- This topic is empty.
-
Topic
-
Ranch Dog
Last year I started working on reloading references for the NOE bullet designs, it has gone slower than expected because of the limits of my time but also because I needed to come up with templates that would make the Load Note sheets consistent across all the types of designs and contain as much information as possible for the bullet caster. Al and I think that we have a good format that addresses as many considerations as possible when generating the data so it is time to get started. A quick look at his store’s pages confirms exactly what an undertaking this will be so rather than work from A to Z, I thought I would ask as to what the immediate need of NOE’s customer base is concerning the information to get your bullets out the barrel.
In order to understand how the suggested loads are generated and how the pages are formatted, please read: Pressure Notes.
Here is what the formatted Load Note pages look like and how the information is presented: 378-275 H&H Mag
If you recommend a bullet design, please include what cartridge you using with the design.
-
Replies
-
Greg Parsons
Ranch Dog,
I could have sworn you had posted this, 412-237-SWC 41 Mag, but I can only find the data on your site for the 41 spec.
If you could I would love to have it for the 41 Mag too.There was also a boolit that is no longer listed so I don’t know if he still has the info, but there was a mold I got a few years ago just marked 41LFN from cast booits forum buy back in the day. I have used it, but was just wanting some more ideas on other powders I could use besides my standby of Unique. If you can get ahold of the info I would love it for both mag and spec.
Thanks,
GregRanch Dog,
I could have sworn you had posted this, 412-237-SWC 41 Mag, but I can only find the data on your site for the 41 spec.
If you could I would love to have it for the 41 Mag too.There was also a boolit that is no longer listed so I don’t know if he still has the info, but there was a mold I got a few years ago just marked 41LFN from cast booits forum buy back in the day. I have used it, but was just wanting some more ideas on other powders I could use besides my standby of Unique. If you can get ahold of the info I would love it for both mag and spec.
Thanks,
GregI guess the data for the referenced bullet was not worked up for the 41 Mag, knocked it out this morning.
If you can figure out what bullet the “41LFN” was; a drawing or the bullet nose and overall lengths, plus weight, I can run it. If you cannot get it identified, just get those averages from 10 of your bullets.
Update!Load Notes Posted:
- [*]412-237-SWC 41 Mag[/list]
Find at http://www.ranchdogoutdoors.com/data
Load Notes Pending:
Just a reminder, I normally can only generate one Load Note sheet a day.
Check at http://www.ranchdogoutdoors.com/data to see if the notes you are looking for are posted. If not, make a specific request via a post using the bullet ID profile and cartridge, and it will be added to the list. Custom data; specific powder requests, cartridges not in my database, and bores not within .003″ of the bullet’s design diameter, cannot be provided. Data is generated within the confines of templates; please see any Load Notes as a sample of what can be provided.
It is a good idea to bookmark the link above once opened.
Please remember that this data is for NOE’s and RDO’s use. Your use of our Load Notes is at your risk and only meant for a comparison against other sources.
Thank you for the data,
And I found the bullet, 413-230-LFN is it. I missed it the other night when I was looking for it.Greg
You’re welcome. I will look it up and get data for it, but it will be Thursday/Friday before I run it. I’m taking my dad to Houston today for a post surgery Dr. visit. I’d rather be doing load data than facing the drive.
Just drive careful, hope everything with your dad is ok.
Thank you, Greg, it all went well. He is recovering from a shoulder replacement, just about done with it.
I posted the info for the 413-230-LFN 41 Spl, but not the 41 Mag. When the crimp groove on this bullet is used, it exceeds the cartridge overall length.
Not sure if you can use data at the 1.660″ length? If so, I will post it.
birgendekeyser
micaelnetz
Hi Ranch Dog,
I would be very interested in load data for the new 358-128-RN GC in 9mm Luger.
http://noebulletmolds.com/NV/images/N.O.E._Bullet_Moulds_358-126-RN_(GC)_Sketch.JpgThank you
OnkelHi Ranch Dog,
Can you create a load note for the 6,5mm Arisaka, using the 268-140-FN HUNTER mold?
Can you also include the following powders:
– IMR 4198
– Accurate 5744Thanks,
BirgenCould you provide a link to the bullet you are referencing please, it is not in my database that Al gave me.
Here is the link to the mold.
http://noebulletmolds.com/NV/index.php?cPath=27_451&osCsid=3e18i3oov5rplv0ijp7lpqtnn1Kind regards,
BirgenJust drive careful, hope everything with your dad is ok.
Thank you, Greg, it all went well. He is recovering from a shoulder replacement, just about done with it.
I posted the info for the 413-230-LFN 41 Spl, but not the 41 Mag. When the crimp groove on this bullet is used, it exceeds the cartridge overall length.
Not sure if you can use data at the 1.660″ length? If so, I will post it.
Weird, I didn’t think it was that long, but it fits in my Ruger and S&W just fine.
Greg
Ranch Dog,
I am about to start loading the NOE 148gn Hollow Base Wadcutter in .38 Special. I use only Vihtavuori N310 and N320 and sometimes HP for target loads. The slower powders just won’t give the required accuracy.
http://noebulletmolds.com/NV/index.php?cPath=35_304
Since your rule is to include only powders that will fill more than half the case those would not be in any charts for 38 Special. Would you consider making an exception for target use in this caliber?Onkel
Apologies for the delay. Came home from my 10 day trip to a wide range of issues that demanded my attention. Almost makes it not worth leaving.
Waiting on drawings for both the 268-140-FN and 358-128-RN. The product image does not have the data I need to run the data.
Ranch Dog,
I am about to start loading the NOE 148gn Hollow Base Wadcutter in .38 Special. I use only Vihtavuori N310 and N320 and sometimes HP for target loads. The slower powders just won’t give the required accuracy.
http://noebulletmolds.com/NV/index.php?cPath=35_304
Since your rule is to include only powders that will fill more than half the case those would not be in any charts for 38 Special. Would you consider making an exception for target use in this caliber?Onkel
I went ahead and ran the two Vihtavuori powders individually, these numbers would be considered a Max load. COAL is the length of the brass (1.135″), and velocity from a 5″ barrel.
N310, 2.0-grains, 52% fill, 748 FPS, and 100% burnt.
N320, 2.5-grains, 66% fill, 816 FPS, and 100% burnt.
Update!Load Notes Posted:
- [*]460-315-RF 458 Win Mag[/list]
Find at http://www.ranchdogoutdoors.com/data
Load Notes Pending:
- [*]413-230-LFN 41 Mag[*]268-140-FN Hunter 6.5 Arisaka[*]358-128-RN 9mm Luger[/list]
Just a reminder, I usually only generate one Load Note sheet a day.
Check at http://www.ranchdogoutdoors.com/data to see if the notes you are looking for are posted. If not, make a specific request via a post using the bullet ID profile and cartridge, and it will be added to the list. Custom data; specific powder requests, cartridges not in my database, and bores not within .003″ of the bullet’s design diameter, cannot be provided. Data is generated within the confines of templates; please see any Load Notes as a sample of what can be provided.
It is a good idea to bookmark the link above once opened.
Please remember that this data is for NOE’s and RDO’s use. Your use of our Load Notes is at your risk and only meant for a comparison against other sources.
Greg Parsons
birgendekeyser
micaelnetz
jamestroup
_Sketch.Jpg){kind=link}
- You must be logged in to reply to this topic.