Load Notes For NOE & RDO Designs

Home › Forums › NOE Forums › NOE Archive › Historical Archive › Using NOE Moulds › Favorite loads › Load Notes For NOE & RDO Designs

  • This topic is empty.
  • Creator
    Topic
  • 2016-03-24 at 13:10 #488669
    Ranch Dog
      Up
      0
      Down
      ::

      Last year I started working on reloading references for the NOE bullet designs, it has gone slower than expected because of the limits of my time but also because I needed to come up with templates that would make the Load Note sheets consistent across all the types of designs and contain as much information as possible for the bullet caster. Al and I think that we have a good format that addresses as many considerations as possible when generating the data so it is time to get started. A quick look at his store’s pages confirms exactly what an undertaking this will be so rather than work from A to Z, I thought I would ask as to what the immediate need of NOE’s customer base is concerning the information to get your bullets out the barrel.

      In order to understand how the suggested loads are generated and how the pages are formatted, please read:  Pressure Notes.

      Here is what the formatted Load Note pages look like and how the information is presented: 378-275 H&H Mag

      If you recommend a bullet design, please include what cartridge you using with the design.

    • Creator
      Topic
    Viewing 15 replies - 286 through 300 (of 414 total)
    1 2 3 … 19 20 21 … 26 27 28
    • Author
      Replies
    • 2017-01-31 at 16:04 #503680
      thomascarboy
        Up
        0
        Down
        ::

        Thank you very much for the info on the 172-32-RN, Ranch Dog. Going to be interesting working with this little one.

        2017-01-31 at 21:54 #503681
        kitdavies
          Up
          0
          Down
          ::

          I would say that is the one there is only one 200gr .44 bullet on the site. Here’s the link anyways http://noebulletmolds.com/NV/index.php?cPath=37_209
          Thanks again,
          Kit

          2017-02-01 at 13:36 #503682
          Anonymous
            Up
            0
            Down
            ::

            Okay guys, thanks. I will get the list completed as soon as I can. I have to take my dad to Houston this morning but still should get to these this week.

            Update!

            Load Notes Posted:

              [*]316-169-RN 316291 7.62x54R[*]316-202-RN 316299 in 7.62x54R[*]311-195-FN GC (RCBS 311-180-FN) 30/30 Win[*]432-200-RF (PB) 44/40 Win[/list]
              Just a reminder, I normally can only generate one Load Note sheet a day.

              Check at http://www.ranchdogoutdoors.com/data to see if the notes you are looking for have been posted. If not, make a specific request via a post using the bullet ID profile and cartridge. It will be added to the back of the list. Custom data; specific powder requests, cartridges not in my database, and bores not within .003″ of the bullet’s design diameter, cannot be provided. Data is generated within the confines of templates, please see any Load Notes as a sample of what can be provided.

              It is a good idea to bookmark the link above once opened.

              Please remember that this data is for NOE’s and RDO’s use. Your use of our Load Notes is at your own risk and only meant for a comparison against other sources.

            2017-02-02 at 14:52 #503683
            Anonymous
              Up
              0
              Down
              ::

              Update!

              Load Notes Posted:

                [*]311-195-FN GC (RCBS 311-180-FN) 30/30 Win[*]432-200-RF (PB) 44/40 Win[/list]
                Just a reminder, I normally can only generate one Load Note sheet a day.

                Check at http://www.ranchdogoutdoors.com/data to see if the notes you are looking for have been posted. If not, make a specific request via a post using the bullet ID profile and cartridge. It will be added to the back of the list. Custom data; specific powder requests, cartridges not in my database, and bores not within .003″ of the bullet’s design diameter, cannot be provided. Data is generated within the confines of templates, please see any Load Notes as a sample of what can be provided.

                It is a good idea to bookmark the link above once opened.

                Please remember that this data is for NOE’s and RDO’s use. Your use of our Load Notes is at your own risk and only meant for a comparison against other sources.

              2017-02-03 at 03:06 #503684
              michaelhagey
              Participant
                Up
                0
                Down
                ::

                Nice long lists for each one!

                Thank you very much, Ranch Dog

                Mike

                2017-02-04 at 00:44 #503685
                Anonymous
                  Up
                  0
                  Down
                  ::

                  Can I get data for the 311-195-FN GC (RCBS 311-180-FN) in 30/30?
                  Also data for the 432-200-RF  PB in 44/40 for a low pressure rifle using rifle powders like h4198 and Rl7 plus others? Trying to find a safe load replicating blackpowder velocities.
                  Thanks a heap!
                  Kit

                  Kit didn’t have much luck with the 44-40 Win loads. No rifle powders would generate given the low pressure limits of the cartridge. That’s tough to do if not impossible even with the 44 Mag in strong receivers like the Rossi 92 carbines.

                  Update!

                  Load Notes Posted:

                    [/list]
                    Just a reminder, I normally can only generate one Load Note sheet a day.

                    Check at http://www.ranchdogoutdoors.com/data to see if the notes you are looking for have been posted. If not, make a specific request via a post using the bullet ID profile and cartridge. It will be added to the back of the list. Custom data; specific powder requests, cartridges not in my database, and bores not within .003″ of the bullet’s design diameter, cannot be provided. Data is generated within the confines of templates, please see any Load Notes as a sample of what can be provided.

                    It is a good idea to bookmark the link above once opened.

                    Please remember that this data is for NOE’s and RDO’s use. Your use of our Load Notes is at your own risk and only meant for a comparison against other sources.

                  2017-02-04 at 04:16 #503686
                  kitdavies
                    Up
                    0
                    Down
                    ::

                    Thank you very much for that ranch dog! I’ve been estimating powder loads using h4198 at about 24/25gn under the 44/40 bullet from some older alliant data using a 240gn with Rl7 at about 22gn(figures maybe off i’d need to check my load notes for what i did find out). I got about 1300fps with the h4198 when I did try it but I couldn’t test the pressure so I’m not going to repeat that to often. Again thanks for the data!

                    2017-02-06 at 02:16 #503687
                    stevemyers
                      Up
                      0
                      Down
                      ::

                      just now looking here, but…  Thanx Mike for providing this info thru another location I contacted you on!  VERY helpful!

                      2017-02-08 at 05:42 #503688
                      danielmauck
                      Participant
                        Up
                        0
                        Down
                        ::

                        Could you please do the 314-205 SP (310679) and the 311-247 FN (Whisper), both in 7.62x54R?  I know I have asked for a couple of these already.  And thank you for being so generous with your time.

                        P.S.  the 314-205 SP (310679) is still an active group buy, so I don’t know if you would even be able to do it just know.  In any event, there’s no need to hurry about a mould that doesn’t exist yet.  If you can get all the info you need from the drawing it is listed under its .310″ diameter.

                        2017-02-10 at 12:40 #503689
                        Anonymous
                          Up
                          0
                          Down
                          ::

                          Thanks for your comments guys, got tied up running a prescribed burn on a portion of my ranch this week.

                          nw_01a.jpg

                          Will get the data your requested Cowboy.

                          2017-02-11 at 19:38 #503690
                          Anonymous
                            Up
                            0
                            Down
                            ::

                            Update!

                            Load Notes Posted:

                              [*] 314-205 SP (310679) 7.62x54R[/list]
                              Just a reminder, I normally can only generate one Load Note sheet a day.

                              Check at http://www.ranchdogoutdoors.com/data to see if the notes you are looking for have been posted. If not, make a specific request via a post using the bullet ID profile and cartridge. It will be added to the back of the list. Custom data; specific powder requests, cartridges not in my database, and bores not within .003″ of the bullet’s design diameter, cannot be provided. Data is generated within the confines of templates, please see any Load Notes as a sample of what can be provided.

                              It is a good idea to bookmark the link above once opened.

                              Please remember that this data is for NOE’s and RDO’s use. Your use of our Load Notes is at your own risk and only meant for a comparison against other sources.

                            2017-02-13 at 00:10 #503691
                            danielmauck
                            Participant
                              Up
                              0
                              Down
                              ::

                              Thank you sir, I actually changed my order on the 311-247 to include gascheck cavities based on what Quickload’s conclusions.

                              2017-02-14 at 12:56 #503692
                              Anonymous
                                Up
                                0
                                Down
                                ::

                                Thank you sir, I actually changed my order on the 311-247 to include gascheck cavities based on what Quickload’s conclusions.

                                Good deal! A good choice of powders and velocities, a lot of utility! I was side tracked with family health stuff for a few days, I will get the request finished up today.

                                2017-02-15 at 02:28 #503693
                                Rick R
                                Participant
                                  Up
                                  0
                                  Down
                                  ::

                                  Apologies if you’ve already run it and I missed it, could you run the 311-247 gas checked through the .308 Winchester.  My Ruger rifles have 1:10 barrels hopefully it’ll stabilize. 

                                  2017-02-15 at 18:05 #503694
                                  Anonymous
                                    Up
                                    0
                                    Down
                                    ::

                                    P.S.  the 314-205 SP (310679) is still an active group buy, so I don’t know if you would even be able to do it just know.  In any event, there’s no need to hurry about a mould that doesn’t exist yet.  If you can get all the info you need from the drawing it is listed under its .310″ diameter.

                                    Cowboy, I finally figured out the confusion in finding the bullet in the database and; hence, being slow with coming forth with the data. There is a: 310-205-SP (310679) & a 314-210-SP (314679) which are one in the same other than overall bullet diameter. When I would run a search for “314-205-SP (310679)” nothing would come up because the numbers in your request are mixed a bit. I ran the data for the 310-205-SP (310679) and it will be valid for either as long as the bullet diameter is not over .003″ of your groove diameter. In other words, with a .308″ groove the data for the 310679 (+.002″ over) is appropriate, but not the 314679 (+.006″ over). Whatever your bullet minus groove sum is, the data is valid as long as the number is not over +.003″.

                                    Update!

                                    Load Notes Posted:

                                      [/list]
                                      Just a reminder, I normally can only generate one Load Note sheet a day.

                                      Check at http://www.ranchdogoutdoors.com/data to see if the notes you are looking for are posted. If not, make a specific request via a post using the bullet ID profile and cartridge, and it will be added to the list. Custom data; specific powder requests, cartridges not in my database, and bores not within .003″ of the bullet’s design diameter, cannot be provided. Data is generated within the confines of templates; please see any Load Notes as a sample of what can be provided.

                                      It is a good idea to bookmark the link above once opened.

                                      Please remember that this data is for NOE’s and RDO’s use. Your use of our Load Notes is at your risk and only meant for a comparison against other sources.

                                  • Author
                                    Replies
                                  Viewing 15 replies - 286 through 300 (of 414 total)
                                  1 2 3 … 19 20 21 … 26 27 28
                                  • You must be logged in to reply to this topic.