etc.

Hope this one get’s attention,this is one of those what I would like to have NOE’s version…Like many other molds

is it my impression or is some kind of change of peoples need to get/inspired, light weight or small caliber rifle mold/bullets?
2015-09-10 at 20:51 #500027
robertking
Participant
Up
0
Down
::
I think lots of folk tha already cast are looking to replace 22lr with a centerfire. I have always liked the “little ones” and 22 rimfires, so I’m just enjoying the small caliber resurgence! I would like this in a 4 cavity PB myself, I don’t have the RCBS so I REALLY NEED this run
2015-09-10 at 20:55 #500028
teemu
Participant
Up
0
Down
::
Well 3 is good start….
2015-09-10 at 22:09 #500029
Anonymous
Up
0
Down
::
I’ve not used this bullet in airguns but I can vouch for it in 32 S&W and the 32H&R magnum. I also use it as a light bullet load in the 32 Federal magnum where it works fine. It will even group well out of the 32-20 but trying to get a S&W 1905 to shoot point of aim can get annoying.
2015-09-18 at 15:34 #500030
bobdavis
Participant
Up
0
Down
::
Well 3 is good start….

Let’s make four now I’d like a 4 cavity PB aluminium drilled for a temperature probe,Hollow point with pins to make the bullets solid going to need a Lyman type top punch too
2015-09-19 at 01:47 #500031
teemu
Participant
Up
0
Down
::
4 is better almost half way…There is several molds which I’m interested but it dosen’t help if others don’t. Well You can’t always have everything You like.
Thanks SSG Oldfart.
2015-09-19 at 23:03 #500032
stevendragonjr
Participant
Up
0
Down
::
Sure would, but I’d want to see a drawing first.
2015-09-20 at 02:58 #500033
bobdavis
Participant
Up
0
Down
::
No problem teeming,sir if you don’t mind I would like to know what kind of air gun your using????
2015-09-20 at 05:13 #500034
teemu
Participant
Up
0
Down
::
Not mind at all…I have several. Corsair .308 made in USA. Quackenbush LA Outlaw .458 made in USA, KBB .308 made on Finland, Savage which had few different uppers, .257, .452 , and BMG .510 made in Finland, Sam Yang with modifications .45 cal Made in Korea, Those are so called Big Bores then I have few “normal” airguns which shoots pellets. Hatsan 4.5mm Hammerli 5.5mm and FX 4.5mm. And I have on my mind to get also .223 and maybe .243 cal airguns… We shoot silhouette competions, bench rest competions and long range target shooting. In Finland it is against law shoot any animals on airguns so hunting isin’t possible. I cast my own bullets so thats why i’m collect those different molds
2015-09-26 at 07:39 #500035
danielmauck
Participant
Up
0
Down
::
Is the nose on that suposed to be bore riding? It would be the perfect shape to make my 7.62×25 look like tiny rifle rounds. I want to see a drawing, but I’m tempted to get my first RG.
2015-09-26 at 11:02 #500036
teemu
Participant
Up
0
Down
::

This is picture of orginal RCBS 98gr bullet. Bullet Length-0.58″, Nose Length-0.36″, Meplat-0.21″.
2015-09-27 at 04:05 #500037
bobdavis
Participant
Up
0
Down
::

This is picture of orginal RCBS 98gr bullet. Bullet Length-0.58″, Nose Length-0.36″, Meplat-0.21″.

Adding the RG Option for this bullet will make it easier for me to justify a new pistol barrel. :
2015-09-27 at 05:04 #500038
teemu
Participant
Up
0
Down
::
Yup. I’m in for sure. I could take RG4 2 PB 2 GC :
2015-09-28 at 04:45 #500039
robertpedersen1
Up
0
Down
::
As long as we’re talking about .32 cal RG molds….
Have you seen the HBWC buy that’s currently waiting on a few more buyers?
315-90-WC (HB) -5- (Active group buy)

As for the RCBS 98 RF… I don’t think I could get myself to pull the trigger, so to speak. I already have multiple versions of the NOE 314316 (115 gr FN), including a HP option. As a GC HP, the bullet ends up at about 112 gr; and as a PB FN, at about 123 gr. It’s a little on the heavy side. …But I already have the molds, and NOE runs them semi-regularly. The lighter bullet is tempting, but I’d rather spend for the 90 gr HBWC / 100 gr (solid) WC first.
Author

Replies

Viewing 15 replies - 1 through 15 (of 67 total)

1 2 3 4 5 →

You must be logged in to reply to this topic.