- This topic is empty.
-
Topic
-
Ranch Dog
Last year I started working on reloading references for the NOE bullet designs, it has gone slower than expected because of the limits of my time but also because I needed to come up with templates that would make the Load Note sheets consistent across all the types of designs and contain as much information as possible for the bullet caster. Al and I think that we have a good format that addresses as many considerations as possible when generating the data so it is time to get started. A quick look at his store’s pages confirms exactly what an undertaking this will be so rather than work from A to Z, I thought I would ask as to what the immediate need of NOE’s customer base is concerning the information to get your bullets out the barrel.
In order to understand how the suggested loads are generated and how the pages are formatted, please read: Pressure Notes.
Here is what the formatted Load Note pages look like and how the information is presented: 378-275 H&H Mag
If you recommend a bullet design, please include what cartridge you using with the design.
-
Replies
-
brigettecuneo
Thanks!
You’re welcome!
All we have around here early in the morning is raccoons. You Sir, have a lucky spot. Lol
Thank you for the new 45 auto load cards.
Never shot a 375 marlin. How does it shoot? hog hide is tough so I bet it packs a solid punch.Yeah, I’m a lucky dude.
375 Win is just is really just a modern 38-55 Win, a great deer/black bear/hog cartridge. Only been elk hunting once and passed on what I saw but I would use it with bulls responding to a bugle. Never been moose hunting but it seems a lot of that is close range so I would use it on one. A bit more punch that a 30-30 Wn/35 Rem but not as much as a 444 Marlin/45-70 Govt.
joeclose
Hi Ranchdog, if possible could you run me the NOE 268-134-FN in 6.5X52 please.
Thank you,
CloseyClosey, the NOE database I use lists the design as the 270-134-FN so that is how I ran the data. As long as your bore groove is within .003 of your bullet’s diameter of .268″ (.265, .266. or .267), the posted data is valid.
Update!Load Notes Posted:
- [*]270-134-FN 6.5×52 Carcano[/list]
Find at http://www.ranchdogoutdoors.com/data
Load Notes Pending:
- [/list]
Just a reminder, I normally can only generate one Load Note sheet a day.Check at http://www.ranchdogoutdoors.com/data to see if the notes you are looking for have been posted. If not, make a specific request via a post using the bullet ID profile and cartridge. It will be added to the back of the list. Custom data; specific powder requests, cartridges not in my database, and bores not within .003″ of the bullet’s design diameter, cannot be provided. Data is generated within the confines of templates, please see any Load Notes as a sample of what can be provided.
It is a good idea to bookmark the link above once opened.
Please remember that this data is for NOE’s and RDO’s use. Your use of our Load Notes is at your own risk and only meant for a comparison against other sources.
micaelnetz
Closey, the NOE database I use lists the design as the 360-156-SP.
Update!Load Notes Posted:
- [*]360-156-SP 357 Mag[/list]
Find at http://www.ranchdogoutdoors.com/data
Load Notes Pending:
- [/list]
Just a reminder, I normally can only generate one Load Note sheet a day.Check at http://www.ranchdogoutdoors.com/data to see if the notes you are looking for have been posted. If not, make a specific request via a post using the bullet ID profile and cartridge. It will be added to the back of the list. Custom data; specific powder requests, cartridges not in my database, and bores not within .003″ of the bullet’s design diameter, cannot be provided. Data is generated within the confines of templates, please see any Load Notes as a sample of what can be provided.
It is a good idea to bookmark the link above once opened.
Please remember that this data is for NOE’s and RDO’s use. Your use of our Load Notes is at your own risk and only meant for a comparison against other sources.
Good afternoon Mr. Ranch dog,
When you have time can you please make load cards for the
NOE 502-322-swc
NOE 502-404-swc
NOE 502-485-swc
For the Smith and Wesson 500 magnum please. I’m more wanting again the load information for the hp versions of the 3 rg molds.Can you also include the ramshot enforcer and accurate 5744 powder for the data? Thank you again for your help.Good afternoon Mr. Ranch dog,
When you have time can you please make load cards for the
NOE 502-322-swc
NOE 502-404-swc
NOE 502-485-swc
For the Smith and Wesson 500 magnum please. I’m more wanting again the load information for the hp versions of the 3 rg molds.Can you also include the ramshot enforcer and accurate 5744 powder for the data? Thank you again for your help.I will run them.
Mountain Man,
On the 502-485-SWC, I need a little help. Could you tell me if this is the bullet in the drawing on this page: http://noebulletmolds.com/NV/product_info.php?cPath=43_429&products_id=3314
I’m wondering if the drawing is wrong on this page?
Update!Load Notes Posted:
- [*]502-320-SWC HP 500 S&W[/list]
Find at http://www.ranchdogoutdoors.com/data
Load Notes Pending:
- [*]502-404-SWC 500 S&W[*]502-485-SWC 500 S&W[/list]
Just a reminder, I normally can only generate one Load Note sheet a day.Check at http://www.ranchdogoutdoors.com/data to see if the notes you are looking for have been posted. If not, make a specific request via a post using the bullet ID profile and cartridge. It will be added to the back of the list. Custom data; specific powder requests, cartridges not in my database, and bores not within .003″ of the bullet’s design diameter, cannot be provided. Data is generated within the confines of templates, please see any Load Notes as a sample of what can be provided.
It is a good idea to bookmark the link above once opened.
Please remember that this data is for NOE’s and RDO’s use. Your use of our Load Notes is at your own risk and only meant for a comparison against other sources.
That is the correct mold. There was another mold made that was for pure lead and wondering if there was a minor mistake there in the weight differences vs the normal wheel weight measure. What I can say for certain is, that’s the right one I was talking about,lol.
I was expecting boolits in the 461ish range for the HP portion.
I wish I had more information for you Sir. Thank you for making the 320 grain load card and adding the powders I use for this set. It makes life a lot easier on my end for sure.
brigettecuneo
joeclose
micaelnetz
if you’d like to…- You must be logged in to reply to this topic.